4Peaks Tactical delivered flawless work on my competition CZ TS2…read more They installed a 2 lbs trigger with precision. The break is crisp, predictable, and consistently light. Reset is short and instant. Cerakote bronze finish is even, matte, and professionally masked. No overspray, no runs, no uneven edges. Fit and function were tested before return. The gun cycles cleanly and groups tightened immediately.

Great place, with great knowledge, and great customer service. Kent and Ted do not hesitate to…read morehelp in any way they can, and have always provided a great buying experience. The shop dog Thor is also happy to talk Milkbones!

Weird vibes and a weird smell in this shop. I wouldn't stop here again, as a woman. Very limited…read moreammo selection. And unhelpful male staff who made weird attempts at humor when I asked who worked there and if they had more of a certain ammo I was purchasing. The woman working there was helpful and kind when I needed to check out. The two stars are for her, apparently the only staff member dedicated to a positive customer experience. I always make an effort to shop small and local, but this was disappointing.

Called looking for something obscure and coincidentally he had a few in stock. Over the phone he…read morewas very helpful and when I got there he knew what he had could be sold for much more due to its obscurity but to my surprise it obviously isn't ONLY about profit to him; he genuinely likes his customers. Thank you so much for being helpful and kind!

OPTIC CUT/SLIDE MILLING BEWARE!!!…read more I took my gen 5 Glock 26 slide to Glockmeister for their optic cut service. I brought my optic in to ensure that the correct cut would be made and it would fit before dropping it off for service. I received a call exactly a week after I dropped off my slide letting me know that it was ready for pickup. I also had a compensator installed at the time of pickup as well as the optic being attached without being shown the actual work done. I was so focused on the compensator and over all look of the build as a whole, that I did not notice the big gap between the slide and the optic until I had gotten home and noticed you could see the screw as well as the blue loctite in a picture I had taken. I immediately drove back to the store and informed the employee of the issue, to which he instantly got upset and started raising his voice. He began trying to gaslight me into thinking there was nothing wrong with the cut at all and that "sometimes that happens with custom work". When I brought up the fact that the gap is bigger on one side and the optic is crooked, he claimed it was not crooked and there was nothing wrong with it as he installed it himself and didn't see anything, refusing to acknowledge or address the issue. I walked out at that point and decided to get a second opinion from Southwest Precision Arms the next day after being referred to them by a friend. They removed the optic for me and were able to show and explain just how bad the work done by Glockmeister actually was. According to them, it was the worst cut they had seen in the past 10 years of the business and that my slide was ruined. The cut was made way too deep, causing the screw hole nearest the extractor to only have maybe a thread and a half at most before actually hitting the extractor. There was also a strip of even more material removed than the already too deep cut itself in the very back, causing the optic to never be able to make full contact/sit flush even if it did fit correctly. Upon receiving this information I drove straight back to Glockmeister to see if I could get in touch with the owner about the situation. I was met with the same employee who claimed that there was no way to get in touch with the owner as he is camping deep in the woods. I began explaining the ruined slide situation again as calm and collected as possible and was met with more aggressive behavior and complete denial or acknowledgement of anything being wrong with my slide or the cut at all. After some back and forth I was offered "like $75", then finally offered a refund if I was not happy with the work. Still no acknowledgement of any wrong doing at all. I denied the refund as this is beyond just not being happy with the work. I am now writing this review in the hopes that I can somehow get in contact with the owner to make the situation right as well as to warn others if they are thinking of getting their slide milled for an optic at Glockmeister.

Every time I do business with the guys at this store I'm treated respectfully and attentively! Gary…read moreand Adam are always courteous and helpful, whether I'm buying, selling or having work done on any of my Glock pistols! They typically have a nice selection of a variety of pistols, both new and used, that are fairly priced. Stop in and check them out.

Cave Creek Guns is operated by two of the best gun guys you'll ever meet or do business with…read more Beyond highly knowledgeable and professional, George and Jeff put quality and customer service above all. The creator and owner of the world famous BTE (Battle Tested Equipment) is the George behind Cave Creek Guns. You'll never find a better built AR platform. Jeff brings his experience with the collectible and classics. Not only the best gun store in Arizona, I would contest the best in the WORLD!

George and his staff know their stuff! They were very helpful and answered all my questions and…read moreconcerns. They have a wide selection of firearms. Will definitely be back for all our gun needs!

Great shop, very professional. Great prices, can't wait to go back. Jacob and Chase helped out with…read morewhat I needed and there was so much to choose from.

Elite Ordnance made my transaction and sale so simple and easy going! I got in contact with them a…read morefew weeks ago about a handful of handgun and riffles I needed off my hands and they walked me through all of the possibilities! They were very hospitable and patient with me as I was just trying to make the best decision possible. I believe that was the case! They gave me the best offers in the valley. Highly recommend working with Chase he is a great addition to his team and the way that place is ran! Good job Elite Ordnance

I've been customer of Stephen's for a while. He is a very skilled, old-world craftsman and a…read moregentleman. He's worked on several of my guns including today, installing a new trigger on my older AR-15. His work is absolutely the best and he's a gem to work with. 100 out of 100 stars.

Gunsmith's name is "Steve". What a nice man! Add to it being a very competent & efficient gunsmith…read more I brought him my Taurus Tracker and the specific platform necessary for the installation of a new ADE RD3‑019 (RMR green dot scope.) After consulting with my ChatGP "buddy\advisor" specific screws were crucial to successful install. I purchased them separately from Amazon. Steve didn't like the head tapering. He asked permission to use his own screws. Upon my affirmation, he proceeded to his belt sander to make custom length modifications on his own screws. He treated my Tracker like a surgeon with his scalpels being a host different punches, screwdrivers, and Allen wrenches. He was intriguing to watch! Not only did he calibrate my scope perfectly, I asked him if he could take a quick look at my 9mm semi with a green dot laser to check its alignment. "No problem". Done in a jiffy. I can't recommend Steve more highly!

I bought an inexpensive doublestack 1911 and after about a 1000 rounds realized it needed serious…read morework. Gunsmithing was excellent. Looks awesome, trigger job is nice and crisp, and it now locks back with empty magazines. Highly recommend.

Awesome provider for firearm services they do everything. Engraving Cerakote, trigger jobs, scope…read morezeroing ( with some serious expensive looking devices) I always feel like my scope is canted well not anymore! good attitudes and prices are fair. Since they are an actual manufacturer which is likely why they have things you cant find anywhere else. The optics line they import (exclusively if I'm not mistaken)amazing Billet Aluminum alloy! and they have night vision laser/ ir set ups better and smaller than anyone else somehow for less and the awesome pop up optic! so durable they were seriously dropping it on the ground just to show it could withstand abuse! I saw it with multiple customers. The online store has more inventory than the actual gunsmithing / storefront but I come in to see the consignments they have since thats not online. a whole wall of mauser world war 2 rifles from 5 different countries and a 1911 thats chambered for 357 mag! Even actual Joe foss owned Guns used in the war by Joe foss himself. I have a go fund me if anyone wants to help a financially challenged student get a Reaper pop up red dot optic on my 2011!! Im looking to be one of the first civilians to own a Di optic Reaper pop up! in the Marine corps they used one on the .50 not a reaper but a DI optic unit (much larger I saw one in the display) it was the only red dot that did not succumb to SIDS! you know sudden infant death syndrome! it really shakes the hell out of em!

Excellent work, fair pricing, and very knowledgeable. I was impressed with the attention to detail…read moreand would definitely use him again." "Great communication and professional service. The work was completed as promised, and everything looked excellent." "Very knowledgeable gunsmith. Took the time to explain the work and answered all my questions. Highly recommended." "Quality work and reasonable prices. Turnaround was good, and the finished work exceeded my expectations."

Solid, professional with a great work ethic. Fair and fast service. Did great work in two of my…read moreguns. I highly recommend Bob. He is flexible and accommodating. Communications are timely, and he meets his delivery promises. I will use him again. I'm a very happy customer.