I had a plumbing bar that was your typical material, brass, coated with nickle or zinc etc to give…read morea stainless finish, as most plumbing finishes are. I mention this as the handle was about 0.325 inches diameter solid soft brass. It was too long and I needed it shorter. Instead of using a hack saw to cut and sand it myself, I thought to take it to a place that has things setup, the stuff in place, and he can easily cut it. I found him in the business center while I was having somee other work done by another shop. Terry charged me $60 for that 1 cut. Something anyone could have done in about 5-15 minutes, without the setup!. He said, well its hard to get everything right, bla, bla, bla , when I asked why such a high price. His answers were unfounded. Its not like he coated the brass with SS finish, lol. Years later I needed a number of large thick walled posts cut down from 12ft to a shorter length. I made sure not to bother with JayTech. I found a shop on Plummer, off of Desoto and they took these heavy steel posts about 5" in diameter and made the cuts for the same price on 3 pieces of what this guy changed me on a single, less than half inch soft metal. Clean, nice work. I am sure JayTech does decent work, but is as decent a BS ripoff. If he didn't want to do it, or he doesn't deal with cutting, etc he could have just said so, or direct me to someplace that does cut, etc. I have worked around such fabrication shops, and to this day , I wont forget what a rip-off this guy was for him to take advantage. Its not the $ per-say, its the way he went about it. He withheld any idea of what it would cost when I asked before hand, and then did the work, and wanted $60. ...lol...funny now.

My beloved three-year-old ebike suffered a stress fracture at the seat tube weld beneath the clamp…read moreand if not for Jaytech I'd still be mourning its untimely demise. Thanks to Terry T. at Jaytech she rides again. He repaired the crack and was thorough enough to notice the interior of the seat tubing was wider than at the mouth and recommended the addition of stabilizing screws to prevent future movement that would ultimately stress the new weld and break it again. The additional work and bare aluminum gives her a bit of a "Frankenbike" vibe , but I'm digging it. They're like a survivor's badges of honor.

Really Good Guy. Very reasonable price considering the…read moreunbelievable job they did Polishing this. The picture really doesn't do it justice.

Vidal is the best great work and a fair price!! He is my go to polisher!…read moreyou wont be disappointed.

Excellent customer service and quality gutters! My husband reached out to SoCal Sheet Metal to get…read morea quote for gutter replacement for my mother's home. Mitch, one of the owners, reached out to me right away and offered to stop by the house on a Sunday. I appreciated that he came on a weekend and was prepared with not only color selections, but an actual gutter sample as well as a mesh guard sample. He also explained how the gutters would be mounted and installed on different areas of the house. I was able to have everything installed the following Friday. His workers were very friendly and cordial as well. I highly recommend SoCal Gutter Sheet Metal for all your gutter replacement and fabrication needs.

Mitch and his team were so easy to work with…read more Ahead of the impending El Nino season, I reached out on Yelp for a quote for gutter installation and he got back to me within a day to schedule. At our appointment, Mitch came prepared with samples and color chips, and talked me through the process and what would be best for the house. He even came back another time to show my husband samples because he wasn't able to be at the initial appointment. It took us a few weeks to decide and Mitch was patient and communicative the whole time. Once it came time for our install, his team worked diligently to get our gutters up and we love the way they look! They custom cut the gutters to your roof so it's pretty seamless and the color and shape we chose look great with our house. We are so happy we went with SoCal Sheet Metal and highly recommend to anyone who needs this work done. They are also very well priced for what you get!

Mr. Aleman does some great welding specifically Aluminum welding his prices are very affordable. I…read morepersonally done many different projects and some trailers welding repair. While other folks dance around pricing he gives me a solid price and gets the job done.

Nice old guy that does some good welding, but pricey for my budget…read more They mostly do wheel repairs but I haven't used them for that.

I found Metal Innovations on Houzz and went to their factory/showroom. I was impressed with the…read morehuge display of stainless railings that Metal Innovations both manufactures and installs. Prior to going to Metal Innovations I had contacted somebody else. That person told me that he gets the parts for the railings at an out of State manufacturer. That person's price was 25% more than Metal Innovations. Metal Innovations prepared a detailed diagram and the finished product looks great. Isaac, the owner of Metal Innovations, is a very sincere and hardworking guy. He is personable and easy to talk to, giving me some terrific insight into the stainless steel railing business. I was happy for Isaac as he had just gotten married to the woman of his dreams and moved her and her two young daughters from Costa Rica to LA. Stainless steel is the way to go if you want a modern house. Metal Innovations offered railing styles with or without glass and I opted for steel only & no glass. My new dark wood floors coupled with the stainless steel balcony looks amazing. Thank you Isaac for an A1, first class job!!! You're the best!!!!

Did an amazing job! Ron came out, I explained what we wanted, he took some measurements, and sent…read moreus CAD drawings for approval. He created EXACTLY what we wanted. The crew did a great job on the install and took the time to do it right. Beautiful quality and craftsmanship.

Excellent customer service very quick response with same day service Excellent work!!! Found…read moreproblems that I was unaware of and fixed them Thank you!!!

I called last minute on a Friday afternoon and was put in the schedule for first thing Saturday. I…read moreshowed up and it was all done within a 1/2 hour and the weld was to pretty to paint!!

Wonderful people to work with. Love supporting a family business. Appreciated the prompt…read morecommunication during all aspects of the job. From estimate to install, everything was smooth and easy. Gate looks great. 100% recommend this company.

I needed a small entry gate to my front yard (5' opening), I reached out to quite a few companies…read moreon yelp, a few responded back with outrageously expensive quotes. When I contacted Duncan welding, I received a response very quickly. Their answers were direct and addressed my needs and they were happy to answer my questions. They provided a reasonable, and affordable quote, and one that was close to the actual, final cost. The quality of the work completely blew me away, I am so impressed. The level of craftsmanship, attention to detail, and obvious passion for the craft really shines through in this gate. Everything is level, straight, and fits perfectly. Truly a master in his craft. As a person who prefers to give business to a local, family owned company, I would absolutely recommend David, and Kelsey of Duncan welding to anybody reading this and I will be a continued customer for any future fabricating needs. Thank you guys very much.

Had a crack on my wheel and they were able to fix it the same day as other shops said it will take…read morea day if not more

My car was making a Ticking sounds in two different locations. It happened when I would turn on the…read morecar, turn or switch the AC/ Heater, while driving, and even if I looked at my car! I went here and spoke to Marshall (owner) about the problem. He was so professional and knowledgeable!! He fixed my car right away and gave me a great price for the new parts!! If I would've gone somewhere else I would've been charged a lot more and probably created a new problem. So happy I came here! My car is working perfectly now! 2013 Chevy Impala