Five stars is not enough for the work that Cliff's Welding performed. I told them that I wanted to…read morebe able to haul 5th wheel and gooseneck trailers with my RAM 3500 dually and they took it from there. They fully answered all of my questions and provided a very reasonable quote. I left my truck with them and shortly thereafter received a call that it was ready. The work was performed superbly with fine detail, and everything was perfectly lined up and ready to go. I haul trailers for a living and am perfectly satisfied with their work and products provided. The staff is very professional and takes the time to show their work while explaining its operations.

I have gone to Cliff's for 15 years every time I bought a new vehicle to tow behind my motorhome…read more They pare superior in their workmanship, Customer Service and price. I highly recommend them to anyone who's wanting to flat tow a vehicle behind their motorhome. Corey is very personable and helpful at the front desk.

Worst experience I've had with a shop in a long time…read more I went out of my way to be as transparent and easy to work with as possible. I sent them a detailed message explaining EXACTLY what I wanted done to my Mustang -- full exhaust setup, how I wanted it mounted, clamps, O2 bungs, everything. I literally did their job for them and made it easy. All I asked for was a rough price range before driving OVER AN HOUR to their shop. Not an exact quote. Just a simple "around this much depending on fabrication." Any decent shop can give a ballpark estimate. Instead, they ignored most of my message, barely communicated, wouldn't answer straight, and kept pushing me to drive all the way over there just for them to look at the car for 10 minutes. I called multiple times and it felt like they genuinely did not care about wasting my time. Then they acted like what I was asking was unreasonable and basically said no shop in Arizona would do what I wanted. Funny enough, less than 10 minutes later I found another shop that actually knows how to communicate, gave me a price, and scheduled me immediately. What made it even worse was seeing them joke on Instagram stories about "if you're not a good customer we don't want to work with you." Meanwhile I was being EXTREMELY clear, respectful, transparent, and serious about spending over $1,000 with them. So if THIS is how they treat someone trying their best to be a straightforward customer, imagine how they'll treat everyone else. Communication was trash, customer service was trash, and they lost themselves an easy customer because of their ego.

I highly recommend this shop for exhaust, emissions issues, and any welding work. My experience…read morewith Rosco was phenomenal. He is highly professional, knows exactly what he's doing, and quickly pinpointed the real issue with my exhaust system. I had failed the emissions test with a P0420 code, which usually means the catalytic converter needs replacing. I went to several VVRP-authorized auto shops for quotes, and all of them told me I'd need to leave my car for 2-3 days, with repair estimates ranging from $2,500-$4,500. The problem? My car is only worth about $2,000! Rosco turned out to be a lifesaver. Using his diagnostic tools, he determined it was only a sensor issue. The part cost just $100, and he replaced it in about 5 minutes. After driving 75 miles on the highway, my car passed the emissions test without any problem. It's rare these days to find an honest and ethical mechanic, but Rosco is exactly that. Go here first--you'll get a clear, honest diagnosis and save yourself from breaking your wallet. Moreover , I am still hunting him down to pay for his services with many calls and text messages. He ignored to get paid A truly nice mechanic

I needed some repairs on an exhaust system Wade installed seven years ago, (I blew out one the…read moremuffler seams). I ordered the same mufflers, because they sounded good and lasted 7 years. I was in and out in under two hours. While they had it up on the lift, they replaced four hangers and made sure the 3" exhaust pipes in my 66 GTO were still positioned correctly. No noises from suspension travel, and sounds perfect. It's good to see the next generation performing great work.

They had to cut my exhaust in order to install it, which was the first red flag, although I must…read moreadmit it does seem to be staying in place quite well. I know this, because I had to go under my own vehicle and torque the nuts to spec after driving 500 miles, which is recommended. I mentioned this at the time of install and the guy told me that they would be able to handle it for me for FREE when the time came, which I think should be expected considering that every new exhaust should have this treatment. Instead, when I called back they told me that I would have to pay, and then couldn't even give me a straight quote. I was only able to reach two of the nuts on the exhaust, but they didn't need any tightening luckily. Here's to hoping that any other nuts are torqued to spec, because I can't afford to be overcharged at this point in my life.

Outstanding quality, service and value. Kyeler is a true…read morecraftsman. He responded right away, gave me a reasonable quote, picked up the item, did a beautiful job on a complicated and delicate antique piece and dropped the item back at my house in less than 24 hours. I am delighted. I highly recommend this business.

Great experience overall, He was quick and showed up on time and did all the right things. was able…read moreto asses the problem and provided a better fix then the other. Price was right for the work he put in. Fixed a side gate so well my dogs don't even notice its opening now because its not dragging on the ground. Will call him again if i have the need.

Easy to schedule, accurate estimate. Great mobile service with all of the required tools to sharpen…read morea hedge trimmer and replace blades on a 48 inch John Deere S160 mower. Fair price (same as estimated) quality work! Will use again.

Responded quickly and scheduled within 2 weeks. Worked on our 2 riding mowers: a John Deere and…read moreHusquvarna. Thorough maintenance service without pushing unnecessary services. One and done! Much appreciated and reasonably priced!

Great working with the owner, Doug and his crew . Able to retro- fit my broken basketball hoop and…read moremake it brand new . The teenagers will be happy . Thanks Doug and Jill

Totally overpriced. Made a purchase of almost $400 and returned 2 weeks later because I needed some…read moremore of the same material (steel squares tubing). I assumed that they would charge me the same but they wanted roughly 25% more. I passed and found a different metal supplier in Chandler which charged me $257,- instead of the $387 which AZ Metals quoted me. That's a difference of 50%. Total ripoff.

The owner and lady who works there are the most generous and kind people that I came across on…read more Only reason that I purchased my first tractor from here is the value these people provide. All tractors break but when that happens, I can count on these folks to help me.

Mary provides the best customer service I have ever received. She made getting the warranty work…read moredone before my warranty expired in 2weeks seamless. She really went above and beyond to get the job done. She called me regularly to communicate when and who would be doing the work. Even with the service waitlist, she made sure the tractor was assessed and parts were ordered before the expiration date. I have never had anyone personally or a company make this much effort for someone who did not even buy the tractor from them. It was extraordinary and they will have me as a customer for my next tractor.

Quality work, good communication, timely results and a fair price. What more can you ask for?…read moreThomas was one of the business that reached out to me on a metal working project that I had posted on Yelp. He commuted directly and quickly asking to see pictures of the project for a rough quote sharing that seeing the actual project in person would be best. We set a time to meet and I brought my vehicle to him. He offered alternatives and levels of finish work depending on the desired end result. The work turned out great and although he had given a window in which it may not be done same day-he did complete it on time and for what I felt was a fair price. I would not hesitate in having Thomas work on any future projects and will recommend him to people with welding needs.

Thomas did an amazing job with my shelf! I wanted a more heavy duty shelf for my bathroom so he…read morecustom made one to fit perfectly and all for a great price! He was very quick and professional with his work.