I can't imagine anyone saying anything negative about Russ and Eric at Steve's Machine. I had them do a VW 2332cc engine for my desert car. The way it knocked and with little to no oil pressure, I figured it was junk. Russ took it apart and assed the damage. In his opinion it wasn't nearly as bad as I expected, and I was ready for the worst. He installed a new crank, fit new main and rod bearings with new rings and a valve grind. I had a practically new motor at less than half the price of a new. Three years of abuse later, it's still running strong and doesn't leak a drop. That gave me the confidence to have them build a Pontiac 462ci for my 67 GTO/Le Mans. At his shop, Russ sat down with me over a cup of coffee and gave me his full attention. We discussed my new build, and he gave me his opinion about some of my choices with really good reasoning. Some of his ideas gave me more performance at little to no extra cost. He saved me money on unnecessary over building, while also advising on weak areas. During the build he showed me on my engine, extra things he does on all motors. Shimming lifters, spec'ing ARP bolts, dialing the valve train, and milling the intake manifold to name a few. He doesn't cut corners; I don't think his conscious would let him. Once it was done, they broke it in on their shop dyno. They optimized the timing and fuel curve. It made 419hp @ 4800 rpm and 513 ft/lbs. torque @ 4000 rpm. It's ready to rumble. I go out of my way to recommended them, every chance I get. And for what I got, the pricing was more than fair and reasonable. Nothing but a positive experience. Also, sometimes if you want the best, you have to get in line and wait. That's life! read more

See all

Came here and got my head fully rebuilt, they ended up cracking my head and didn't say a thing returned the head without doing a pressure test, countless time and money spent on this build from oem fluids to oem gaskets and purchased a new block thinking my block was bad because I trusted their work on the head and the head ended up being cracked they did not reimburse me or try to fix anything with me they said they will fix it and call it even horrible customer service read more

I emailed a picture into Russ, he emailed back quickly and stated the rough time it would take and price. I took it down at 10am and got a phone call - few hours later to say it had been completed and was ready for pickup. The finish is excellent and it cost me only $40 odd. Excellent job and service... I'll be using Steve's from now on. read more

Steve's Machine Shop - 4 hours later... Russ and the guys at Steve's did an excellent job on this one. Diamond-tipped finish. - Auto Repair Near Me - Azusa, California

See all

Some people want to gouge you. Some wonder why local businesses can't stay alive. They can't even compete! I've attached a copy of an estimate they offered me for a rebuild LQ4. I also included the asking prop ice from Autozone who they themselves are thieves! They typically charge 300% more for the exact same items from Amazon, and mind you, with delivery! I'll let you make your own opinion. I asked if they would offer me the same warranty, Steve's Machine Shop went silent! read more

Steve's Machine Shop - Autozone w 4 yr unlimited mileage no fault warranty - Auto Repair Near Me - Azusa, California

See all

Since Russ took over a lot has changed from when Steve was milling VW heads. I would not be able to comment on quality or value because they were "booked" from spring through fall. And they now only communicate through an email reply that states "Sorry we're booked solid." It's disappointing because they used to be my go to shop. Even purchased one of Russ's pre-made B20 bottom ends. Oh well I guess it is the end of an Era. read more

I was having intake valve issues and they did an amazing job on rebuild this head with upgraded valves , retainers and lifters , when I got there to pick up the head they showed me all the process and how everything was operating how it should even by showing me the valve and shims gap which blew my mind that they did that & I 100% recommend this machine shop service A1 ! , my Instagram is that_facked_miata if u guys want to see this head under 30psi and at 9k rpm thanks for u guys again definitely coming back for my other cars ! read more

See all

I built this engine myself but I wanted to thank Russ at Steve machine shop for doing all the machine work. Thank you again Russ for all the project you have helped me accomplish. read more

Steve's Machine Shop - Engine - Auto Repair Near Me - Azusa, California

See all

They provide very great customer service. Love their work and will always keep coming back. Definitely recommend coming here.

Russ did an amazing job on my Audi S4 4.2L engine - when I first picked up this project, the block had been left in someone's back yard for almost two years out in the rain, sun, even tree sap and pollen stuck on it! Once Russ was done with it, it looked brand new! Steve's Machine shop is a multi-generation family run business. You can expect to get excellent service and see friendly, helpful people. My project was not straightforward at all but Russ was happy to work with me to solve every challenge along the way. read more

See all

Russ at steves is the man to go to. Russ has built multiple engines for me ranging from stock rebuilds to high performance small blocks. He is extremely knowledgeable with what needs to be done for a proper setup and never once have I been oversold or has he tried to upsell me on something that was not necessary. His pricing is the best that I have seen and he is great with communication and keeping me in the loop through the build process. Russ has never left me hanging and is always there to answer my questions and gets his jobs done quickly. Highly suggest russ and steves machine shop. read more

Steve's Machine Shop - Auto Repair Near Me - Azusa, California

I am going to update my review to a 5 because I appreciate Russell's response. I would honestly go back if I knew that Scott was no longer involved.... he was the problem with the place. Thank you Russell! read more

Dropped of my flywheel to get it resurfaced , was told to be ready the next day. So next day came and my flywheel was still there untouched, I was a little upset but Steve make sure it get done ASAP , so waited outside for a bit and the finishing work is 4/5 good price and good works man shop . Other than that it's my to go shop if I need any machining Work to be done . Really happy with the result of the product. read more

Steve's Machine Shop - Auto Repair Near Me - Azusa, California

See all

I had Steve's do the machine work on a Lotus Twincam engine. They did an outstanding job! This is one of those rare places where they take a great deal of pride in their work and make sure everything is perfect. Russ and his guys have modern equipment and an old, and proper, work ethic. A pleasure to do business with them. read more

Steve's Machine Shop - Steve's machined the new block, valve job, and balanced everything. - Auto Repair Near Me - Azusa, California

This place is awesome. Russ and his guys do amazing work. Being that this is my first performance engine build, I wanted to find a top-notch machine shop. This is definitely the place. They recently built my VR6 bottom end for my turbo build and I couldn't be any happier. Russ was always there to answer any of my questions by phone and email. I really appreciated the honesty and customer service. Thanks fellas! Now I just need to save up some money for the cylinder head work! I'll be back soon! read more

Steve's Machine Shop - Auto Repair Near Me - Azusa, California

See all

Brought my E36 M3 head in to get it repaired and had a status report by the end of next day. Steve told me my head was cracked and would need to be welded. I was a bit bummed, but they assured me the welding shop was one of the best. Eric reported back to me and said the weld was successful but the head started to open up after another pressure test. They just charged me for the pressure test and not the weld. Steve and Eric were really helpful and honest. They could've thrown everything back together and polished it to make it look nice and collected a nice sum from me, but they didn't! I ended up purchasing a newer performance head and told them I'd go back to them for any other machining I need done. read more

They have awesome service and pure and simple they balanced my flywheel and my pressure plate ... read more

Steve's Machine Shop - Auto Repair Near Me - Azusa, California

Hey Russ, Can't wait to show you the finished product, good work man - worth the wait!!!! I actually need to some of the Oil drain caps as well as the oil supply cap - having a hell of a time finding them online & don't want to break the motor in with the turbo's pushing massive PSI. Decided to go with the twin charge setup so going to break it in with the supercharger. Can you reach out to me - use my cell # on file as I don't use facebook any longer. Happy customer - Thanks!!! read more

Steve's Machine Shop - When Russell finished.... - Auto Repair Near Me - Azusa, California

See all

I have no words to say of how happy and thankful i am after having my engine fully rebuild by them.The guys out there know exactly what you are looking for; They treat you with respect and honesty i highly recommend them Russel, Erick,Scott and Steve best persons, ever thank you guys. read more

Steve's Machine Shop - Auto Repair Near Me - Azusa, California

Need Advice, Ask Steve. Need parts, ask Steve. Need a mechanic who can truly get you VW running right, see Steve. Been going there for over 10 years, through 2 Bugs, one of which I still have & drive daily. read more

My Son and I decided to restore a boat that had been parked for 20 years we were in a time crunch and needed our heads redone Steve said he could get it done in the time allotted. And he was true to his word and had a quick turnaround and the price was reasonable thank you. read more

I went in and told Steve the problem I was having with my dune buggy and asked how much it would cost for them to take a look at it. He told me they don't do estimates, so that I can fix it at home or take it somewhere else. I said I understand that, but I'm not asking you to look at it for free, I just want to know how much it would cost me for you to take a look at it before doing any work so that I know if I can afford it. He said they don't do estimates, go somewhere else and walked away. Apparently I'm suppose to give them my car and pay whatever they say it costed once they fixed it. read more

Steve's Import Auto Center FTW. I have been taking my Honda engines to this place for over a decade. It is family owned and operated which makes it even better. need a valve job, cylinder head resurfaced, a block bored honed or decked then Steve's is your place to go! Quick turn around's the latest machining equipment and very helpful people. this is San Gabriel Valleys Premier Machine Shop and it don't get any better..Most of the Local Dealership's (Honda, Cadillac, Ford, Volvo, Nissan) take all their Machining needs to Steve's why wouldn't you? read more

I've been taking my 92 Nissan pickup to Steve's import for years. Happy with the service. Actually had Steve's guys put in a new engine for me. Very happy with the work and price. I especially appreciate his honesty. If Steve says it needs a tuneup. You need a tuneup. read more

Great bunch of guys and very knowledgeable, lots of experience in one place. Highly recommended

Steve's is the greatest. I'm 44 now and back in the 80s this place was the top notch owner operated VW machine shop. You would always see the coolest modified VW, and still do, vehicles in there. Now days they do everything. They are great with the ricers and the Chevy small block and BB engines. Going back to stock they can help. Simple they can help. Need bit machining work done they can do. Need a modified small block fully decked out they can do that too. Russ is my go to lately because I've been helping the kids and their 4 banger projects but my 68 camaro engine is going in for complete restoration and maybe a little internal work to give it a bit more ;). They are Father and Son's operated now so each son has his specialty. Bit if you need great quality machining done these are the people for sure. Thanks Russ and Family for al your hard work and keeping the good old American high quality machining tradition alive. read more

These guys are amazing! I had a rough idle for a month before i finally decided to get it fixed whether i could afford it or not. I had customer at my job recommend Steve's which i had never heard of. But i figured they couldn't be worse than the last place i went...Young's I made an appointment and dropped the car off. I called them each day and they answered my questions and gave me status reports. After 2 days they said they still hadn't completely fixed the problem. They fixed a vacuum leak and a few other issues but told me if i didn't want to wait one more day they would let me take the car for FREE. i left the car and the next day they found and fixed the problem and had it ready before i had to go to work. These guys are amazing, very friendly and personable, but most importantly do great work. I'll be going back for any future issues guaranteed! read more

This is THEE place to go for any kind of engine work. From a simple rebuild to a high performance monster build, Russ and Eric know what they are doing. The best part is that all so friendly and are always willing to give some advice and share their knowledge. The nice thing is that they don't try to up-sell you on things that aren't needed for your specific build. I thought I needed some parts but they said that for my build those parts were not needed. They could have easily sold me on expensive pistons but steered me in a more cost effective route and also explained to me why what I was thinking I needed was not actually needed. I won't hesitate to come back with more business in the future. They made the scary need of an engine rebuild easy and cleared up many misconceptions for me. They made the whole process so much more enjoyable and it was all thanks to their friendly and professional manner and all their knowledge. Thanks guys. read more

These guys are great! I had dealt with them about 20 years ago, and the head I had them do worked flawlessly. I just recently had them do the machine work for my Jeep's 4.7 V8. Russ was a pleasure to do business with. He was extremely thorough, informative, helpful, and friendly. Prices were very fair, and quality is great! My crank had to be replaced, and the core that he got for me is absolutely perfect (.002 on mains and rod journals)! I highly recommend Steve's Machine Shop!! read more

I love these guys! I really needed a job done in a short period of time and Russ and Eric came through for me. I have used them in the past with excellent results. It's refreshing to have a team of players that are genuinely concerned about your needs. Bravo guys! read more

Great place to get your Vw machine shop needs. Balancing, porting, case clearance the works. Fast and honest service. Family owned. I only take my parts here. They also do import stuff as well. Would recommend this place over all the others in the area. read more

Steve was very rude. I would not reccomend this shop to anyone who wants to have a helpful and decent experience with your automotive needs.

AMAZING. This is the only place I would ever take my BMW. I've shopped around and took my car to about 3 other places and was quoted about 3 times more than what Steve's quoted me. I've taken my car to other places in the past only to have to return with the same problem or sometimes even more problems. This has never happened with Steve's. Ed, the mechanic, is a miracle worker. He knows his stuff! I've told him what other auto shops had said the issue was and how much they quoted me, and he'd laugh and tell me what was really wrong and quote me something way less. Super friendly and super trustworthy. Highly recommended! read more