I came across this Fab/race shop when I was searching for someone to build my C10 a harness bar…read more Jaime was very friendly and welcoming when I arrived. He took the time to give me a tour of the shop and show me some of the vehicles and projects he was working on. I must say, the caliper and quality of work that is done out of this shop is amazing. I had a pretty straight forward vision of what I wanted to be built for my C10. Jaime took the time to find out exactly what I wanted and EXECUTED MY VISION PERFECTLY. The final work was perfect and we'll executed. The welds and bends on the harness bar were beautiful and fit my application amazingly. If you need any kind of fab work done, this is the shop to go to. I definitely will be referring my friends and family to this shop for their projects.

I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

Had a crack on my wheel and they were able to fix it the same day as other shops said it will take…read morea day if not more

My car was making a Ticking sounds in two different locations. It happened when I would turn on the…read morecar, turn or switch the AC/ Heater, while driving, and even if I looked at my car! I went here and spoke to Marshall (owner) about the problem. He was so professional and knowledgeable!! He fixed my car right away and gave me a great price for the new parts!! If I would've gone somewhere else I would've been charged a lot more and probably created a new problem. So happy I came here! My car is working perfectly now! 2013 Chevy Impala

Thank you to David at Edward Sheet Metal for helping us with custom ductwork and linear registers…read morefor our new home! Everything was delivered on time, and he even followed up afterward to make sure everything was working perfectly. Truly great service!

This guy makes my of my out of ordinary raceways and gutters for electrical jobs. I am an…read moreelectrician . He's always quick to accommodate me, does a great job and very reasonably priced. Thank you David.

These guys can weld anything! I had a very unusual request to weld a small spot, difficult to get…read moreto on the passenger side of my upper control arm in my 68 Cadillac (IYKYK). And the metals on this particular part are not exactly the easiest to weld together...but they did it! And two of the nicest, most honest guys I've ever met in all my years of being in the classic car hobby! Highly recommended!

A1 welders Norbert and Cecilia properly repaired an iron gate 3 prior welders/contractors could…read morenot! The welder Norbert was on time to my Moms home where a very heavy gate had not been installed properly, and after time the problem only got worse due to the weight of the gate, and the failure by the installer to anchor the gate with brackets! We are amazed. satisfied and moving forward with A1, as Our back fence needs to be replaced not just repaired.

This shop is a gem in Canoga Park…read more Andrew took on a small job drilling and re-tapping some frozen studs on a NLA Porsche wastegate, bringing this part from unusable to like new. Fast turnaround and great communication as well.

It's hard to find a place willing to take on small jobs, but Andrew handled mine quickly and did an…read moreexcellent job. Great quality work--highly recommended!

Mr. Aleman does some great welding specifically Aluminum welding his prices are very affordable. I…read morepersonally done many different projects and some trailers welding repair. While other folks dance around pricing he gives me a solid price and gets the job done.

Nice old guy that does some good welding, but pricey for my budget…read more They mostly do wheel repairs but I haven't used them for that.

I have been utilizing their services for over 30 years. I am an aerospace fastener manufacturer,…read moreand I have always gotten the best service from Van Nuys Plating. We use them mostly for gold and silver plating, but do not hesitate to use them for any of their services. Awesome communications, great customer service, quality results!

Fantastic job on the chrome re-plated on our bathroom vent. We are very happy with the work that…read morethey did for us. Highly recommend Van Nuys Plating.

S & V Machining is First Class. They are truly a team to be recognized. I had a personal project…read morethat i was and am prototyping out. I brought the specs to them and they were ready to jump on board. They even completed it very quickly in their busy schedule with the holidays. I actually went to a few other places but "S & V" is the way to go. Forget the rest and deal with the best. Save your time & money. Their communication is on point and prompt. Their service and friendliness is stellar. The quality of work is on another level. They are "THE BEST" in what they do. This tag team duo is HIGHLY RECOMMENDED and i already know i will be back to see them for future plans. Their equipment and material are top notch. Thank you S & V!

5 stars all around. Amazing work and they got it done overnight. That's almost unheard of these…read moredays. Took my bike in for a custom spacer for my axle, and they took care of it. Perfect fitment. I will do business with them again.