We couldn't be happier with our new porch--what a transformation! Iron Castle Construction's skill…read moreand professionalism are as impressive as the outcome itself. Owner Ken Schubert worked creatively with us and our design, streamlining materials and construction methods to capture the look we wanted at a price we felt good about. He took extra care in construction, picture-framing the decking, a detail I wish I'd thought to ask for and was overjoyed that he included. From inspiration photo to finished product, Iron Castle turned our lackluster, sagging brick porch into a wide, welcoming, beautiful entry. We're excited to tackle future projects together and recommend Iron Castle to everyone we know.

We had a fairly simple repair for our vinyl siding today. Ken was very responsive online and…read moreshowed up when he said he would. Ken was professional and personable and repaired our siding in a timely fashion. And by the way, he was very affordable compared to a few others who replied. We will definitely use Ken again.

I hired Larry from M&M Quality Construction to renovate my units and make them rent-ready. I was…read morefully transparent from the start that I do not live in Cleveland and asked directly whether I could trust him to handle the work responsibly. He assured me I could. Unfortunately, he did not fulfill what we agreed on. I paid over $12,000, and the work was left incomplete. The units were not rent-ready, debris and trash were left throughout the property, and key items we discussed were never finished. The photos I attached show only part of the condition he left the property in. After receiving payment, Larry stopped responding and ultimately blocked me instead of taking accountability or addressing the issues. As a property owner who relied on clear communication and trust, this was extremely disappointing and costly. Based on my experience, I would strongly recommend hiring someone else if you are considering renovating a property. This contractor was unreliable, unresponsive, and did not deliver the agreed-upon work.

Showed up early/on time was polite. Job completed promptly and as promised with a high level of…read morecleanliness and the job was done well. Thank you Larry and team.

Nexus Glass Scapes does fantastic work. I reached out on Yelp for help with a tile project I was…read moredoing in my kitchen and they responded quickly and got me setup with a project date within a week or so They did the entire wall above my kitchen sink to the ceiling in blue tile and it looks wonderful. The work turned out even better than I could have imagined. Thanks again! Would highly recommend them for any tile work you have.

Chris and his wife did a beautiful job installing a shower door. It really opened up the space…read more Great communication and professionalism. Highly recommend.

My wife and I ordered 11 stair treads and 3 landing risers from this company. The turnaround was…read morepretty good as we submitted the order 1/28/25 and received it 2/13/25. Immediately on receiving the order we opened it and were really disappointed to see the 11 treads we ordered were all the wrong material. The 3 landing treads are awesome but the 11 treads were not right. Then we realized if we flip them over, the underside of the treads is correct. However, the issue is that the treads we got are clearly not a full bullnose. There is a square edge profile on one side of these treads. Clearly there is a top vs. bottom with the bottom being the square edge profile. However, the live sawn side of the boards has the square edge profile which is meant to be the bottom -- the square edge facing up is now how stairs should be. It seems someone in the millwork shop accidentally put these through the router table upside down using something like a 7/8" router bit? The other thing I think that happened is they did put a full bull nose but then someone put the treads through a planer which resulted in the square edge on the finished side. Either way, these are defective treads. I took the time to make a video to explain this and sent it to the customer service email but I don't really feel like they watched it. They claimed all of their treads use a full bull nose but as you can see on these attached photos (my wife and I traced the nose) the treads have a square edge profile on the top of the tread. This isn't a simple fix like sanding down the square profile -- that just will not work. Also, they can't be re-routed without the depth being reduced to closer to 10" which also won't work. We ordered 10.5" deep treads. We just want to get what we paid for. The only way to fix this problem is to remake the treads correctly with a full bull nose or with this nose profile facing rounded side up. I sent additional photos over to customer service and I'm hoping that they'll do the right thing and send us a replacement order on Monday. If the company stands behind its warranty around defective products (these treads are defective) and sends us a new order on Monday, I'll consider this a 5-star company and update this review accordingly. However, based on seeing these surprisingly bad Yelp reviews I don't have much confidence and if they choose to not address this issue I'll issue a chargeback with American Express.

I was so nervous because of the bad reviews but I am very happy with the results so I had to weigh…read morein for these folks. The online ordering worked great and I was able to submit a diagram of how I wanted it cut. Some sides needed a straight cut, others bullnose and the sink was off-center so we needed to be on the same page before they started cutting. They contacted me right away to confirm the diagram details and after a few emails back and forth they started work. I was comfortable with the process and confident it would come out well after working with them. I went for the CNC cut of the sink and polly satin finish. It came out great! From the day I ordered it took about a month but now has saved me a lot of prep work and time. The sink is ready to be mounted. The packing was a pallet so it was very well protected. they also gave me the cutout so I have a project with my daughter to make a cutting board with it. Attached is a pic of the counter right out of the package in place for a dry fit in the new kitchenette. Perfect! Ty

Twice now they didn't show up to give us an estimate when they told us they would be here…read more There are plenty of other contractors to choose from

I do not recommend this company. The person I talked to seemed to be unprofessional and…read moreunreliable. I made an appointment with him to assess my foundation issues and he never showed up. He reschedules our appointment time an hour before he was due to arrive via text message. He never showed for the rescheduled time, nor did he call. He doesn't even deserve 1 star.

Absolutely terrible business! DO NOT WASTE YOUR TIME WITH THIS TRAIN WRECK…read more Zero clue what they are doing. Her staff are incompetent, leave the place a total mess with cigarette butts and beer bottles scattered all throughout the property. Left everything for my team to clean up. Not to mention the owner is probably one of the most disrespectful and inappropriate people I have ever dealt with. She'd have more than one star if she treated people with any shred of decency.

MCR was incredible. Had storm damage in the spring. Beverly was absolutely the best to work with:…read moreknowledgeable, kind, easy to deal with. Would highly recommend. We have a beautiful new metal roof, new gutters and a repaired garage roof. They are the best!