Super helpful staff, lots of tools and supplies at the will-call desk. no cut fees, lots of…read moreinventory, and they are OPEN on SATURDAY! the only metal place that has Saturday hours -1/2 day. The staff doesn't act like they are doing you a favor to be there on Saturday's either. Their price is similar to the other shops, parking and location are easy to get in and out of.

I came here for the public scale for an out of state vehicle registration at the dmv. There was no…read morewait, it was affordable and the staff was kind and efficient. This is officially my go to for weighing your vehicle for the dmv.

Came in to ask about moving some fog light tabs on the other side of my bumper…read more Frank was very nice and welcoming. He listened to me about my project and quoted me a fair price. I also asked to straighten some bumper horns. Everything turned out great. He finished even before our spoken return time. Super happy with the outcome and work that was done.

All I can say is my expectations were not only met, they were far exceeded…read more 1. If you want an honest business, this is it. 2. If you want to support a family business, and not the big corporations, you've found the place. 3. If you want quality and care on your project, you get that here. 4. If you care about your hard earned money and want a fair price, it's here as well. And on top of all of this, they're personal and friendly. I highly recommend this business to anyone. 10 star business which all businesses should strive to be. Thank you so much! Vince and Stacy

I have a turbo downpipe that needed my recirculated dump tube length adjusted and cutting my…read moredownpipe in half to add a 2.5" vband before the bends. I called the shop and spoke to Joey and explained what I needed. He gave me quote over the phone and I decided to stop by. When I arrived I showed him the parts explaining what I wanted to do. Joey said he could get it done by next morning and gave me a final price, which was within quoted price over the phone so I agreed. Joey completed the work as stated and I am overall happy with the work. Will be back when I need more fab and welding done for my projects! Do note that this was labor only and I provided all parts. Pics show before and after.

Where to begin, Our family purchased our first Pop up tent…read moretrailer, a huge step up from our typical camping tent. We were excited to bring it home but noticed we couldn't get it into our driveway. The bumper was to low on the driveway and was getting stuck on the cement. I called around to all the RV stores and for some reason they all recommended ABC Welding in Anaheim. Well here comes ABC Welding to our rescue. Chuck was the nicest guy, very personalable and extremely honest, he told me to replace my hitch to a lower type hitch and that might solve my problem. He could of made a quick dollar off of me but chose not to . I replaced the hitch a week later and it still got stuck on my driveway so he suggested we add caster wheels to the lower bumper to clear the driveway so I brought it back to him and he did an amazing job! A few weeks later I brought back my trailer for a hitch attachment since he did such a great job on my caster wheels. He just didnt do a hitch attachment but a work of art, literally! He changed the spare wheel attachment point directly on to the bumper to accommodate the extra steel to placed to reinforce the bumper. It went from a 30lb. Bumper rating to well over a thousand pound gorrilla rating. This new setup can probably haul another trailer or a boat, that's how strong he built it. Again it's a thing of beauty and structurely superior to other bumper setups I've seen. I can't give enough accilades about this gentlemans skills and business practice. To simply say it, Chuck is Great!

A1 repaired my Moms iron gate, which was improperly installed, followed by 3 yes 3 prior attempts…read moreto resolve the perpetual ISSUE, our issue was the gate not aligning correctly to close. The installers put only one hinge with two screws. This large heavy gate needed far more support. Where others did not or could not figure out the best remedy, Norbert and Cecilia did! When the welder Norbert he explained each step of his plan and HIS PLAN IS BRILLIANT! We are AMAZED AND MOVING FORWARD WITH ANOTHER PROJECT, my Moms back fence.

After searching in the local area, I ended up using A1 Welding for my project and it turned out…read morevery good! It was a semi-complicated arrangement of 1x1 square tubing that formed a structure for our motion simulator. We were pleased with the outcome as well as the service and communication. It was also done in under the estimated time. I would highly recommend this company for any type of welding projects that fall in their scope of work!

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Great work and quality customer service from start to finish. Everything you need from a business.read more

These guys are the best! Professional, fast and kind. They were able to help me after so many…read morecompanies could not. Very grateful for their work and ability. Highly recommended! Thanks again, guys!

Since I been coming here September of 2020. John, daimon and Cruz in the front desk have been…read moreexceptional with customer service and just in general as human beings . They are always very welcoming from the moment I arrive. I always get the help I need and it's always done with with professionalism. Show room is always very neat and organized and well stocked. If I'm ever in need to use the bathroom facilities I can say is always very neat and clean. I will proceed to being a loyal customer to such a great company. Keep it up guys and thank you. Regards Abe

great customer service always doing an extra and trying to help for the best of us thank u…read moreJonathan and Damion

Made me do a full intake form and I had my material there for a week to find out by an email they…read moreare not a small job shop and they have a $1700 minimum. Nothing on their website or is posted. Total waste of time.

They quoted my anodizing job in a timely manner. My boss needed to get a project completed in two…read moreweeks and alumacoat responded fast. Thank you Sandra for the good service.