He's the guy to go to 1000% Awesome work and cool guy to work with. Definitely will recommend him…read moreto anyone I know. Best turnaround time as well.

So my second time here and this guy never sease to amaze me .I broke the weld on my aluminum boat…read more Came here and back on the water in less than 1 hour

I had Pawl create a custom fabricated steel umbrella adapter for me…read more I have a steel tube embedded in my concrete patio which serves as a sleeve, holding up my large shade umbrella. The umbrella needed to be replaced, but none of the new ones would fit in the sleeve. I designed an adapter which would fit over my existing tube and would add an adjacent sleeve for the new umbrella. Pawl fabricated it for me. His work was perfect, with great attention to detail and with great care for the aesthetics. It's a beautiful job, and he's a pleasure to work with. He did it immediately btw, and in record time, and his price was very reasonable.

I am a general contractor and was in a hurry to fabricate a steel support system for a suspended…read morestone peninsula for my client. Paul was courteous, fast and helped me improve my design while doing an excellent job on the metal fabrication. I was also impressed with the metal artwork on display. Clearly they are capable of very sophisticated metal work. I will definitely work with Steel Werx again.

Brian took on the job of replacing a cracked lift off hinge needed for my aging sailboat. It was a…read moresmall job for JP but an important one for me as I was unable to source a replacement for the 35-year-old cast part and it was a critical piece used on the entryway teak doors. JP and Brian came through with a precise stainless replacement part. Cudos to their customer service and attention to detail. You'll not be disappointed when choosing them for exacting work.

These guys do amazing work. We outsource our fabricated…read moreparts to JP metal fabrication because of the quality, price, and quick turnaround.

If you're looking for welding or similar metalwork, your search is over. Go here…read more I recently bought an old steel bike frame with a very poor repair to one of the joints: there was barely any metal holding the joint together, and there was a hole melted in one of the tubes. I was concerned that it'd be hard to get the joint properly repaired, and/or prohibitively expensive. I stopped by Custom Metal Manufacturing around opening time. The workshop is a treasure trove: minibikes, custom signs, and sculptures everywhere. Ed and Gerard were super friendly and great storytellers. Ed looked at the frame, said "I can fix that", and fired up his welding gear right away. Ten minutes of good conversation later the work was done, and at a very reasonable price. The joint is now reinforced with ample steel, and the hole is closed up. Everything I hoped for and more.

I had a small automotive custom project to complete and found Custom Metal here on Yelp. I stopped…read moreby in the morning and met Ed and his son and explained what I needed. Ed was able to knock it out the same day and the custom shift rod came out perfect. I will definitely be back with any future projects!

Stopped by to get a custom metal cube for a special client of mine. Joe, the owner, heard me…read moreasking for it and personally did the job for us on the spot. Outstanding service and help. Thanks!

Thanks for the custom welding on the Ford 9" Rearend. After paint and install of all the components…read moreit looks great.

I needed a 45' long x 37' wide x 9'8" tall steel frame welded up with interior rooms and doors. I…read moreobtained three quotes for the work and was impressed by the details of their proposal. In addition, they offered some corrections to our drawings and some cost savings tips they could implement on our design that would not only save us money but would be more aesthetic and pleasing to the eye. Our client was immensely impressed with the final product when all was completed, ahead of schedule and within their budget. I would highly recommend Brightlight to anyone and am using them for our next project right now.

Hello: I'm a Lady that has been in a Gendron wheel chair for 24 years now due to a hip injury and…read morerheumatoid arthritis. The manufacturing of my wheel chair was discontinued 10 years ago. I had 2 damaged Gendron chairs that I have tried unsuccessfully to find a wheel chair shop to fix them. I finally went onto the internet searching other fixes and found this wonderful company called Bright Light Welding and Manufacturing in Santa Clara, CA. Bright Light Welding and Manufacturing are the nicest, kindest most generous, people I have ever met. I didn't ask them where they were from but they had that "Southern hospitality attitude." Bright Light has the cleanest business offices and manufacturing shop I have seen in years. Rick Wittrock of Bright Light Welding and Manufacturing restored my two chairs to actually better than new. He re-enforced the tubing that had been torn out with steel and the work is beautifully done. You have my gratitude. Rick Wittrock, you are my hero! I would have been elated with a crutch on that side of my chair but His work was immaculate and so professional done. I am so thrilled to have found these lovely people. I would recommend them to EVERYBODY! B. McCulla

I had just bought a used dirt bike for a friend. The heat shield was broken off the pipe. I took a…read morechance and called them.....they were super cool. they said swing in and we will take care of it. They did a great job even painted the welds so it would not rust. I asked how much and they said how about a couple of hamburger lunches.....I handed them $40.00 and was off all in less than a half hour. Use these guys they are great.

After traveling for 8 years and having our truck and camper in every state and almost all of Canada…read moreit broke down in Gilroy California. The left frame rail cracked and broke at the rear shackle and the right frame showed it wasn't far behind. Dustin at Dela's welding came to my rescue! Inspected it in a campsite, gave me a an estimate of costs and scheduled me in for repairs. He straightened the left rail, terminated the cracks, plated and welded the plate to the rail. Right rail he terminated the cracking and welded the crack. Job was done on time and under the estimated cost. Very professional! I would highly recommend Dela's!

Juan and his team were excellent. I came to them with rough drawings for a really small project for…read moremy kitchen (I needed them to create an exact copy of an existing range hood cover with some custom tweaks and some custom gas range trim kit pieces) and they executed my ideas perfectly, pointing out problems with my designs and also willing to help revise and tweak the final product as well. (I had to make a stainless steel version and then swap to aluminium due to the weight) Throughout, Juan was straightforward and honest with me. Definitely would come to him and his team again for any metalwork I need done!

We hired Yes Welding to design and build a fully custom railing for our deck, and the result…read morehonestly exceeded our expectations. This wasn't just a railing, it feels like a piece of modern art. The lines are incredibly clean, the welds are flawless, and the whole structure feels rock solid and beautifully finished. You can tell right away that this is true craftsmanship, not off-the-shelf fabrication. The owner has a real artistic eye and helped us design something totally custom that fits the space perfectly. He paid attention to every little detail and treated the project like it was his own home. Super professional, communicative, and just a genuinely great guy to work with. Quality like this doesn't come cheap, but when you want something done right and built to last, it's 100% worth it. If you want master-level metal work, Yes Welding is the place to go. Highly recommend.