Jaime is a great guy. I would not put any weight on the one negative review, it does not match my…read moreexperience at all. He was transparent from the start, took on my random job without hesitation, and delivered exactly what he said he would. He is knowledgeable, competent, and easy to work with. I would highly recommend him to anyone I know.

I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

I had a plumbing bar that was your typical material, brass, coated with nickle or zinc etc to give…read morea stainless finish, as most plumbing finishes are. I mention this as the handle was about 0.325 inches diameter solid soft brass. It was too long and I needed it shorter. Instead of using a hack saw to cut and sand it myself, I thought to take it to a place that has things setup, the stuff in place, and he can easily cut it. I found him in the business center while I was having somee other work done by another shop. Terry charged me $60 for that 1 cut. Something anyone could have done in about 5-15 minutes, without the setup!. He said, well its hard to get everything right, bla, bla, bla , when I asked why such a high price. His answers were unfounded. Its not like he coated the brass with SS finish, lol. Years later I needed a number of large thick walled posts cut down from 12ft to a shorter length. I made sure not to bother with JayTech. I found a shop on Plummer, off of Desoto and they took these heavy steel posts about 5" in diameter and made the cuts for the same price on 3 pieces of what this guy changed me on a single, less than half inch soft metal. Clean, nice work. I am sure JayTech does decent work, but is as decent a BS ripoff. If he didn't want to do it, or he doesn't deal with cutting, etc he could have just said so, or direct me to someplace that does cut, etc. I have worked around such fabrication shops, and to this day , I wont forget what a rip-off this guy was for him to take advantage. Its not the $ per-say, its the way he went about it. He withheld any idea of what it would cost when I asked before hand, and then did the work, and wanted $60. ...lol...funny now.

My beloved three-year-old ebike suffered a stress fracture at the seat tube weld beneath the clamp…read moreand if not for Jaytech I'd still be mourning its untimely demise. Thanks to Terry T. at Jaytech she rides again. He repaired the crack and was thorough enough to notice the interior of the seat tubing was wider than at the mouth and recommended the addition of stabilizing screws to prevent future movement that would ultimately stress the new weld and break it again. The additional work and bare aluminum gives her a bit of a "Frankenbike" vibe , but I'm digging it. They're like a survivor's badges of honor.

Vidal is the best great work and a fair price!! He is my go to polisher!…read moreyou wont be disappointed.

The BEST place I've ever utilized and the most compliments I've ever received from the work this…read moreplace did on my parts (that were in terrible condition prior). Highly Highly Recommend this place for even the most difficult parts. Here's a social media post that I put on my Fb wall years ago and still post over again when it pops up in Memories - like today. Thanks again Videl!!!

Mitch came out to meet with me to discuss my 35 yr. old gutters. I liked him for the moment we…read moremet! He was very friendly, honest and professional. The day before Mitch came out, we had a tree removed, which was close to the house, and with leaves that caused the gutters to clog and finally pull away from the 2nd story fascia. I thought that the quote I received to remove the hanging gutters and replace them was fair. I authorized the work to be done that day. The crew showed-up at the appointed time, and completed the project exactly as I wanted! The entire team at Socal Sheet Metal were easy to work with, accommodating, knowledgeable, and experienced. I appreciated how easy it was to work with them to get this project completed and my house back to normal, and ready for any future weather conditions. I highly recommend Socal Sheet Metal! Very satisfied!!

This company truly stands by their work. I'm so impressed. From competitive pricing to excellent…read morefollow-through, they deliver both quality craftsmanship and outstanding customer service. After comparing multiple estimates, they were the best priced, and the finished gutters look beautiful and blend seamlessly with my home. The installation crew was kind, professional, and easy to work with. A few months later when the rainy season started, a couple of minor adjustments were needed, and they came back out promptly to take care of everything even adding the gutter extenders I purchased. That level of service really sets them apart. I wouldn't hesitate to recommend them. Thank you for your excellent customer service!

Nice old guy that does some good welding, but pricey for my budget…read more They mostly do wheel repairs but I haven't used them for that.

They are very reliable and quick. Had cracks on wheels and were able to help right there and then…read more Would def recommend

Did an amazing job! Ron came out, I explained what we wanted, he took some measurements, and sent…read moreus CAD drawings for approval. He created EXACTLY what we wanted. The crew did a great job on the install and took the time to do it right. Beautiful quality and craftsmanship.

Use this company for a quality job! Ron @ Metal innovations is an excellent design specialist and…read moretheir workmanship is outstanding.

Excellent customer service very quick response with same day service Excellent work!!! Found…read moreproblems that I was unaware of and fixed them Thank you!!!

I called last minute on a Friday afternoon and was put in the schedule for first thing Saturday. I…read moreshowed up and it was all done within a 1/2 hour and the weld was to pretty to paint!!

I needed a small entry gate to my front yard (5' opening), I reached out to quite a few companies…read moreon yelp, a few responded back with outrageously expensive quotes. When I contacted Duncan welding, I received a response very quickly. Their answers were direct and addressed my needs and they were happy to answer my questions. They provided a reasonable, and affordable quote, and one that was close to the actual, final cost. The quality of the work completely blew me away, I am so impressed. The level of craftsmanship, attention to detail, and obvious passion for the craft really shines through in this gate. Everything is level, straight, and fits perfectly. Truly a master in his craft. As a person who prefers to give business to a local, family owned company, I would absolutely recommend David, and Kelsey of Duncan welding to anybody reading this and I will be a continued customer for any future fabricating needs. Thank you guys very much.

Duncan Welding was absolutely fantastic!!! When replacing our side metal gate, they delivered…read moreexactly what they promised on time and under budget. Thanks Duncan Welding!