I came across this Fab/race shop when I was searching for someone to build my C10 a harness bar…read more Jaime was very friendly and welcoming when I arrived. He took the time to give me a tour of the shop and show me some of the vehicles and projects he was working on. I must say, the caliper and quality of work that is done out of this shop is amazing. I had a pretty straight forward vision of what I wanted to be built for my C10. Jaime took the time to find out exactly what I wanted and EXECUTED MY VISION PERFECTLY. The final work was perfect and we'll executed. The welds and bends on the harness bar were beautiful and fit my application amazingly. If you need any kind of fab work done, this is the shop to go to. I definitely will be referring my friends and family to this shop for their projects.

I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

They are very very nice people. They welded my broken water shutoff valve immediately with no…read morewaiting. They did an excellent job and for a very low price. Thank you very much.

I had a plumbing bar that was your typical material, brass, coated with nickle or zinc etc to give…read morea stainless finish, as most plumbing finishes are. I mention this as the handle was about 0.325 inches diameter solid soft brass. It was too long and I needed it shorter. Instead of using a hack saw to cut and sand it myself, I thought to take it to a place that has things setup, the stuff in place, and he can easily cut it. I found him in the business center while I was having somee other work done by another shop. Terry charged me $60 for that 1 cut. Something anyone could have done in about 5-15 minutes, without the setup!. He said, well its hard to get everything right, bla, bla, bla , when I asked why such a high price. His answers were unfounded. Its not like he coated the brass with SS finish, lol. Years later I needed a number of large thick walled posts cut down from 12ft to a shorter length. I made sure not to bother with JayTech. I found a shop on Plummer, off of Desoto and they took these heavy steel posts about 5" in diameter and made the cuts for the same price on 3 pieces of what this guy changed me on a single, less than half inch soft metal. Clean, nice work. I am sure JayTech does decent work, but is as decent a BS ripoff. If he didn't want to do it, or he doesn't deal with cutting, etc he could have just said so, or direct me to someplace that does cut, etc. I have worked around such fabrication shops, and to this day , I wont forget what a rip-off this guy was for him to take advantage. Its not the $ per-say, its the way he went about it. He withheld any idea of what it would cost when I asked before hand, and then did the work, and wanted $60. ...lol...funny now.

Really Good Guy. Very reasonable price considering the…read moreunbelievable job they did Polishing this. The picture really doesn't do it justice.

Vidal is the best great work and a fair price!! He is my go to polisher!…read moreyou wont be disappointed.

Mitch and his team were so easy to work with…read more Ahead of the impending El Nino season, I reached out on Yelp for a quote for gutter installation and he got back to me within a day to schedule. At our appointment, Mitch came prepared with samples and color chips, and talked me through the process and what would be best for the house. He even came back another time to show my husband samples because he wasn't able to be at the initial appointment. It took us a few weeks to decide and Mitch was patient and communicative the whole time. Once it came time for our install, his team worked diligently to get our gutters up and we love the way they look! They custom cut the gutters to your roof so it's pretty seamless and the color and shape we chose look great with our house. We are so happy we went with SoCal Sheet Metal and highly recommend to anyone who needs this work done. They are also very well priced for what you get!

I was very pleased with SoCal Sheet Metal. We needed a replacement for a hard-to-find 2" x 4"…read moredownspout, which was the standard on our 113 year old home decades ago. Mich made the process easy from start to finish. Junior handled the installation and did outstanding work. He arrived on time, completed the job efficiently, and cleaned up thoroughly before leaving. What impressed me most was, although this was a relatively small job, the team treated it as if it were important. That kind of customer service is becoming rare. I would not hesitate to recommend SoCal Sheet Metal to others.

Mr. Aleman does some great welding specifically Aluminum welding his prices are very affordable. I…read morepersonally done many different projects and some trailers welding repair. While other folks dance around pricing he gives me a solid price and gets the job done.

Nice old guy that does some good welding, but pricey for my budget…read more They mostly do wheel repairs but I haven't used them for that.

I found Metal Innovations on Houzz and went to their factory/showroom. I was impressed with the…read morehuge display of stainless railings that Metal Innovations both manufactures and installs. Prior to going to Metal Innovations I had contacted somebody else. That person told me that he gets the parts for the railings at an out of State manufacturer. That person's price was 25% more than Metal Innovations. Metal Innovations prepared a detailed diagram and the finished product looks great. Isaac, the owner of Metal Innovations, is a very sincere and hardworking guy. He is personable and easy to talk to, giving me some terrific insight into the stainless steel railing business. I was happy for Isaac as he had just gotten married to the woman of his dreams and moved her and her two young daughters from Costa Rica to LA. Stainless steel is the way to go if you want a modern house. Metal Innovations offered railing styles with or without glass and I opted for steel only & no glass. My new dark wood floors coupled with the stainless steel balcony looks amazing. Thank you Isaac for an A1, first class job!!! You're the best!!!!

Did an amazing job! Ron came out, I explained what we wanted, he took some measurements, and sent…read moreus CAD drawings for approval. He created EXACTLY what we wanted. The crew did a great job on the install and took the time to do it right. Beautiful quality and craftsmanship.

Excellent customer service very quick response with same day service Excellent work!!! Found…read moreproblems that I was unaware of and fixed them Thank you!!!

I called last minute on a Friday afternoon and was put in the schedule for first thing Saturday. I…read moreshowed up and it was all done within a 1/2 hour and the weld was to pretty to paint!!

Wonderful people to work with. Love supporting a family business. Appreciated the prompt…read morecommunication during all aspects of the job. From estimate to install, everything was smooth and easy. Gate looks great. 100% recommend this company.

I needed a small entry gate to my front yard (5' opening), I reached out to quite a few companies…read moreon yelp, a few responded back with outrageously expensive quotes. When I contacted Duncan welding, I received a response very quickly. Their answers were direct and addressed my needs and they were happy to answer my questions. They provided a reasonable, and affordable quote, and one that was close to the actual, final cost. The quality of the work completely blew me away, I am so impressed. The level of craftsmanship, attention to detail, and obvious passion for the craft really shines through in this gate. Everything is level, straight, and fits perfectly. Truly a master in his craft. As a person who prefers to give business to a local, family owned company, I would absolutely recommend David, and Kelsey of Duncan welding to anybody reading this and I will be a continued customer for any future fabricating needs. Thank you guys very much.