Fantastic, I went to JR. machining with a part that needed to be bored out and threaded. Unable to…read morefind a tap or the correct size bolt to compare threads to. Justin went in blind. I took the part and installed it on my customers boat and it fit perfectly. All I can say is Justin is a CNC wizard, one who has perfected his trade. I highly recommend JR Machining to anyone needing quality work.

I had a very small job to modify some counterweights for my telescope. They did the work quickly…read moreand for what I thought was a fair price. Excellnt work. I will use again

Good old-fashioned machine shop. These guys know what they are doing. I had an unusual part that I…read moreneeded custom machined, they fit me in to their busy schedule, and got it done.

Great service, nice people. I did not expect such fast service to a stuck pulley removal. Really…read moreappreciate the support.

John is friendly and full of information about all types of motorcycle repair whether it be German…read more, Japanese , American or Italian he's got answers. I bring my BMW in for service often and he's always done a great job at a fair price. I'd recommend Sonoma Moto to anyone looking to get work done right at a fair price. Great guy!

Very knowledgeable and honest giving quotes for services, went to inquire about repairs on a 1984…read moreYamaha Jog and was presented with a quick reply and very insightful information on how to proceed

Randy's is the BEST !!! As with many a home/shop enthusiast,…read moreI needed One Small Part modified in such a way that was impossible for me to perform in my garage-based workshop. (...I needed a lathe! ) One call to Randy's and he said "..just come on down and we'll take a look at it." He was less than a mile away, and so I did just that. Not only did Randy take care of me RIGHT AWAY, he tried letting me out of the door without charging me for drilling out my part to the right diameter..! I refused, and left him some cash on his desk, with the words, "..here - at least now you can buy your guys some beer or whatever after work! " Super friendly, extremely courteous, and highly knowledgeable, I truly recommend you go see Randy's for your minor (OR MAJOR) machining tasks. They're fully computerized, CNC stuff everywhere, and the 'sample-parts' they have out for the customers to see are simply perfect. --Art

I needed some machine work done on one of my race bikes. Called Galvin's and was asked to come on…read morein and let's see what you need. Met with Jim the owner and we discussed the best way to attack my needs. With an estimate and time to pick up the parts was done, I left. Got a call within half the time expected saying my parts were finished. Paid and left to re-assemble the bike, and everything was perfect! What can I say other than I'm really glad I went to Galvin's Machine shop. They have my business from now on. Highly recommended!

I needed a couple of tools machined for my shop to set rivets and went to Jim at Galvin Machining…read moreto have them made. These tools are used in an air hammer so needed this machine shops expertise in the type of material the tools were to be machined from. That is not what I got. Instead of using 9130 Chrome moly or similar very hard and durable material, the shop chose stainless steel and charged $360 for the two tool bits. We didn't get through the first job and the tools had bent and mushroomed in the air hammer resulting in a difficult task of removing them from the air hammer. I returned them to Jim Galvin and he dismissed my concerns stating that I told him we were using them to set aluminum buck rivets so I got what I asked for and that I somehow was at fault because I didn't ask for a more durable tool material. What? As a shop owner who was relying on the expertise of this machine shop to use their best judgment and expertise to select the correct material to machine a tool part from, what would a lay person get from this shop. The attitude I got from Jim was arrogant and dismissive for an overcharge and defective result. I purchased McDonald Douglas aircraft bit rivet setting set of 13 tools for less than $60 and the original bit I had machined at a local shop 2 years ago was $100, so to have this price sprung on me when I picked up the two tools and then get substandard material that failed and Jim's dismissive attitude was unprofessional. I will not be back and anyone who needs any machining should be cautious if you choose Galvin Machining.

The owners of this company charged me thousands of dollars for Stainless steel work but sold me…read moreregular steel. Their sub-par work is rusting all over my new concrete and staining it. All of it has to be replaced. I would never use this company for anything again.

We bought the gate kit a few years ago. We finally discovered Davis Fabrication installs gates!…read moreDaryl came over to look at the system we had. He looked at every detail and said he could do it- even though it was different than what he uses. He did the work and we are most pleased. Daryl is prompt, conscientious, and respectful, as well as his crew. I plan on hiring him again and would recommend him to everyone! Barbara

Physics-oriented hubby and I were fed up with always having to shore up the supports for our…read morehanging bird feeder pole, which had the standard design of suspending the feeder off to one side. Hubby wondered if we could find a pole where the weight of the feeder was aligned with the vertical axis of the pole. The short answer was no; no one seemed to sell such a logical design. Moreover, it was almost impossible to find someone to bend a metal rod to our specifications. An Etsy vendor strung us along for 8 m before admitting they were too busy. Local decorative iron places we called said such a small job would be prohibitively expensive. So we turned to Yelp and that is how we found Gerlinger. They are a heavy duty steel company, but came up with our Yelp search term if metal bending. Violet answered our query promptly and put us in touch with Barry and Derek who gave us a reasonable quote for the design we supplied. They did a great job, and were gracious from start to finish. It is reassuring to know that companies still exist that are willing to take on the odd small project, and who prioritize customer service. I'm sure their larger clients are similarly pleased.

Business is big with a lot of different material, great selection. That being said the material is…read moreover priced and it takes close to an hour to get a couple items loaded because they employ a ton of workers who wont do any work..... im currently waiting, its been over 45 mins, i only purchased 6 pieces of steel, and theres been no one in front of me this entire time trucks are backed up to the highway behind me.....

I hired Eric to redo a part for my x-ray machine. I was worried about hiring a non-chiropractic…read morecompany to do the fine detail work. However, Eric did a wonderful job making sure he had a clear understanding of what was needed. Customer service was excellent. Absolutely wonderful and perfect service. Quick turnaround times and the job's done perfectly! Thank you! If you ever need any materials cut and need the job done precisely and on budget, Atlas Contour is the way to go!

Eric did an amazing job making special card access reader boxes for me for a customer that needed…read moresomething special. They came out better than I hoped and right on time. I wouldn't hesitate to use them again!! Thanks again!!

Friendly, knowledgeable and honest. I took my 2005 Nissan Titan in for AC analysis and recharging…read more Price was good. Work was good and quick while I waited in a very comfortable waiting room. I was kept updated every step of the way. I'll go back to All Around Auto Repair for future needs. Thanks

These guys are amazing! Contacted them via Yelp and they replied right away and got me in same day…read more I had a very minor issue but they were so helpful and fixed my issue in a timely manner. Will for sure be back for all my auto needs!!