If you're looking for welding or similar metalwork, your search is over. Go here…read more I recently bought an old steel bike frame with a very poor repair to one of the joints: there was barely any metal holding the joint together, and there was a hole melted in one of the tubes. I was concerned that it'd be hard to get the joint properly repaired, and/or prohibitively expensive. I stopped by Custom Metal Manufacturing around opening time. The workshop is a treasure trove: minibikes, custom signs, and sculptures everywhere. Ed and Gerard were super friendly and great storytellers. Ed looked at the frame, said "I can fix that", and fired up his welding gear right away. Ten minutes of good conversation later the work was done, and at a very reasonable price. The joint is now reinforced with ample steel, and the hole is closed up. Everything I hoped for and more.

A shoutout to CMM. I decided to drive over with an item that needed welding. They were able to…read morecomplete the job right away. Friendly service at a competitive price (another company was 4x more expensive and said it would take a few days). If you need some welding, call or visit them. You will not be disappointed.

We hired Joey to build a railing and hand rail for our remodel. We needed to replace old wooden…read morerailings that were removed as part of the remodel. Great experience all around. He came to us with samples of all his railings. Being able to see the finished product helped us decide what style we wanted. We ended up changing our mind after seeing the samples, so this was really helpful to us. Later on, he came out to measure multiple times--before and after the floors were down--to make sure everything was perfect. He matched the wood to our floor in to help create a seamless look. He was super careful when he installed them not to damage any of the new construction. Everything came out perfectly. The glass railings look beautiful and well worth the investment. I would highly recommend Joey.

Beautiful stair rails of metal, wood and glass. Joey and his crew are passionate about their work…read moreand did all of the installation themselves which took 3 days -metal, wood and glass. They kept our house clean by protecting the floors with cloths and covered the wall with paper. Overall a great job and we are very happy with our rails.

They made an incredible railing for us. To code, on time and within the agreed price range. The…read morepicture says it all.

I highly recommend Starco! Tom came over and made suggestions and after careful examination of my…read morelikes and dislikes, designed, made and installed my rails and beautiful front gate! Quality and professionalism they do exude!

5 Stars for the wonderful team at FL Ironworks. I understand there is a lot of work out there, and…read moreafter calling several metal fabricators/ironworks shops without a return call, the team at FL Ironworks quickly returned my call. The design team led by Javier knew what I wanted, made suggestions and executed. I can't say enough kind words about him and Arama at their offices. Thank You so much for my beautiful iron rail!

They did my backyard fence that faces a pond. Beautiful work! It's been almost 3 years and the…read morefence hasn't had any problems. Increased property value!

I requested a quote for a crawl space cover. Lee called me while on vacation to check on the…read moredetails. Even came over to confirm measurements and walk through the details. Cover was done in 3 days.

These guys were truly amazing. The quote came in well below everyone else, and they were able to…read morefabricate a great looking gate and install in about a week. Exceeded my expectations.

Excellent team. Responded quickly, showed up on time and completed a welding project efficiently…read moreand with high quality.

They responded quickly when I called and texted…read more Communication was a small issue. There was a misunderstanding but they were very gracious about it.

Eddie at ECA Iron Works is a 20 out of 10. He replaced two 30 foot wood pergolas that were rotting…read morebadly after 20 years. Eddie's pergolas will probably last forever. They are power coated green and have the exact measurements and detail as the previous wood ones. See picture. You cann't tell they are metal. His pricing is great. We are so glad we used Eddie and steel and will use him for any future iron projects.

Eddy is one of the most personable and talented craftsmen I have ever done business with! He most…read moredefinitely exceeded my expectations at every turn. His response time was fast, his communication at every step was awesome, his product is superior and the cost was perfectly fair. I have already recommended him to two people and I hope this review will help others to look no further than E.C.A. Ironworks.

Great people Years of experience. Solid advice…read more Troubleshooting within budget and honest turnaround time No surprises at checkout Would send my mom there

This is the only place I'd take my '78 Camaro to, and the crew at Performance Fab has been taking…read moreterrific care of my Mom's '78 Z28 for over 15 years. Not only do they do terrific work, but they're incredibly honest. They really know their way around older cars from the front grille to the exhaust pipe and everything in between. If your older car is running on the rough side, they'll have it purring again in no time!

I had a special cutting job. Mr and Mrs. Van Nuys were very nice and friendly and did a great job…read more Miguel worked with me and my schedule. The price was very reasonable and I thank them for a good job.

We worked with Micah and his folks to design and fabricate four very large COR-TEN steel raised bed…read moreplanters. We loved working with Alloy. They were always easily reachable, quick to respond and helpful in the design and delivery. They helped us make design decisions that worked out very well and helped us figure out how to transport the planters which at their size was a deal itself. Their prices were great (many others we talked too were way higher) and they helped us determine the materials that would make the planters durable. We've already referred them for some other work and would not hesitate to recommend them to others!

We have had multiple pieces of outdoor furniture powder coated by this company and all were…read moreexcellent! Highly recommend!

From my first interaction over the phone with Ben I felt confident and comfortable he would be able…read moreto get my wheels powdered coated, Ben is a super nice guy very informative and extremely easy to work with no hassle just straight forward genuine and true to his word it was $650 to powder coat my wheels he partners up with 5star auto in San Carlos to remove the tiers and mount the tiers back on in order for him to powder coat them turn around time was as promised and I had my car the next day by the end of the day, my only gripe was with 5 star auto which is no fault of Ben or his services but the guys left my steering wheel dirty and greasy which I also noticed on my paint I was able to get it all off but they should be more cautious of it aside from that my tire sensor is on. But again this is no fault of Ben, Ben did an amazing job on my wheels I even had some curb rash damage and it seems like he went above and beyond to correct it because I can't feel the damage anymore on the wheel not sure if he uses some sort of filler before coating but man the wheels look AMAZING!!! Thank you so much Ben I appreciate your work!! Definitely worth every penny I'll be recommending him to my friends and family!!