On time. Excellent work. Reasonable costs. This was a much better experience than taking my bike…read moreto a shop and leaving it for however long it would have been. Highly recommended. I will call again when needed (which might be soon as I am currently looking to get a 2nd bike).

Eric was great. Came early, charged a fair price, did the work quickly, and did a great job. I…read morecalled him to install a center stand and fix a botched crash guard install on my Kawasaki. Took him probably less than an hour. Not only that, he spent some time helping me learn how to use the center stand and teaching me proper motorcycle maintenance for various parts of the motorcycle. Highly recommend him if you have a Japanese bike (as he only works on those).

So i needed a new tire for my sportsbike...nothing new, i go through this about every 4months. I'm…read moreused to shopping around and finding the best prices. I know i can stay in denton and get a great deal on the tire, but the labor screws me over. I can go out of town and get a better deal, but the time/gas gets me as well. After driving by Rising Phoenix i decided to give them a call. I told them here is the price i get at other places. They were happy to beat the price! The owner, i'm assuming, was a nice guy who told me it would take less than 10minutes and he was right. Fast and friendly. Not only that, but he took me to take a look at the shop in which i talked to a tech about getting new wheel bearings. It wasn't them telling me i needed new wheel bearings, but actually showing me why i need new bearings. That counts for a lot in my book. They weren't even trying to push a product or service on me. Keep in mind this is mainly a parts/service shop. There is very very little gear. They do have a nice waiting area though! Overall i'm very happy to have saved money and my time. If they keep up the good prices i'm happy to go back there for my next tire.

I finally got the bike back, but not after having to explain to the shop how to tie up as…read moremotorcycle on a trailer so it doesn't fall over. When I got the bike back I found that there was even more damage that they didn't tell me or fix from the previous knock over- my helmet basket is permanently bent, there 3 large scratches in my paint down to the metal, and there's a big dent on the back fender. I'm not even going to begin to try to get them to fix it, so I get to pay for their mistakes, yet again. The bike came back in much worse shape than it was taken in. This was one of the worst experiences I've ever had with a business.

Manuel was very professional. Definitely using MMS again. Had him come out to swap out a tire on my…read moreR6. He showed up on time, actually scheduled to come out in less than 24 hours! This is 5 star service at your door. Doesn't get any better than this!

Manny and Mobile Moto Shop was great! I had him come out today to put two new tires on my Honda…read moreVTX. He showed up on time and was very professional. He charges less than the dealership and comes to your door to do the work. I trust Manny and will recommend Mobile Moto Shop to everyone I know.

Craig at Reed Cycleworks did a great job fixing some…read more carburetor issues on my 1990 Honda VFR 750F. He was a pleasure to do business with. He kept me up to date on the progress of the repair via texts and photos. He even delivered the bike back to me earlier than expected and at a very reasonable price. Craig was professional, friendly, obviously knowledgeable and his attention to detail was readily apparent. Reed Cycleworks will definitely be the first place I call for future motorcycle repair. I'd suggest that you do the same.

I do most of the maintenance on my bike myself as a hobby. But when the front suspension needed to…read morebe rebuilt on my V-Strom (after 47k miles!) I looked where to get this done. Called a few places and was immediately struck by Craig's attitude and knowledge on the call. I felt like this would be a more personal service by someone who works on bikes out of love for bikes. Just a few days later, the bike was done and works great! Then there are extras: he adjusted my chain, and lubricated it after suggesting that I do this more often and how. He degreased the front end from leaking fork oil. He pointed out that my rear brake needs new pads very soon (and got me pads at cost). Let me ride it a bit and then adjusted the front to my liking after rebuild. Overall, great experience for a very fair price. Definitely suggested!

The Addison Foxhole Garage is a fantastic shop to work with, you won't be disappointed. Preston…read more(owner and mechanic) is who I've worked with. He's honest, straightforward, and clearly knows his stuff. I've brought my car to him a few times now, and every single time he's been clear, truthful, and put in quality work. This last visit was no different--he told me exactly what my car needed (with zero pressure), explained everything clearly, and got it done right. You can tell he takes pride in his work, and it shows in the results. If you're looking for a shop that's reliable, trustworthy, and run by someone who actually cares about their customers, this is it. Don't waste time anywhere else.

BUYER BEWARE!! What a mistake I made choosing Addison Foxhole!…read moreThese gentlemen are both incompetent and have no idea how to work in a real business environment. I left a message about the wiring job for two DRL running lights that I had already installed on the fender of my Honda Rebel 1100 DCT. A gentleman named Preston called me and advised that his technician could do the wiring job easily. This is where I screwed up! I brought my bike to him to do the job. Big mistake on my part. On this first try, the technician named Dewan worked for 3 hours and got the wires connected but stated that he had to install a relay as the lights were not bright enough. So I had to take the bike home without the DRL lights connected. After 7 days and multiple phone calls, Mr. Preston advised me to bring the bike back to him and he could "get this job finished " BIG MISTAKE ON MY PART!! I'm in the Addison Foxhole waiting room. It's been 4 plus hours and no end in sight. His technician is not available and Mr. Preston will do the job himself WITHOUT the RELAY. - Mr. Preston is very argumentative and can't or won't tell me when he will complete the job. I'm stranded in Addison Foxhole waiting room. What an experience. I paid Addison Foxhole $159 after the first installation attempt. Addison Foxhole won't refund my money and advised me that this was his shop and he was working as fast as he could. As I said BUYER Beware!!! If the system would have let me I would have rated Addison Foxhole a zero rating if I could have.

I would give Elmer Morgan, the owner of Northside Cycle, 12 stars if I could…read more When no Denton or Corinth motorcycle shop would work on my 1325 pound, 350 in.³ Corvette powered BossHoss motorcycle, Elmer's response was "bring it over, I'll get it fixed for you." He basically rebuilt the Hoss from front tire to rear, in some cases having to make parts. The bike came out of his shop at least as good as it was new in 2003. To reassemble the rear wheel with its massive 245 mph tire, capable of putting it's almost 400 hp onto the pavement, Elmer went to 8 tire dealers until he found one who would work on it. When Elmer says he's going to get it done, he really gets it done! Elmer did extensive work on my BMW R1200 GS, on our older Honda Goldwing & on the newer P1800 trike and my Ducati. In every case his work is exactly what I wanted, at a fair price.

From the owner: Elmer Morgan is the owner/operator of Northside Cycle in Corinth, TX just minutes from I-35 North…read moreCorinth 460 exit. He has 40 years of extensive experience and has maintained / repaired Ducati, Aprilia, Moto Guzzi, MV Augusta, Cagiva, BMW, Indian, Japanese and British makes (old & new) motorcycles

These guys spent about a half hour picking thorns out of my tire before they put in a new tube…read moreCharged me a good price Very decent people, highly recommend Ps coffee shop in the same building is excellent

This review is a year too late. Kevin (owner) is just what we need more of. A talented LBS owner…read morewho knows his craft and a pleasure to be around. His place is a chill little shop near the square in Denton. Thankful he built me a sold SS mountain bike that is my go to for the trails in north Texas