Quick response and performed the service as expected. Need a bike frame welded which many other shops won't do.

Fusion Welding responded my small request very promptly and they came to consult with me in person given their busy schedule. They found the best solution and weld the table at my place. They always looked the best solution and took care of things like their own. I strongly recommend. read more

See all

My upstairs railing's gap between pickets was way to big and Fusion Welding helped me add more pickets to get it to code. The job was done fast and came out great! They had to add more than anticipated, but did it anyways so that the job was done right. They even primed it for me which was really appreciated. It is clear they take pride in their work, and it is great to support a family business. I would definitely recommend Fusion Welding. read more

Fusion Welding - Metal Fabricators Near Me - San Jose, California

See all

I needed a difficult weld for a cable multigym adjustable pulley carriage. Not only did the carriages need to be welded, but bent back into alignment which was very difficult to do. FUSION WELDING took up the challenged and completed this project in record time, far surpassing expectations! They also matched painted the part so it looks like new. Cost was reasonable. They are very personal as well which I always prefer. They are now my "GO TO" for this type of work. read more

Fusion Welding - Carriage Repair w/Paint - Metal Fabricators Near Me - San Jose, California

I had stopped writing reviews a while ago. However, my experience with this company has been extremely frustrating and here I am writing one. We started this project over two months ago, and progress has been virtually nonexistent. During that time, appointments were scheduled and then canceled at the last minute on four separate occasions. After repeated delays, the owner sent someone named Marcos to meet with us. Unfortunately, it has been yet another nightmare dealing with Marcos. I had to miss an important work meeting to meet with him but he came 1.5 hours late. Thereafter, he never followed up as promised. He stated that he would provide an update within three days regarding material sourcing and pricing. It has now been over a week since his visit, and we have received absolutely no communication. Calls, texts, and follow-up inquiries have gone unanswered by both Marcos and the owner, Dave. What makes this particularly disappointing is that Marcos was fully aware of our project deadline, yet our requests for updates have been completely ignored. At this point, I am genuinely questioning whether this business is operating professionally, as the lack of communication and accountability has been unlike anything I have experienced with someone with these many positive reviews. I am honestly surprised by the number of positive reviews given our experience. I am wondering if the business has a new ownership at this point. If you are considering hiring this company, be prepared for repeated cancellations, missed commitments, and little to no communication. Also, the phone number of the business provided here is no longer in service read more

Would give 10 stars of I could! My son got into an accident on his Super 73 e-bike. I called a few welders and Dave was fast to respond. He had great communication and was fair in his price. Drove an hour to drop the bike off and he fixed it within 24 hours. The welding job he did was great - very sturdy and I strong. I trust that my son can safely ride his e-bike again. I highly recommend Fusion Welding. Thank you to Dave (and his son) for a job well done! :) read more

See all

Fusion Welding repaired some sports equipment for us. Our lacrosse rebounder/backboard needed to be welded back together after the main support broke. David responded to my inquiry promptly and completed the project on time for the agreed upon cost. Fusion did a great job, and I highly recommend their welding services. read more

After stripping the crank bolt on my beloved bike, I threw everything at it--self-extracting bolts, a heat gun (thanks to my not-so-brilliant decision to use red Loctite), even a hammer and chisel. Nothing worked. Frustrated and defeated, I reached out to metal working services on Yelp, but no one wanted the job--too small to bother with, I guess. Then came Fusion Welding. No task too small, no project too big! This father-and-son duo saved the day. Dave, armed with his Milwaukee angle grinder, cut through the metal and carbon with incredible precision--no chatter, no frame damage, just pure skill. He even managed the heat buildup mid-cut, all done from their front porch! Didn't have to go into a shop! They took time out of their busy day for what others deemed insignificant, and for that, I'm forever grateful. Thanks, Fusion Welding! read more

See all

Someone bumped into my metal fence and didn't leave a note. I reached out to Fusion Welding and Albert stopped by to provide a quote. He explained what he would need to do and provided an estimate. We agreed on a price and he went to get the needed materials. After a couple of hours, he was done repairing and replacing the damaged portions of my fence. The fence looks amazing again. I hope I won't need to reach out to him in the future for any work, but if for some reason I have a need, I would not hesitate to reach out to him again. read more

Fusion Welding did an excellent job welding my boys' basketball rim! Communication was easy and he had it done the next day. Saved us a lot of time and money. Highly recommend! read more

We had two aluminum patio chairs with hairline cracks in the joints that needed welding repairs. We decided to keep our favorite chairs that we had for many years. I searched for a professional welder and found one with high reviews specializing in fusion welding. Dave was friendly and helpful and offered to do the work. His work was effective and fairly priced. He fixed the chairs and went above and beyond by buying three cans of spray paint to match the color perfectly, and he found the perfect shade for touch-up. Both chairs now look like new when I picked them up. I won't hesitate to reach out to him if I need any welding work. read more

Dave and his son Adam are the best, period. Always responds asap and gets the job done without any hassles, definitely recommend. read more

Steven helped me with my request and was able to get me on the right solution for my needs. Thank you!

I needed 3 metal gates altered. One was a repair, the other 2 gates needed modification. Fusion Welding did careful work and kept me updated on scheduling throughout the process. They went out of their way to do a great job. Highly recommend. Prices are reasonable. read more

I had a titanium exhaust where the hangers were coming off its welds. I made a mistake of taking it to a normal muffler shop and they did a terrible job. Fusion welding did everything they could to help fix my muffler. They're very knowledgeable and passionate about their craft. They took the time to clean off the old welds and was able to get a solid weld onto the exhaust. Skip looking at muffler shops, they don't put as much care and effort as these guys right here. read more

Dave and his son did a very quick turn around for me with some epoxy and welding and did a great job. Price was reasonable. Very happy!

Excellent quality and service. The job was a very small one. Fusion Welding got it done in record time, and the work was perfect! These guys are top notch professionals. read more

Fast, friendly, and good quality at a reasonable price...will definitely be my first stop if I need anything similar in the future.

Dave and his son Adam did a great job welding my patio chair to its base. It was the first time that I used a welding service, so was expecting a mostly charred chair that I would have to fully repaint afterwards. On the contrary, Dave and his son's work was done so well, you could barely see any signs of welding, so I was able to put the chair back in use without any painting. Also, they made sure the chair was not crooked and stood straight and balanced after the welding. Highly recommended! read more

Dave at Fusion Welding did a great job on an aluminum chair that was identified as needing a weld. A couple of gals helping with refugee resettlement had reupholstered 4 chairs and thought their work was done. Another volunteer put his bucket in the chair and said, hmmm. Something is not right. What????? What might have ended up being a 3-chair set, is now fully 4 again! And Dave even touched up the weld on the other side, just to make sure no problem would follow there. His pricing was great, he turned around the job in less than 24 hours, and he was very pleasant, too! Thank you, Fusion Welding in San Jose. You rock! I had marked the chair "Needs Welding." Not anymore. read more

Fusion Welding - Dave at Fusion Welding. Friendly, efficient and well-priced. - Metal Fabricators Near Me - San Jose, California

I was in a bit of a panic when I called at the last minute hoping for some work to fix a large Halloween display. David Stickles was very professional and really came through in a pinch. I strongly recommend him for excellent service and value. read more

Dave is great. Spends time to understand. Asks for pictures and videos. Ensure the work will be possible. We agreed to a time and he came by with the welder. Figured out how to do it it was done in less than two hours. He gave me a price that I then paid. They felt responsible for ensuring there was a coat of paint on the new elements and paid for that out of his pocket. That's what I call going beyond what I paid him, I would hire him again His paint crew came by after a couple of days and did a great job finishing and caulking all the new work. Five stars. read more

I had a small residential welding project that I put it up for quotes here on Yelp. Fusion welding was the only one in my area that said they wanted to do the job. I'm very happy with the welding work that was done. read more

My leather reclining chair' support bracket broke off from the base due to weak welds by the manufacturer, I found Dave on Yelp and he quickly did the repair weld for me in less than 24 hours at a very reasonable cost. The chair is now stronger than ever, he saved me from buying a costly replacement chair. He is truly a professional, highly recommended. read more

Fusion Welding - Metal Fabricators Near Me - San Jose, California

See all

Very quick service I like them a lot quality, personal quick response and very helpful

Had an unusual request, needed perf plate welded to a Medieval helmet's face opening. Fusion Welding was the only business in the area that would take the job, can confirm the weld is still holding up months later. read more

I needed some bad stainless steel welds repaired. Fast service. Worked around my schedule. Very reasonable price for high quality work.

I needed this piece to my arch fixed and David was quick, responsive, and made it look even better than before! Thank you!!! Much appreciated read more

Fusion Welding - Metal Fabricators Near Me - San Jose, California

See all

Remodeling an existing fireplace. I needed to have a double wide metal flat bar (Lintel Bar) cut in half. I didn't have the right tool to do this job and didn't want to purchase one for a one time use. Called Fusion Welding and Dave (owner) responded right away. Provided him with a photo and description of what was needed and by when. Dave gave me a good price and an appointment date. I confirmed. Dave and one of his workers showed up on the confirmed appointment. They did the job perfectly. Extremely happy. Will definitely use them again. read more

Dave was friendly, patient, and helpful while dealing with a layman's pet project. Super-communicative, and he offered useful insights and suggestions that I hadn't considered. To top things off, he treated a minor project with respect and understanding, and then created it exactly as I'd hoped it would be. Probably better, honestly. I recommend Fusion Welding enthusiastically. read more

Needed help with some chronic suspension/frame movement in my 30yo truck. After a brief discussion with Fusion, they knew exactly what I was looking for. They came to my house, and welded the frame right in my driveway! Great service! read more

Fusion Welding - Metal Fabricators Near Me - San Jose, California

See all

This is a 4 month overdue review. I had a metal frame side gate that one of the metal gate hinges was broken. Dave gave a quote through the photos I sent him. When he and his partner came, they investigated and found the fix was harder than they expected and need a new part. Dave explained that to me and I agreed the fix plan makes sense. With the extra work, Dave needed to go buy a part and he only charged the extra part cost and honored his original quote. The metal frame side gate is very heavy that I saw them took efforts and time to get the job properly done. I am very satisfied with their service and I am happy to give them a 5 star review in Yelp. read more

Dave took care of the item I needed to be fixed in a timely manner. Was clear about pricing and was finished within 24 of dropping off the part. read more

I really like there service, they fix my Ford doors. Look the photos and see how good they did the job, very reasonable prices. read more

See all

Great service. Dave and his guy came to me and did all the welds I needed to reinforce the placer for my ramps. They did great service and really came through on a pinch. I would highly recommend these guys. read more

Fusion Welding - Dave's guys welding the reinforcers. - Metal Fabricators Near Me - San Jose, California

Dave is a lifesaver. I broke a beam on an expensive bed frame and I was literally calling welders all over town to have it put back together. As you can see from the pictures, there is a lot of design on the rod so it's not something you can just easily weld together without destroying the looks and feel of it. In the end, Dave was able to propose an economical solution even though he had never worked on anything similar. I picked it up yesterday and I was amazed at how well it was put together. You can hardly see where it was broken. Dave even went through the trouble to paint match so it looks as nearly perfect as possible. You have to see the picture to understand how delicate the work is. A picture is really worth more than a thousand words. Dave is amazing! read more

See all

Dave was great to work with. Needed a quick metal cutting job and he was very responsive and completed the work with very high quality. Thank you! read more

Super quick, reliable and efficient. Dave is very courteous and will love to work with him again. read more

Dave's crew did a terrific job welding a latch to a metal gate frame. Quick and at a good price. read more

Fusion Welding - Metal Fabricators Near Me - San Jose, California

See all

I have an elliptical bike on which one of the step pedal brackets broke. The manufacturer didn't have that part available, so I had to find someone who could fabricate a new one. I took a chance on Dave because his shop is only a couple miles from me. Result: perfect! Dave was courteous, professional, and discussed all options with me. He kept me informed throughout with messages and images, and produced the new bracket within two days. Couldn't be more satisfied nor recommend more highly. Thanks, Dave! - Tim H - San Jose read more

Fusion Welding - Metal Fabricators Near Me - San Jose, California