Went here to have a piece of equipment modified to take a new can I bought. The gentleman I dealt with was very professional and knowledgeable, speaking with him put me at ease with the work that needed to be done. Their prices for the scope of work I wanted done was by far the lowest I had found, the timeline they quoted was hit to the exact day and the when the work was completed it was perfect! I would recommend this shop ten times out of ten! read more

Dropped a rifle off for a barrel threading and break install. They certainly over delivered. Everything about this experience was positive, from the interaction with the staff to completing my job much faster than they anticipated. Definitely will go to them again when I need firearm work. read more

Wright will do you right! Their attention to detail and the way in which they care for you firearm as if it were their own shows! From the front desk to the gunsmith your firearm will be well taken care of and will be serviced by the best. read more

Hello, I have had many things done to my Weapons. Triggers installed ,optic cuts ,Red dots just name a few. Been happy with all the work. It has been timely and they have kept me informed. Thank You and I will be BACK! read more

Wright Armory - Guns & Ammo Near Me - Mesa, Arizona

I had two guns milled for red dot optics. A Glock 43X and a CZ 75SP01. The work on both of these guns was excellent. Both were returned in under 10 days. The staff at the front desk is extremely friendly and knowledgeable, and the prices are very reasonable. if I have any other work done, Wright Armory is my go to gunsmith! read more

This'll be my go to for work outside of my abilities/lack of tools. Friendly service, professional staff. Work I needed was done in one day.

I admit to being new to guns. Like millions of others, the summer of 2020 convinced me to buy a gun. I approached the purchase as any other project, and started my work online, looking up facts, reviews, and then carefully considered what I needed. There are, however, things that are not online; things only a professional would know and, for that, I reached out to a number of businesses with honest inquiries. Wright Armory took the time to write me back, not with any formula, or cursory answer, but as one human to another. Real answers, written with genuine concern for my needs. For that reason, I can't recommend them highly enough. read more

They did a great job installing my upgraded ejector on my Marlin 1895. Same day service is unbelievably fast. read more

Wright Armory - My Marlin 1885, 45-70 caliber - Guns & Ammo Near Me - Mesa, Arizona

Got in on one of their cerakote deals on a project gun that I recently had built. The slide on this gun had some surface rust and needed some special attention. The work done by Wright Armory was spectacular. I have done and will continue to have done various work from this vendor. They do a great job! Keep up the excellent work! read more

Both times I brought my guns to Wright Armory I received excellent customer service. The quality of the work was great as well. I will definitely use Wright Armory for my future needs. read more

I've had them work on a revolver, an auto pistol and a lever action shotgun, they've done what they said at a decent price.

Absolutely love this place! Their team is committed to service and excellence and it shows! They took their time and the product could not have come out better! I brought in a shotgun purchased for my husband for Father's Day and had submitted my graphic online prior to coming in. After seeing what the shotgun was made of they did multiple tests to see if it would hold in the area of the gun I was hoping to engrave. They let me know not only would it not be as vivid in appearance it may fade overtime bc of the material and even pull at my husband's facial hair - all thing I would not have thought of on my own! They really treat you and yours as their own that is something you just don't find anymore! After testing it out and finding a better placement that would last they even added a US flag for me which was a perfect touch for my veteran husband! Thank you so much guys!!! We will be back! read more

Wright Armory - Guns & Ammo Near Me - Mesa, Arizona

Wright has cut serrations and Cerakoted one slide, cut in for optics and Cerakoted another and NP3+ the complete innards of sub-carbine for me,, their workmanship and finishes are factory good or better. I am always confident having them work on my stuff. read more

Decided to finally build some Robar Glocks and with the help of Brian Wright, my dream came true! Wright Armory has amazing customer service and owner Brian answered all of my questions from beginning till the end. Great communication. Wright Armory performed my front cocking serrations and the NP3+ finishing for my slide and internals. End product came out PERFECT!!! Couldn't be happier!!! Thank you Brian Wright & Wright Armory!!! read more

Wright Armory - Wright Armory NP3+/Norton Special x Robar Customs LLC - Guns & Ammo Near Me - Mesa, Arizona

It Happened on Mulberry Street! I was having trouble with the slide on my S&W EZ 9mm. I went to Wright Armory at 250 S. Mulberry St. #102 in Mesa. The nice man at the desk took a quick look at the problem. He took my gun back to the gunsmith and he had it fixed in about 5 minutes. What seemed like a big problem was a quick fix for the great gunsmith at Wright Armory. The kicker is that they did not charge me anything for this service. I will recommend Wright Armory to everybody. . . Mr. Buchanan read more

I've been in a couple times now and am impressed at their quality and capabilities. It's nice to find a gunsmith that works on all firearms. I'm pretty savvy with most things. I can change out triggers, safeties, gun sights, some repairs and light modifications. There are a lot of things that I can't do, don't want to do, or I just want somebody to do it better than I can. That's where these guys are great. Last time, the turnaround time was amazingly fast. I wasn't expecting that, and It's not something I would usually set expectations for. I'm more concerned with quality of work. Nonetheless, they turned the job out in 3 working days for a low priority pin and weld job. I like that they have opinions, and trust their knowledge. One time, the client ahead of me was discussing modifications to an older model polymer handgun that was not a Glock or a Smith & Wesson. It Was impressive to see the staff member's depth of knowledge, and even the fact that he appreciated a non-main stream piece of art. They're not the closest, but I'm not going anywhere else. It's worth the drive! read more

I had a trigger job done on my GP100 and the results were outstanding. A smooth pull and crisp break without any grit with reduced effort. Great job! read more

All I can say is WOW! I dropped my CZ P09 off to get some work done to it, and I couldn't be happier. Dropped the pistol off stock, came back looking like a Ferrari. Highly recommend. Stoked on the build read more

See all

called and asked if they could install a supplied barrel on a smith 625. the person on the phone did not know what a 625 was so i explained it to him. I asked for the cost and a time line. He left to check and came back stating $1000 plus, then stated the usual wait wa 4-6 weeks. The next day I called 3 times finally I got a call back. I stated I had called the day prior and was going to bring my gun in and I as the job was expensive and complicated could I talk with the gunsmith when I dropped it off. I was told I could not talk with the gunsmith as they had to stay in the shop. This concernled me and I advised him this did not work for me. I located another shop who spent some time answering my question. This is one of those places buyer beware. read more

The guys at Wright Armory saved the day. They helped me to salvage my favorite hunting rifle. They know what they are doing and where to locate scarce and hard to find parts. If they can't find the parts they are able to make them. I don't trust just anyone to work on the firearms that have been handed down through my family. read more

Superlative work, completed on time, and at a reasonable price. I'm a customer for life.

Went in for the Cerakote color of the month on Monday and picked up my parts on Tuesday. I know this isn't normal turn around, which is usually a week or so, but they were doing a ton of that color that day and I got in the lot. Love these guys! They do awesome Cerakote work!! read more

I sent my HK USP in for an iDot install, and had my pistol back in 6 weeks. They did an amazing job! Great customer service! I will be using them again, and recommending them to friends and family! read more

Well, you guys asked me to post up so here it is, So, I brought in my Thompson Center ENCORE to have the scope mounted and bore sighted. The guy's up front was very professional and nice so 5 stars to the front-end guys. the work was completed later that afternoon, and they texted my to let me know it was ready to go. I headed over after work and they brought the gun out to me and the gun was brought out and looked at by the associate, then handed to me to inspect. Well, when I looked at it the vertical line was angled from the left of my trigger to the right of my trigger, about a 1/4 inch off! so I handed it back and asked him to look through it again? he asked the other associate to give it a look and he immediately said yes that's off. So back it went for an adjustment. When it came out the second time they handed it back to me and this time it was about an 1/8" off! so, I handed it back and said I think we are still off. Back again. This time when they returned it was good to go. Made me scratch my head though. I have mounted a couple scopes and I know it's kind of a pain but that was me on my kitchen table. But I expected them to have it dialed. Out to throw some lead down range: I took a friend with who does long range shooting to help me dial it in, the first 2 shots at 50 yards were not on paper so he made an adjustment and got us close, then a couple more and we were cooking with butter. I kind of thought that should have been on the paper at 50 and pretty close from the bore sight. Someone can educate me on that if I'm wrong? We ran out to 100 and then to 200 and I was shooting within 1 MOA at that point. I'm happy with the end result but just the couple hick ups. So, 3 stars to the team in the back for not being more critical of their work before sending it out the door. I get it and do appreciate them asking and I give this info not to bash them but to help them better their service. read more

I sent my gun frame in for coating on the monthly special. I guess I wasn't aware if all the costs, because if I had, I probably wouldn't have sent it in. for example, it didn't occur to me that they would charge $45 dollars to dismantle the frame. I think the whole job was over $200. not really worth it for a Glock. I will think hard before I send another gun in. I did give them 4 stars, because the coating itself was well done. read more

I took my XD to Wright Armory for a complete upgrade. Cerakoting, new front sight, slide milling and milling for an Optic. I had an issue with some of the workmanship and their response was more than I expected and that's saying a lot since I consider myself an expert on how to go above and beyond for a customer. I once owned a very large franchise and for almost 10 years I taught national Franchiees, "Total Customer Satisfaction". Every business has problems but the difference between a great business and a poor one is how you take care of those problems. Every employee I dealt with (Brian, Jeff, and Marcus) were extremely polite and professional. They are extremely busy so be prepared for delays in emails, and phone calls but in today's business environment that's to be expected. I complained to my wife about the long drive to their shop having never used them before but looking back it was one of my better decisions. read more

I can't say enough about the Armory, quality service and quality products. They have such a proactive and informative process in modifying your firearms that you never feel left out in the cold wondering what's going on. I'm a professional Bail-Bondsman for over ten years and I feel well versed as a responsible gun owner. I highly recommend you modify your firearm to fit your needs and aesthetically change the look of your standard out-of-case weapon. Make it distinctly your own, the Armory can help you with that. Why do that you may ask??? In January 2019 I was falsely accused of pointing a gun at a security guard (as if) with my Springfield Armory XDM 40. The "victim" described the gun as an all-black semi-automatic hand gun with a grey handle. WRONG! My XDM was modified by Wright Armory in July 2018 with a Titanium Nitride coating Barrel - Polish" Gold Barrel" victim could not describe the gun because it was NEVER pointed at him. Acquitted of all charges!!!! Thank God, thanks to my attorneys, thanks to the jurors for believing in common sense (I love you guys) and thank you Wright Armory for the good work you do... once I get all my guns back I'll be bringing them all in for custom work. Yes sir, absolutely. Chalk one up for the good guys! read more

Wright Armory - Guess which one is Goldie? - Guns & Ammo Near Me - Mesa, Arizona

See all

I contacted Brian Wright, the owner of Wright Armory to have some work completed on my AR-15. I wanted to get some engraving done in the 3rd selector position on my AR, as I am running a Binary trigger and I wanted the selector clearly marked as being an non-safe position. I was very clear in my request, I wanted the H&K stock 2-round pictogram with the depth/width matching my existing marking on my lower receiver. I sent him pictures of the exact image that I wanted engraved on my weapon. I was told "Not a problem, we can definitely make that happen!" After a few weeks, I drove 200 miles round trip to get the work completed on my weapon at my scheduled appointment time. When I arrived, the sample images that they had made looked no where close to the images I provided them. They keep blaming it on their "subcontracted designer". After about 3 hours, they finally got the exact image I wanted and supplied. Since Brain was not at the shop, I was dealing with a younger man that I hadn't dealt with before. I explained to him that I wanted the width/depth of the engraving to match my existing markings, and I wanted the image aligned with the top of the existing markings for proper placement (proof in photo section of work order). The completed work I got back was absolutely unacceptable. The markings depth, width, and alignment were way off from what I requested. They offered me a full refund for the work (which was given). However, now I have a ruined $300 lower receiver. I have contacted other engraves to see if this receiver could be repaired and was told... "an experienced engraver would have done better, but also would've known what not to promise. The CNC cuts a lot different than a laser so it would be hard to make it 100% identical but yeah that's pretty bad. I'd have gotten you a new one and chalked it up to a hard learned lesson before I handed that back to you." So, in short... Be aware, if you use this company, you may run into the same issue. Now I have a ruined lower receiver and Wright Armory refused to make this right. BEWARE!!!! read more

See all

Wasn't aware of Wright Armory until a friend at work told me about em. Stopped in late on Saturday afternoon with my Remington Rand 1911-A1 for a very simply assembly problem that I should have know how to fix. They treated me like their most important customer! Fixed it in a heartbeat and didn't charge me a dime! I just found a new gunsmith! read more

Took my .380 colt pocket lite and RG 38 in for repair. Extractor on the .380 had fallen down inside the gun. Found out later it was a 5 minute fix to reset it. RG 38 trigger was stuck. Got both guns back dirty and RG 38 wasn't repaired. Charged me $175. Took the RG 38 to Gadsden Gun works. $30 later , gun was repaired. Highly discourage going to Wright Armory. Highly recommend Gadsden Gun works... read more

On my last trip to AZ, I decided to take my dad's old Colt revolver in to get it cleaned up. I called around to some gun shops for advice on who could work on a Colt and finally decided to ask Wright Armory gunsmiths to clean it up. (Healy Firearms on Baseline, my awesome neighborhood gun shop, had recommended Wright for gunsmithing.) Anyway, the Colt had some rust on it from years of neglect and needed a gentle hand as well as someone who knew Colts. Many gunsmiths only work on tactical firearms nowadays but Marcos and the guys at Wright did a great job with the old revolver... and got it to me quicker than normal because I had to fly back home. My dad just sees that old Colt as his 'snake gun' but still, we're all so glad that it's cleaned up and in trustworthy, working condition now. :-) Total cost: $110 for cleaning, lube and rust removal. Sure, that's more than other shops quoted me but the guy at Wright's actually knew how to talk Colts. You should have heard some of the other responses on calls I made... lol. The only thing they didn't do was the 'test shot' I'd requested. That was likely because they rushed the job for me, though, so I didn't mind. I appreciated the quicker turnaround. Tip: Make sure the person who drops off the firearm can also pick it up. If not, they have to do a $20 transfer paperwork. Based on my experience with them this weekend, I'd recommend Wright to others. See ya there! read more

Took them my Ruger Mark 22/45 lite in pieces and they put it back together in about 5 minutes. I spent about 5 hours total trying myself. YouTube and forums were no help and a waste of time. It's an old model so I need to get some work done on it to ease the break down and reassembly. Will be doing all my smithing needs with Wright Armory. Customer service is excellent. read more

I have used this company multiple times for everyting from complete restorations, repairs, coating to deep cleanings. They never disappoint. read more

Wright Armory did a fabulous cerakote job on my Colt Government 1911. This was a commemorative piece that had engraving on both sides of the slide and frame, it had no relevance or sentimental value to me so I had Wright remove every bit of it, you cannot see the slightest trace of this - perfect job. The camouflage cerakote if flawless, all my friends are envious of it. I'll be taking an AK to them very soon. Highly recommend Wright Armory for any of your firearm needs. read more

I bought a RIA 1911 Officer because of the good reviews of it being a solid shooter. First time out was at C2 and the slide had trouble closing. So being at C2, I dropped it off at Wright Armory since they're right there. They took the pistol for a super quick diagnosis while I waited and suspected it to be possible barrel linkage problem. They estimated $80 to fit the linkage. Now, I'm aware that things aren't always as they seem and once you get into a project, other issues may present themselves that weren't known before. So I knew that there was a chance the pistol had other things that may require work. I trusted the guys at Wright Armory to get my pistol running like a top. Other things they found with my pistol included the spring tension was too weak, slide lock needed fitting, and extractor needed tuned and then replaced when the stock extractor wouldn't cooperate. At each step in the process, they texted me to receive approval for the work. At any point if I wanted my pistol back, I could have refused the next step and picked it up. They never continued with work without my approval, which was nice. The guys were friendly and straight forward with issues with my pistol and answered questions I had each step of the way. Very happy with my experience and they work they did. Will be dropping off any gun smithing I need in the future there. read more

Wright Armory - My invoice from Wright Armory. - Guns & Ammo Near Me - Mesa, Arizona

Poor rmr pattern cut. Disappointing. The radius is so off. After having multiple issues with my optic mounting and movement i took it to a pro glock Armour. The lack of posts and poor cut means i wont be able to run an rmr on this slide. The slide is basically ruined... super disappointing. read more

Wright Armory - Poor cut quality - Guns & Ammo Near Me - Mesa, Arizona

See all

This is the third or forth time I have come here. This time I had Wright Armory do a undercut on my Glock Model 43. The gave me a time frame and met the time. The work was excellent too. I have some plans for another pistol here too. Great place very professional. read more

I had a NFA item and a slide laser engraved. Done in 5 days and perfect work. They knew exactly what I needed to do to avoid a BATF enema and were reasonably priced for the work they did. Recommend! read more

Walk-in was welcomed with no issues. Had an opportunity to talk with both guy's working up front and they both had no issues answering any of my questions. Service was done in impeccable time and looked exactly as I expected it too. Will definitely tell all my gun buddies and will be returning for more work on all my guns!! read more

I have taken two different WWII vet-bring-back pistols to Wright Armory over the past couple weeks. Neither gun has been fired since WWII and I wanted to be sure both were ready to take to the range. Wright is over 30 miles from my house but the drive was well worth it. The staff was incredibly helpful - they took time to show me how to field strip the pistol for cleaning purposes - and the efficiency of the operation was apparent when I got a text message telling me the guns were ready to pick up. Their fee was exactly what they had quoted me for each of the pistols. I will be making the drive in the future for some other guns I want looked at. read more