Been working with General Brite Plating for quite sometime. Allan is owner and he's darling and a…read morepleasure to work with.

2 1/2 weeks, 3 emails and 3 phone calls to get a single, and what I think was an insanely high,…read morequote. Could be out of whack, I don't get lots of brass plating quotes.

Frankie and his team are top notch! I had Frankie install two gates at my house, which both came…read moreout amazing. Quality at its finest!..... if anyone is in need in gates, doors or fences- this company is the best. Thanks again Forgeways!

Responded immediately, came the next day and gave estimate. Did the work and completed within 2…read moreweeks. Cleaned after themselves. Good job!

Since my last review of smaller projects/repairs (experience was good), I've brought them more…read morebusiness, thousands dollars' worth of business. Everything is good when they are TAKING your money and business. But, once it goes the opposite way (refund), Roger gets NASTY -- I didn't see this side of him before, always with a smile because while taking money in. I brought some parts to be replicated; 1" shaft with the center with a 2" diameter cylinder with 1" flanged bearings. I was suggested another way to "make" the part that would make everything more "simplified" for me, okay, sure. I wasn't sure what he meant, but after minutes of trying to explain to me, I just went with whatever Roger suggested since he would know better about the mechanics of machine parts, etc., He just told me that I would have to source the bearings myself, which is what I did. He asked me if the diameter could be smaller and I said yes. So I trusted his word and went with it. When I picked up the item, he said, "If it doesn't work out, just bring it back". The thing is, I complained after because what he sold me for almost $400, was NOT SOMETHING HE "MADE". It was a part that could be bought online (~16", 1" shaft with 2 shaft collars), which can be found on Amazon for $35 (shaft) + $10 (2 collars). He then said that he bought it McMasterCarr, then quickly changed his wording to "WE MADE IT". So which is it? (I will never know, but my assumption is he got it at McMasterCarr, as he first stated, or another retailer). Then he said, "I'M NOT HERE TO SAVE YOU MONEY." JUST WOW!! It's my fault for not understanding what he was trying to sell me, but it's obvious my lack of knowledge was taken advantage of--I let Roger do what he does. I believe there is a big difference between MAKING something and up charging for labor, etc., vs. buying $40 dollars worth of parts and CHARGING 9X-10X more!! Especially, to someone (me) whom he kept calling "friend" after all the visits/business I gave him. When he did this "work", I also dropped off a small part that had a broken screw stuck in it. He said it was FREE OF CHARGE to extract it. Anyway, when he agreed to refund me for the $400 (16" piece of 1" shaft), BUT he charged me $85 for the screw extraction that he told me that was free! From ~$400 refund, I received $85 less. This costs him nothing (almost literally) to fix easily. $85 FOR A SCREW EXTRACTION--HIGHWAY ROBBERY!!!! He gave it back to me, with a new screw, "I also gave you a screw". (Oh, gee, Thanks, I guess.)--But I didn't need that screw as I have 100's (if not 1000's) of these screws for my parts -- so he acted like giving me this screw in place of the broken one is a huge hook up, after I spent thousands and thousands of dollars here. I paid for this with my personal credit card, but he made out the refund check to the company I work for. So I asked him if he could cut the check out in my name since I'm the one who paid for it. He said, "just give it to your company and have them pay you." I explained to him that I can't do that because of accounting issues, etc. He got mad and he snatched the check out of my hand with an attitude. This right was the last straw. I was still going to give him more business (which I even told him, thanks for the refund and making this right, I'll be back). He told me, "I DONT CARE ABOUT MAKING THINGS RIGHT AND WHAT YOU THINK, I DONT NEED TO RESTORE FAITH IN YOU OR YOUR COMPANY". Okay, fine. ^Great attitude, perfect way to lose business after the fact that I stated that I hope this one issue won't affect future business and that I would be bringing more business. Roger shouldn't be interacting with customers on the front line if that's his attitude and represents your company. On the other hand, Alex is very polite. While Roger was deflecting the situation, blaming it on me, arguing who said what, this and that. Alex is the one who apologized on behalf of C&H Metal with a smile on his face, while Roger was steaming mad at the situation -- just the way he snatched the check out of my hand says it all. ALEX IS THE REAL MVP at C&H Metal, too bad he's not at top management, because management up top is clearly lacking customer service skills and lacking know-how to keep the customer acquisition costs low. I can bet they'll see this review and Google what CAC is because they don't know. Or maybe, they are making so much money, they don't care how they lose a few customers the way they do. Roger (mgmt) just knows how to take money with a smile on their face until you complain about something, then it gets nasty. This is the type of business you don't want to give business to. If you do give business to them, good luck. Hopefully, it's a short stint because eventually an issue will arise, and Roger has a short fuse, and you may not like the way he handles it. This experience was a blessing in disguise because I found a better and CHEAPER shop to do work for me.

From start to finish, their communication and service were top notch. I've been trying to find…read moresomeone to help with a fabrication for a kitchen hood vent, and finally, found the right company to do it! I would strongly recommend using C & H for your any of your fabrication needs. Great job!

Our carpenter Paul asked us to stop by this place to pick out some moulding and mantel designs and…read morewe are so glad that we did because there are just so many to choose from. If you are lost and have clue on where to start, take a moment to ask the owner some questions. He is not only knowledgeable but is super passionate about wood. Give him some ideas on what you like and he will take out the base and crown and all that good stuff out for you to see. He will also give you samples to take back if you simply can't make up your mind. Small mom and pop store. Only drawback is that the place closes at 2pm on Saturdays so try and come early so you have ample time to look around. Check in and get 15% off on your order.

Keiron always get the job done. If he doesn't have it. He'll find it. Great guy. Amazing service…read more Fair prices. The man has a passion for what he does. I love getting my moulding from here and supporting small local business.

I was looking for a wide piece of wood in an odd size for use as a small countertop. I called all…read morethe other lumber places in the area and nobody could help me out. Vincent, on the other hand, found a very nice plank of white oak and suggested that he could make the piece himself. It turned out great and for a very reasonable price.

Vincent was so amazing! Very skilled craftsmen. Excellent workmanship. He helped me with my silly…read morelittle project which was way beneath skill set. It is worth the time to check out his larger projects for inspiration and fun.

Robert took care of small car project for me. The pieces cut were perfect with accurate…read moremeasurements. Will be coming back with more projects. I recommend this business.

Bob was a super friendly person to work with. His son Robert runs the business currently but…read moreRobert is out due to Covid temporarily. Pricing, speed of service, and quality are 5 stars. Tommy, the metal worker who worked on my original catalytic converter connector designs so that I can easily install and remove my Ford F250 catalytic converter, was a very nice person to work with. Check out the photo of that. Cool trivia : George, Bob's father worked on the original designs for the Air Curtain, inventing it in 1960, at least their original Air Curtain, and that is an important income for the business in 2022. Thank you guys for the affordable, high value service.

I recently had a pleasure working with H Ironworks To fabricate custom side yard gate and really…read morehappy with their work! The craftsmanship is so superb and I definitely got very personal attention to detail on every step of process. Them not having hundreds of reviews made me bit nervous but Kevin and his team's initial detail oriented proposal made me taking a leap of faith and I'm so glad I did! Kevin Sr. Is a true artist and Kevin's handling on thorough process from the initial design to installation is top notch and I'm not very easily pleased person when it comes to construction related projects!

I don't write a lot of reviews, but Kevin and his father, Hamlet, at H Ironworks definitely deserve…read moreone. I called H Ironworks and spoke with Kevin about fabricating a custom steel cable tension brace to support a shade sail spanning about 35 feet. He and his father came out to my house, listened to what I was trying to accomplish, took measurements, and then went back to the shop to figure out the best way to build it. About a week later they returned for a test fit, and everything lined up perfectly. The following week they brought it back powder coated, and I couldn't have been happier. The workmanship was outstanding--beautiful finish, clean welds, and it looked like it had always belonged there. Just as important, Kevin and Hamlet are genuinely nice people. They're easy to work with, communicate well, show up when they say they will, and clearly take pride in what they do. I would recommend H Ironworks without a second thought. Five stars all the way. Thank again guys! Jesse

I hired to repair and adjust a gate on my wrought iron fence, and the experience was excellent. He…read morewas very prompt, showed up when he said he would, and got right to work. The gate was adjusted perfectly and now opens and closes smoothly. He was professional, clean, and left the area exactly as he found it. I'd definitely recommend his services to anyone needing welding work done at their home.

I needed our daughters bike to be fixed with a small weld that broke. Alen came early in the…read moremorning and had it fixed so fast. He was the nicest guy. I highly recommend. Our family thanks you!