OMG!!!!! I'll never go anywhere else. The quality speaks for itself. The way their team works…read morewith you and keeps you involved in the entire process really sets them apart. They really care about the work they put out there.

If you need powder coating, Premier is hands down the best! They sand blast in-house, primer (no…read moreother shop does), & of course powder coats. They are extremely helpful & very friendly! It's hard to find a good powder shop, yet this place never disappoints. The pride they take in their work shows through their quality!

17 years experience. Always great service. Need 85…read morecharacters to tell the story. Could not be better.

I was introduced to American Powder Coating by Josh (Sandblaster), from Performance Coatings. Since…read morethen, he would always handle the entire blast & powder process until I recently had to haul very large pieces over to them from blasting. I've gotten to know some of the guys a bit & they've always been friendly. They're busy & their work doesn't suffer from it. Fast turnaround with fair pricing. Don't hesitate to get any powder work done by them! Included is the picture of the rack they did for us in black. Can't promise you the same, but they wrapped it up the next day after we dropped it off!

Chris is a cool dude with a nice sense of humor. I was stuck between colors and he helped me pick a…read morereal nice looking silver. Got the job done quickly and of quality, priced very fair. Covered all threaded holes and bearing tapers, done by a true professional. Will definitely be going back for more parts.

Needed a steel plate bumper sandblasted of it's old paint, epoxy and powder coated. Called around…read moremany puget sound coating businesses and found Ken's in Tacoma. Most of the shops near my home in Seattle were asking for $350+ for the job. I spoke with a nice lady on the phone initially and was told the turnaround time would be a week, or less if I needed the job done quickly. Ken's is only open M-F and closes at 5 but they do sometimes work Saturdays if they have to. When I arrived at their facility I spoke with Allan who quoted me $250 for sandblasting, epoxy and powder. Initially he said it may take 2 weeks but may be done in a week if he can. Less than a week later Allan told me the bumper was done and ready for pick-up. The whole transaction was quick and the quality of work is really nice. They plug up all the threaded holes before coating. Finish came out with a medium texture black which looks really nice. None of the little crevices were missed. Now I'm a little hesitant to take it through the bushes because it looks so good! I'd recommend Ken's. They specialize in coating anything from auto parts to industrial/commercial pieces. Talk with Allan personally and see if he can beat the price of their competitors.

I had a flat file that needed to be sandblasted and then re-powder coated. It was previously spray…read morepainted a horrendous purple color, which was flaking off onto the artwork that I wanted to store in the flat file. After taking it to Northwest Powder Coating, they had it whipped up good as new, with a super sleek lookin gun metal grey finish. All of the other places that I reached out to for quotes for this job quoted me something like 3-4 times the price that Northwest Powder Coating quoted. The price they originally quoted ended up being about the same as what they charged me in the end. I am very happy with the service, quality, and value that I received!

There website states that "we typically use a chemical bath process to remove...impurities.". So I…read moredrove down there to have a small tank stripped for coating. I walk in and ask the guy "do you do chemical dipping to strip parts". He replied " no , we don't do that here". What the hell! Thanks for wasting my day.

Excellent experience. Jimbo quoted a reasonable price and finished what I requested. Price was…read morequite reasonable and the quality was excellent. While working my project I discovered that I missed a part that required powder coating. I brought it down and had that extra piece taken care of, at no additional cost. I have a few projects coming up, Jimbo's has a loyal customer who will continue to get all of my business.

This review truly is "Woohoo! As good as it gets!" I needed a stainless steel wall backsplash for…read moremy new range. They patiently explained the details, we agreed to a simple design, and a short time later... poof! All done and looks terrific!

Great experience! They manufactured custom metal square pipes for holding equipment on my truck and…read morewelded them on, and everything in a timely fashion. Would recommend to anyone

Professional and knowledgeable, prices are agreeable for the region. Staff is friendly and helpful.read more

Brought my head In to get some work done. Staff was super friendly and turn around time was just…read moreabout 4 hours. They cleaned the head re surfaced and did a valve leak down test. Definitely will have more business from me. Dropped the head off at 830 and got called just after 12 same day to pick up. Awesome place and awesome staff.

Here is my review of Dishonest performance. I brought my…read moretruck rotors into have them turn down. The thickness has to be measured. If they're too thin they can't turn them down because the rotors will crack. The young kid used dial calipers to measure them and purposely applied more pressure to the dial calipers to give a false reading. Then told me I needed a new rotor. When I asked him what the minimum thickness was he couldn't even tell me . This is an old trick it's been used for years.. then he told me the rotors would be ready by noon ... wrong I will never shop at dis honest performance in Federal Way ever again......

I am not a car builder or hot rod builder by any means but i was looking for some particular parts…read morefor an older vehicle and checked these guys out. The knowledge Jimmy had was amazing. Not a typical auto parts store but a specific place for car builders. They had everything I needed and knew exactly what I was talking about when I asked questions. Not at all like the traditional auto parts stores who for the most part just don't have this knowledge. They are worth a try if you need parts or just to ask a question. They are great!!!