You can't make this stuff up. Called to be certain they had the items I needed. Emily says we have…read morethem and will put them under my name. Show up after my 40 minute drive and Emily doesn't have them and offers expedited shipping! Just ordered it on Amazon, be here between 4 and 8 am tomorrow. You try to give the local brick and mortar stores the business and this is what you get. Apparently your time and fuel costs are not valuable to cycle gear. This is my second bad review for these guys, it takes a lot for me to give bad reviews. I prefer to give good reviews.

Staff are always above excellent. Just today, I went in for a faulty headset speaker. Emily…read moretroubleshot it, and replaced it within minutes. I then inquired about an anti fog film for my visor. She found one that fit, and immediately applied it without having to ask.

Brought my Mustang to Josh and was impressed by his courtesy, professionalism, knowledge, and…read morepatience. Looking forward to having my car back in his shop.

From the owner: Old School Hot Rod and Bike shop. Custom one-off work on any American muscle. Parts, service,…read moreone-off work, tune-up to full restore. I have been a True hot rodder to the core from day one, my daily driver is a hot rod, my first car was a hot rod, I have spent years going to school and working hands on. The things I have built have been in national mags I have been in Colorado mags countless times. I would love to help you get your dream car or bike. I think the world is better with the true American crafted and built cars and bikes on the road.

Service and Parts selection is outstanding. I didn't realize there were as many accessories…read moreavailable for my car either. Every little department inside the giant warehouse-like shop is upbeat, down to earth and amazingly helpful. Happy to support local too. Remember to grab your complimentary coffee and/or drink. I chose a peach Italian soda when I went and that hit the spot. They have car meets the second week of each month. When we went there was a fundraiser and adoption event for puppies. I would recommend going here. They also have cars and trucks parked inside the showroom to show you how these accessories work!

Never would I have thought I'd be excited for a car accessory store (and their headquarters!) but…read morehere I am! We stopped by here since they were having a car show along with food truck and puppy adoptions. I've seen commercials for WeatherTech and know that you could bring your dog here which is always an incentive to go somewhere! AND they gave a free coffee bar inside? Sign. Me. Up. I thought it was going to be some crappy car store coffee that would put hair on my chest but nope, full coffee bar with drinks made to order! While we didn't buy anything, their showroom is beautiful and displays amazing accessories that they make onsite. I'm not in the market for anything but I will stop here when I start to ponder some goodies for my whip (and bring our dog again!)

Dylan was incredible. I've never seen a car place have such great reviews, but I see why now…read more Everyone was so sweet and helpful. Dylan helped me replace my brake light super quickly. Would absolutely recommend.

I had a great experience here when I stopped in to get new wiper blades. A super friendly staff…read moremember was very helpful in answering my product questions and helped me install the new blades. I was in & out in no time!

Great guy helped me today. on a 1500 mile trip and my Amazon pegs broke. They helped me out and…read moreeven lent me use of his calipers to go size my bike to get the right part. cool shop and very helpful. Thanks again.

I don't know about how they treat minorities but Arland had a guy "helping" and I told him I was…read morelooking for a tail light to replace my turn/stop side lights on the rear of my new 22 street bob since I built a sissy bar for it. Now granted, electric Stuff isn't my game but come to find out not only was the plate specifically not made for my bike, it requires another part for even partial function ( per custom dynamics) .. so now I'm down for however long the fucking extra part comes in. Ass is 75 bucks more sore and all I wanted was a ducking stop light with a plate light on it... lesson here is don't ask an older grandpa jack shit about new bikes and don't let them sell you shit you didn't ask for initially...

Just wanted to give a big shout out to Charlie. I had a surprise oil leak and a laundry list of…read moreother things that needed to get done. Charlie answered the phone promptly to see about getting my bike in ASAP, as I was stranded in Boulder with no way of getting home. He stayed late just so I could get my bike in and I couldn't be more thankful. Boulder Motorsports and their staff don't just value the ride, but the Rider. I'm sure as the next few weeks roll by I will not be disappointed in the work they put in to get my machine back in tip top shape.

I'm on a month-long motorcycle trip and n Day 3 suffered a sheared off gear shift lever, at a…read morescenic viewpoint 48 miles away from my friends' place. After creating a makeshift lever with the help of my friends, I went about calling around the Denver-area motorcycle dealers to see who had a lever in stock. No joy, until I spoke to Donnie at Boulder MotorSports. He came through with the amazing offer of the same lever off the owner's personal bike! Saved my trip! These guys are awesome!!!

Came here to grab some motorcycle gear. The staff is super welcoming and very knowledgeable. For…read morebeing downtown they store is a nice size and has tons to offer; helmets, jackets, pants, boots-- for both men & women. They also have some accessories; gloves, intercoms, protective gear, etc. One stop shop for all your moto stuff. Much recommended.

So glad there's a Revzilla store in my area (Denver)....gives me the best of both worlds: great…read moreretail experience, or online shopping when I know what I need. The store is just more fun, since you can learn from the experienced staff, and walk out with the goods. Highly recommend the membership account they offer...it works for me since I'm able to save more money on the things I need to buy over the course of the riding season. Revzilla online resources are great, too. Truly, the best of both worlds.

I want to O'Reillys in Arvada and the guy acted so stupid so he got a bad review. So I came over to…read moreAutoZone and one of the guys came out and he helped change the bulb and he helped me with a few things. Yes, I would recommend this place

Young kid with the Edgar cut had an attitude he had to check me out. Didn't say one word and walked…read moreaway while I was paying. He's lucky I didn't decline the payment on my end and walk out with my purchase. Please train your employees to have respect and be professional while on the clock!!

*Posted this on Google Reviews, but posting on here as well for more visibility :)…read more I've been strolling into Erico for a few short years now. Before, it was always just to look because they were a cool shop with cool bikes and who doesn't love that? I wasn't a rider back then, more of an aficionado, but I always told my boyfriend that maybe one day I will actually get something from there. Fast forward to Saturday, Feb. 25th and I have my new Triumph Speed Twin 900 with the help of the fantastic team at Erico! I am still in my beginner phase, so it was truly helpful to have these guys thoroughly explain all that it means to own a bike and really help me decide on which was the best choice for me. One thing that cemented my interest in visiting Erico before any other dealership was that they were extremely helpful when I first called to ask the silly question of whether a Triumph can be a good first motorcycle (there was a little intimidation when thinking about investing in such a beautiful brand since there's always the possibility of dropping it, higher speeds, etc). I had called up a few dealerships both in CO & CA, and Erico really made the best first impression out of all. David Mack, Erico's sales manager, not only went above and beyond to answer any question while following up with relative key product features, but also did that while off the clock! He didn't even have to, but the fact that he did made me believe Erico cares a lot about their riding community. Massive shoutout to David, Deonte, Logan, Joe F. & Joe B. (with special mention to Justin and Sterling for the chats) for helping me with the whole purchase process! You guys were great to work with, and I feel confident that I chose the right dealership. Love a good company that has so much heart in what they do, and if you've read up on Erico's history or have been to their shop, you know this is one of those places. Thank you, Erico!

I hesitate to be "that guy", but…read more.... I had a new battery installed on my Triumph. You have to remove the ECM bracket in order to get the battery in or out. This is done by undoing one bolt. Not knowing about the bolt, they broke the ECM bracket by trying to pry it out of the way. This YELP review is about this particular incident, but there have been others. There have been obvious problems that should have been seen by the mechanic and/or the service manager, resulting in service that I would have had done. A service manager needs to inspect every job before he/she signs off on it. They don't do that here, otherwise they would have caught these things. The owner is a good guy and they carry a line of bikes I find appealing but the service dept. really needs either better, or more, people. I've owned a lot of bikes over the years and worked in the service and parts departments at a few shops. This wouldn't fly anywhere I ever worked. Their service manager will always feign ignorance in an effort to upsell you on unneeded and expensive diagnostic work. And only rarely will own up to a mistake they might have made.

Took my heavy duty truck integral hubs/rotors to O'Reilly's where the manager told me they would…read morehave to be separated/reassembled (extra 2 hours work) and a special adapter (that he didn't have) would be needed to machine the rotor. Called and talked to Dave at University who told me he thought he could machine the rotors without removing the hubs. Took them over to him and he had them both done in less than an hour. Superior knowledge and excellent service.

Great place to get your stuff. Judie and Russel really helped me out with finding my lightbulbs.read more