My kitchen chair broke recently, and I really needed it for an upcoming party. Matt got the piece…read morethat needed work and had it done in MINUTES! WOW! It looks fantastic and I was beyond impressed with the turnaround time. Highly, highly recommend!

Local shop that does great custom fabrication work. While they work on big projects they still…read morecater to smaller projects as well. I had a "small" project for them to help me resolve a fence post issue. I drew up a sketch on CAD and explained it personally to Matt. He was very attentive and asked very constructive questions in his attempt to help me value engineer my project. I had a pretty quick turn around request that they were able to meet and I ended up with my custom 4x4 to 4x6 post adapter. It came out better than I expected. I wouldn't hesitate sending work their way.

If you're looking for welding or similar metalwork, your search is over. Go here…read more I recently bought an old steel bike frame with a very poor repair to one of the joints: there was barely any metal holding the joint together, and there was a hole melted in one of the tubes. I was concerned that it'd be hard to get the joint properly repaired, and/or prohibitively expensive. I stopped by Custom Metal Manufacturing around opening time. The workshop is a treasure trove: minibikes, custom signs, and sculptures everywhere. Ed and Gerard were super friendly and great storytellers. Ed looked at the frame, said "I can fix that", and fired up his welding gear right away. Ten minutes of good conversation later the work was done, and at a very reasonable price. The joint is now reinforced with ample steel, and the hole is closed up. Everything I hoped for and more.

A shoutout to CMM. I decided to drive over with an item that needed welding. They were able to…read morecomplete the job right away. Friendly service at a competitive price (another company was 4x more expensive and said it would take a few days). If you need some welding, call or visit them. You will not be disappointed.

Alfonso is our Man...! every time we need a welding service in our big project and even in small…read moredetails. He knows what he is doing. He helped us to correct with our new built iron gate (which was welded incorrectly from a gate contractor.) He's been also helping me welding small, but difficult details on my boat. He answers calls promptly and respectful. Highly recommended.

I have a great experience with Welder from this company. The team was very professional. They…read morecomplete their job on time. I am delighted with the service. They understood what my expectations were and did the amazing work. Highly recommended!

Scott helped me form some stainless sheet metal on their press break and helped me with some other…read morestainless parts for one of my jobs ... Chris is extremely knowledgeable and great group of guys that have been doing quality welding and fabrication side of the wine industry for over a decade

I called and needed help with an odd job in a pinch, and Scott came out and helped me out just a…read morefew hours after I called. Everyone I spoke to at Crush was so friendly and they are just the nicest people. If you're in a pinch or need some good work you can count on these guys, they'll have your back!

Disappointing experience overall…read more Verbal bid was given of 10k to 11k for the job over a FaceTime phone call as the project was explained. I politely asked if he could please try to keep it near the 10k. Written bid came in over 11k. (11,700$) Discussed that the bracing for the large metal stairs should probably be secured by something more than anchoring into stucco. To add proper supports the bid goes up again to over 12k. (12,800$) I would have liked a more professional experience where pricing didn't keep changing and for Christian to take the lead on making the stairs braced correctly and safely from jump. He kept saying this is simple we don't need to discuss the job so much. Also I had originally texted him to FaceTime me when he was onsite. He was on time but didn't respond to my texts. Had to wait 20 minutes for a response. He already left the job. Had to drive back to the job to be able to Facetime me. It is a large job that involves a lot of safety concerns. Was really looking for more professionalism to have the job bid correctly from the beginning and the scope of the job to be discussed throughly on time to get it created safely.

Christian (Kriz) was amazing to work with. Friendly, listened to the goal and great resulting…read moreproduct. Would definitely use again

Jose was excellent! He asked great questions to make sure he understood what I wanted, communicated…read morewell and often and was prompt! Highly recommend!

I had Jose Install stairway handrails for front and backyard. He did an excellent job. I most…read moreappreciated the fact that he responded to me immediately and kept in contact with me throughout the process. He even sent a video of the progress he was making. I plan on hiring him for another job next month.

Flawlessly fabricated a set of custom anodized aluminum sailboat hatch frames. Specifically, Taylor…read morewas a deeply knowledgeable professional craftsman who collaborated with precise communication skills in the manner of a trusted advisor. I've always believed that a company can/should be judged by the quality of its employees. As such, CCMF is fortunate to have such great skilled workers contributing to its longstanding success. I recommend them without hesitation.

I needed a quick one weld job in a pinch. Called and they said come on down - they completed the…read morejob while I waited. Great service and fair price. I will be back with a bigger job for sure!

Great folks, Sal and his son, with genuine long history in the automotive industry. He operates…read morewith no BS expensed which provided me the confidence I needed. Simply needed the axle housing welded to center but required a bit of an expert due to dissimilar metals. He knew that prep, specific nickel filler rods was needed, and post weld procedure are required to prevent cracking. Laid down some good beads. 10/10 will recommend for any automotive projects and hopefully will come back again with another project.

Amazing service. They're a small 2 man crew, but both Sal and his son are focused on quality and…read moreattention to detail. I just needed a small precision cut of an oven vent (stainless steel) and yes, it was pricey, but super quick and worth every penny. They focus on the racing and auto business, but do a lot of other work. I really appreciate the work and new friendship. Highly recommend.

I was looking for a fabricator who could design and install a custom metal gate for my driveway…read more Went with GBF, and throughout the design and installation I always felt the ultimate goal for John and company was to give me the gate I was looking for. John is great to collaborate with and I could not be happier with both design and the high quality of their craftsmanship. I absolutely would recommend them for anyone who's looking for custom metal work. Charles D

Gorgeous work. Really make dreams come alive. John will be looked at as an artist of his time.read more

Edgar rules!!!! I wish I could give him 10 stars. A true artist who delivered an improved upon…read moreversion of what I wanted, which, btw, a Marin company bid at literally six times his price. If you're in a mad rush Edgar may not be your guy, but if you want metal work that's beautifully crafted and properly installed at a more than reasonable cost, he's the best! I called at least 10 Metal Fabricators all over the Bay Area and most of them didn't even respond when they saw what I wanted them to make. Edgar embraced the challenge and delivered beyond my wildest expectations. 10 stars indeed.

From the owner: Custom metal fabricating/ artistic metal work, mixed- media sculpture. Design, build, odd ball,…read morechallenging, unique one of a kind projects, requiring creativity and thinking out of the box. I am way more than just a welder. I have fifty years of experience in working with metal and other materials. I have gone from silver and gold to steel, copper, brass, bronze etc.Restorations of metal fine art objects.