Went in today for a simple errand, to replace my Ford F-150 battery and other worn parts, but left…read morewith respect for the lady behind the counter who seriously knew her stuff and helped me avoid a few mistakes with my parts selections. I'll be honest, a NAPA store layout is a nightmare for someone like me who can't handle clutter. Further amplified my good experience by having someone smart and interesting to talk to even for a few minutes to track down what I needed. Refreshing and I always get what I need from our local NAPA. Thank you!

The people behind the counter is this store are behind qualified for the job, if they don't know…read morehow to help you they will find someone who can!

I took my Jeep Wrangler into Aaron's Olympic 4x4 in Snohomish. Being unable to trouble shot…read moremultiple codes on this Jeep, I thought I'd give them a try. They spent some time on my jeep trouble shooting it. Unfortunately they weren't able to pin-point the issues that were causing the codes, they believe their all electrical problems. However they did refer to to another shop that might be able to help. I showed up to pickup my Jeep and I was very surprised that they decided not to charge me for their trouble-shooting time. WOW, this is just unheard of. This is the most honest and friendly shop that I've ever been too. Thank you for a great experience.

I highly recommend taking your Jeep/Truck/SUV over to these guys (Collin, Shane ) they know how…read moreget it done without over charging or upselling their customers. I just got my front drive shaft (tom woods) replaced and a tune up there and the service was excellent.

Great service and price. Friendly staff. I've been taking my car here for oil changes.read more

Paul's service was amazing! Called Thursday and was able to see me Monday day. From start to finish…read morehe was realistic on expectations/price/timing, knowledgeable and kind. When I complimented his customer service, he said "I just really like building relationship with people." 10/10 have already sent his info to a friend.

Most of the Co-Op's I hand around at these days are food Co-Op's so going to a farm one reminded me…read moreof going to these when my parents would go to them for their ranch supplies sometimes. The main idea was to kill a bit of time and the hope of maybe seeing some baby chicks even though they are often in these stores on a seasonal basis. Well indeed we did get to see the baby chicks. Many were older at this point and had their own feathers but there were younger furry ones too. The older ones yellow fur was gone but they were still very cute. All different kinds of different chickens here also so quite a nice variety of types. Don't handle them on your own as the signs indicate as a staff member needs to be reached before going further with that. There are lots of other inventory for your agricultural needs and in my mind would be a great place to go to stock up on supplies.

I love the Co-Op. Somehow, they always have everything I need despite SEEMING tiny. Last year, I…read morebought some turkeys and ducks for the first time - which means I go to the Co-Op pretty regularly - food, oyster shell, straw, bug treats, etc... I love that they're ALWAYS WILLING TO HELP. Last year, I wanted a specific kind of duck and they helped me get an appointment for the specific time when they were coming in. Same for the turkeys - they worked with me via email to set up the appointment. It was beyond everything I expected, especially considering COVID craziness. If they're ever out of something at this location, they'll check if they have it at the Monroe location (a quick, 7-8 min drive). Again - always ready and willing to help you out. A big draw is that they have no-ethanol fuel - the preferred fuel for small engines (lawnmowers, weed-whackers... etc.) and you can fill up propane here. So, it can get pretty busy. Completely unrelated to ducks and turkeys, I recently built a gym in my garage - due to COVID - and Tractor Supply was the premier supplier of 3/4 inch horse stall mats - the preferred DIY gym flooring solution. These mats are ALWAYS OUT OF STOCK... and people camp out on the page checking for stock and are driving 100's miles to get them. It's nuts. However, Snohomish Co-Op recently got a bunch in stock. I don't know if this is something they usually have, but I appreciated them getting them in! It's just such a useful place, and I really appreciate it!

Big ripoff! I dropped off two heads to have resurfaced and pressure tested. They had them for a…read moreweek and never contacted me. When I called he says his milling machine is broken and he can take them to his buddy's to do them. I say let's get them done. Another week later they are finally ready. He charges me $335. This is a $150 to $200 job at any other shop. When I questions the bill he says they charge hourly. I think all he did was take them to another shop and double charge me. I will never step foot in that place again and bad mouth them any time I get the chance.

I brought a 4g63 cylinder head in here for a standard cleaning one would expect from any machine…read moreshop. I dropped it off Friday, was quoted $40 and told it would be ready in a couple of days. Monday i get a call saying it's ready. Tuesday i pick up. They want $65 plus tax. I scoff stating i was quoted $40. I get a response something along the lines of "Well it's $65, so unless you want to leave it here...". The gasket surfaces weren't clean. There was still a bit of grease embedded in the casting. I asked why it wasn't very clean, and they said "Well you can't put it in the hot tank." (No sh!t, A{}hole, it's caustic to aluminum, this isn't my first rodeo, i used to work in a machine shop). Apparently they don't even have a jet/steam cabinet and they WASHED IT IN THE SOLVENT TANK, or so they said. I got it home, cleaned up the mating surfaces, blew it out with the compressor and found glass bead (sand) all throughout the lifter bores and oil galleys. They didn't bead blast it, nor did I ask them to. It should not have had ANYTHING in it and should have been in a bag. Not sitting out on a stool in the open like it was when i went to pick up. The men that work here are not men at all. They are scoundrels that should not be trusted. They do shoddy work. Check google, they have many awful reviews. I hope the business goes under soon, because it's a waste of space. This experience with Jim Green's was more of a barometer to see what kind of work they do, as i do a lot of work on mitsubishi performance vehicles for myself and others. They'll not ever see my face in their shop again, let alone a penny from my coffers. I actually contemplated taking this particular head to the car wash and blasting it off because it wasn't even all that filthy. Customer lost a timing belt and some exhaust valves got bent. No cracked guides, and everything else checks out, so I just wanted to be working with clean parts, not throwing it together with grime and grit all getting in the way. I should have taken it to the car wash. I would have saved about $60 and whole lot of frustration. DO NOT DEAL WITH THESE CLOWNS FOR ANY REASON WHATSOEVER!!

Andre at O'Reilly's auto parts store in Mill Creek is THE BEST!!! This wonderful young man is…read moreSMART, FAST, knows how to give good customer service but is a Mechanical Whiz!!! The dude deserves a promotion! Smoother than a fresh jar of Skippy!!! Took care of this old granny 79-year-old woman took that rear parts apart put my tail light in on a Ford focus 2010 totally ridiculously hard job to do? Crazy design By Ford but Andre smoked it!!!!!

Bought windshield wiper jug and they came out to my car and filled it up for me. He was cheerful…read moreand kind.