I can't say enough good things about Brad & Josh at Performance. I have known them for years now, &…read moretheir work never seizes to amaze me. I typically bring them something every week! Turnaround time has always been prompt. I'd say average, around a week. Brad has been in the coating business for over 25 years, & it shows. His experience & expertise is unmatched! Bring your parts in & soon you'll realize why they're the best. Not only that, but they're extremely humble about it. Which is why I'm writing this review. They don't advertise or brag about the work they do/done. I've seen some very high profile parts come through there. Big or small, they take care of their customers in any way they can! I'm proud to say they have developed into good friends of mine.

Brad was extremely helpful from the beginning via E-mail, replied quickly and was real informative…read more Had a couple quotes from other shops on getting my unequal length header ceramic coated. This location was the furthest from home, but I will drive back again no problem! Highly recommended, you really get what you pay for.

OMG!!!!! I'll never go anywhere else. The quality speaks for itself. The way their team works…read morewith you and keeps you involved in the entire process really sets them apart. They really care about the work they put out there.

If you need powder coating, Premier is hands down the best! They sand blast in-house, primer (no…read moreother shop does), & of course powder coats. They are extremely helpful & very friendly! It's hard to find a good powder shop, yet this place never disappoints. The pride they take in their work shows through their quality!

Excellent experience. Jimbo quoted a reasonable price and finished what I requested. Price was…read morequite reasonable and the quality was excellent. While working my project I discovered that I missed a part that required powder coating. I brought it down and had that extra piece taken care of, at no additional cost. I have a few projects coming up, Jimbo's has a loyal customer who will continue to get all of my business.

I have been going here since 2019 - Chris and his team do great work, they have huge capacity, and…read morealways finish the job on or before the date they said they would, usually within 3-5 days from when I drop it off. I also like that they are easy to get to from all of my jobsites around the area

I purchased and paid for Model A Tacoma Cream paint on February 10. I have not received the product…read morenor have they RETURNED ANY OF MY 7 PHONE CALLS. When you call, they never answer the phone. I don't know how they can run a business like that. They also have a website called ModelAwheelcolors.com. If you google that name, you will see various blogs complaining about this company. I hate to do it, but I will be backchargipg this company if I don't receive my paint.If they can't return a phone call, why would you want them to paint your stuff? Buyer beware!!

Chris is a cool dude with a nice sense of humor. I was stuck between colors and he helped me pick a…read morereal nice looking silver. Got the job done quickly and of quality, priced very fair. Covered all threaded holes and bearing tapers, done by a true professional. Will definitely be going back for more parts.

Needed a steel plate bumper sandblasted of it's old paint, epoxy and powder coated. Called around…read moremany puget sound coating businesses and found Ken's in Tacoma. Most of the shops near my home in Seattle were asking for $350+ for the job. I spoke with a nice lady on the phone initially and was told the turnaround time would be a week, or less if I needed the job done quickly. Ken's is only open M-F and closes at 5 but they do sometimes work Saturdays if they have to. When I arrived at their facility I spoke with Allan who quoted me $250 for sandblasting, epoxy and powder. Initially he said it may take 2 weeks but may be done in a week if he can. Less than a week later Allan told me the bumper was done and ready for pick-up. The whole transaction was quick and the quality of work is really nice. They plug up all the threaded holes before coating. Finish came out with a medium texture black which looks really nice. None of the little crevices were missed. Now I'm a little hesitant to take it through the bushes because it looks so good! I'd recommend Ken's. They specialize in coating anything from auto parts to industrial/commercial pieces. Talk with Allan personally and see if he can beat the price of their competitors.

The quote from this place came in literally in 6 times more than the lowest quote and 3 times…read morehigher than the next highest quote. Take that for what you will. No amount of handwaving and slick talk will convince me that they need that much time in labor and no parts. The time it would have taken them was 8 days - everywhere else was 2-4 days. I had my car taken apart, cleaned, dried, and detailed and out back together to a very high standard for less time and money. This is just a word or warning - shop around. When they quote you without even looking through an open door, that's when you know they have too much work to give you a fair shake. Sure was a pretty building though!

The last time I wrote a review as 2018, so for me to take the time to share about my experience…read morewith Sunmark as absolutely life changing is coming from a place a true sincerity of my gratitude for their business. My car has been suffering from internal leaking, everything (floorboards, seats, etc) was perpetually damp, starting to get musky, molding and unsafe to drive in. I took my car to Sunmark and Dave couldn't have been more helpful. He was upfront, gave me a full rundown of what the plan was, gave me fair pricing, and was true to his word with the plan. He even went the extra mile and fixed a minor issue with my trunk another autoshop was going overcharge me for. I am stunned with the results. I feel like I have a brand new car. Their attention to detail is outstanding and meticulous. I am so glad I found this place. I will be sending everyone I know here. I couldn't be happier with the work they provided. Thank you so much, Dave and crew.

If there was an option of a 5 star plus that's what I would rate them…read more I worked with Viktoriya and she took the time to make sure I was getting the parts I needed and even sent me pictures of what she had to confirm they were correct. Not only where they more affordable than a few other salvage yards Viktoriya took the time to locate a company that would ship to Alaska and one item was fragile, not only did they send it, but it was packed extremely well and arrived with no damage at all. The other yards I talked to wouldn't even send it. Not even at my own risk. Solid company and will 10 out of 10 order from these guys again! Tim M. Third igloo on the left, Anchorage, AK.

I was in need for some stuff for my car, but definitely didn't want to pay an arm and a leg for…read moreparts at the dealership. I did a FB marketplace search and saw that this place has some wrecked vehicles like mine. I asked my spouse to come here with me. Make sure you bring your tools because I know I wouldn't have. Don't worry though, it does look like they let you rent the tools for a reasonable price if you didn't bring your own. Upon entering the establishment, you will need to tell the staff what type of vehicle you're looking for and they will tell you where it can be found. How cool is that? You will then proceed to checking in, in their old school bind with your name, signature and date. Anyways I found what I was looking for and then some! So I was pretty satisfied with the price, service, and what I got. I would totally recommend this place.

17 years experience. Always great service. Need 85…read morecharacters to tell the story. Could not be better.

I was introduced to American Powder Coating by Josh (Sandblaster), from Performance Coatings. Since…read morethen, he would always handle the entire blast & powder process until I recently had to haul very large pieces over to them from blasting. I've gotten to know some of the guys a bit & they've always been friendly. They're busy & their work doesn't suffer from it. Fast turnaround with fair pricing. Don't hesitate to get any powder work done by them! Included is the picture of the rack they did for us in black. Can't promise you the same, but they wrapped it up the next day after we dropped it off!