I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

Jaime is a great guy. I would not put any weight on the one negative review, it does not match my…read moreexperience at all. He was transparent from the start, took on my random job without hesitation, and delivered exactly what he said he would. He is knowledgeable, competent, and easy to work with. I would highly recommend him to anyone I know.

I had a plumbing bar that was your typical material, brass, coated with nickle or zinc etc to give…read morea stainless finish, as most plumbing finishes are. I mention this as the handle was about 0.325 inches diameter solid soft brass. It was too long and I needed it shorter. Instead of using a hack saw to cut and sand it myself, I thought to take it to a place that has things setup, the stuff in place, and he can easily cut it. I found him in the business center while I was having somee other work done by another shop. Terry charged me $60 for that 1 cut. Something anyone could have done in about 5-15 minutes, without the setup!. He said, well its hard to get everything right, bla, bla, bla , when I asked why such a high price. His answers were unfounded. Its not like he coated the brass with SS finish, lol. Years later I needed a number of large thick walled posts cut down from 12ft to a shorter length. I made sure not to bother with JayTech. I found a shop on Plummer, off of Desoto and they took these heavy steel posts about 5" in diameter and made the cuts for the same price on 3 pieces of what this guy changed me on a single, less than half inch soft metal. Clean, nice work. I am sure JayTech does decent work, but is as decent a BS ripoff. If he didn't want to do it, or he doesn't deal with cutting, etc he could have just said so, or direct me to someplace that does cut, etc. I have worked around such fabrication shops, and to this day , I wont forget what a rip-off this guy was for him to take advantage. Its not the $ per-say, its the way he went about it. He withheld any idea of what it would cost when I asked before hand, and then did the work, and wanted $60. ...lol...funny now.

My beloved three-year-old ebike suffered a stress fracture at the seat tube weld beneath the clamp…read moreand if not for Jaytech I'd still be mourning its untimely demise. Thanks to Terry T. at Jaytech she rides again. He repaired the crack and was thorough enough to notice the interior of the seat tubing was wider than at the mouth and recommended the addition of stabilizing screws to prevent future movement that would ultimately stress the new weld and break it again. The additional work and bare aluminum gives her a bit of a "Frankenbike" vibe , but I'm digging it. They're like a survivor's badges of honor.

Really Good Guy. Very reasonable price considering the…read moreunbelievable job they did Polishing this. The picture really doesn't do it justice.

Vidal is the best great work and a fair price!! He is my go to polisher!…read moreyou wont be disappointed.

Just had the gutter installed. It looks great, everthing went well…read more Installers were fast and neat. Mitch, the one that gave the quote for the job was great. He keep on top of the job from start to finish. There were no hiccups nor changes in the price quote. I will wait and see after the first rain storm to see how well the gutter performs. So far I'm happy with the results. If all goes well during the next rain Strom, I will definitely recommend SoCal Sheet Metal.

Excellent customer service and quality gutters! My husband reached out to SoCal Sheet Metal to get…read morea quote for gutter replacement for my mother's home. Mitch, one of the owners, reached out to me right away and offered to stop by the house on a Sunday. I appreciated that he came on a weekend and was prepared with not only color selections, but an actual gutter sample as well as a mesh guard sample. He also explained how the gutters would be mounted and installed on different areas of the house. I was able to have everything installed the following Friday. His workers were very friendly and cordial as well. I highly recommend SoCal Gutter Sheet Metal for all your gutter replacement and fabrication needs.

Mr. Aleman does some great welding specifically Aluminum welding his prices are very affordable. I…read morepersonally done many different projects and some trailers welding repair. While other folks dance around pricing he gives me a solid price and gets the job done.

Nice old guy that does some good welding, but pricey for my budget…read more They mostly do wheel repairs but I haven't used them for that.

Did an amazing job! Ron came out, I explained what we wanted, he took some measurements, and sent…read moreus CAD drawings for approval. He created EXACTLY what we wanted. The crew did a great job on the install and took the time to do it right. Beautiful quality and craftsmanship.

Use this company for a quality job! Ron @ Metal innovations is an excellent design specialist and…read moretheir workmanship is outstanding.

Wonderful people to work with. Love supporting a family business. Appreciated the prompt…read morecommunication during all aspects of the job. From estimate to install, everything was smooth and easy. Gate looks great. 100% recommend this company.

I needed a small entry gate to my front yard (5' opening), I reached out to quite a few companies…read moreon yelp, a few responded back with outrageously expensive quotes. When I contacted Duncan welding, I received a response very quickly. Their answers were direct and addressed my needs and they were happy to answer my questions. They provided a reasonable, and affordable quote, and one that was close to the actual, final cost. The quality of the work completely blew me away, I am so impressed. The level of craftsmanship, attention to detail, and obvious passion for the craft really shines through in this gate. Everything is level, straight, and fits perfectly. Truly a master in his craft. As a person who prefers to give business to a local, family owned company, I would absolutely recommend David, and Kelsey of Duncan welding to anybody reading this and I will be a continued customer for any future fabricating needs. Thank you guys very much.

Had a crack on my wheel and they were able to fix it the same day as other shops said it will take…read morea day if not more

My car was making a Ticking sounds in two different locations. It happened when I would turn on the…read morecar, turn or switch the AC/ Heater, while driving, and even if I looked at my car! I went here and spoke to Marshall (owner) about the problem. He was so professional and knowledgeable!! He fixed my car right away and gave me a great price for the new parts!! If I would've gone somewhere else I would've been charged a lot more and probably created a new problem. So happy I came here! My car is working perfectly now! 2013 Chevy Impala