Could have gained a loyal customer, but with the way I was treated you lost a forever customer…read more Wasn't direct with giving me an exact estimate, and ended up charging me over double to what I agreed to. 100% do not recommend.

Stay away. They left…read moreout the o ring for the transfercase to transmission adapter causing transmission fluid to leak (all over my driveway too!). They also made me believe that my TH400 just couldn't work so I had to buy a rebuilt th350 from them that I asked to be painted black. Nope it was never painted (also I'm just not sure I believe that the th400 didn't actually work). The rear spring perches (mounts) were put on the wrong side and backwards causing the shocks to be at almost a 60° angle. That's 30° more than the ideal 90° that they're designed for. This makes the shocks basically useless as they can't properly damper at that angle. Now the spring perches must be cutt off and switched over and Welded again. This will make the shocks almost exactly 90°, how they should've been from the beginning. The front pinion is pointed up at the transfercase, when it should be on the same plane (its a non cv driveshaft) i.e. if the transfercase output it at 2° then the differential should be at 2° as well. Improper pinion angles cause the ujoints to accelerate and decelerate at different speeds which causes vibration, wears out the ujoints quicker, and can cause failure. My front axle uses 2 plates to hold the springs to the axle rather than u bolts. Well the front passenger side lower plate has a bolt head protruding lower than the plate instead of it being inset like all the others. And they Welded the bolts to the bottom plate. Why???? When they mounted the transmission it was put at a low enough angle that the distributor was hitting the firewall. This made it impossible to time the engine. Had it been mounted 3/8" higher this would not have been an issue (super easy for a nonprofessional like myself to figure out). Also the th400 had a mount for the adapter to go to the skid plate that should've been used on the th350 adapter. Instead they used the stock th350 to mount it to the skid plate, and didn't return all the pieces of the mount for the th400. I also didn't get back my stock dana 44 knuckles. I didn't get back my stock drag link. I didn't get back my stock skid plate. My an fittings for the th400 were gone so I had to buy new ones for the th350 as well. They didn't hook up the kick down cable for the th350. The linkage for the dana 300 was not reinstalled, and the hardware was missing. I have rock lights, a light bar, and fog lights which were working when I took it down there. Surprise, they are no longer working (I haven't looked into this too much yet as I've been working on other issues). Charlie did contact me, not from my email, but after my Facebook review and offered to fix some of the issues after blaming me for them. However, I don't trust his shop to do it right. Plus my time is valuable as well. Which he doesn't agree with. Do yourself a favor and stay away from OCD. unless you want to pay to do it twice! This was an expensive $10,000 mistake on my part. Could've bought another okay CJ7 for that amount... The most laughable thing (well sad that I unfortunately paid for it) was 7.5 hours to change out knuckles on a dana 44 with manual locking hubs. Something I've done numerous times that only takes me an hour to an hour and a half each side. "I don't pad my hours" Yeah right.....

Front windshield tint, worked with my schedule, in and out in about an hour. Quality workread more

I've used Performance Tinters for years. They are the only place I will take my vehicles to…read more Friendly service and they get you in and out quickly and it's always done right.

I brought my Honda Clarity in for paint correction and an 8-year ceramic coating, and Steven…read moreabsolutely killed it. The car looks WAY better than I expected -- the gloss, the reflections, everything. Silver paint is usually hard to make pop, but it legit looks like a brand-new car now. Communication was great the whole way through. He kept me updated, explained the process, and never rushed anything. They stayed late to finish the car and still delivered quality. Even the touch-up spots came out clean, and he let me know what they could and couldn't safely correct on the hood. Super honest, no BS. They also said they'll check in again in a few months for a maintenance wash, which just shows they stand behind their work. If you care about your car and want it done right, this is the place. Super easy to work with, good people, and the quality speaks for itself. Highly recommend.

Excellent detailing services by a great couple of guys. Highly recommended, 5 stars for sureread more

Roger and his staff are always so helpful! They are efficient and professional! I will always trust…read morethem with my Jeep Gladiator and recommend them above all other local shops!

Mark F. I installed…read morea pickup truck bed cover that I purchased online for my 2024 GMC Sierra. While attempting to install it, I could not get the bed cover panels to latch. I called the internet company for assistance, and they referred me to Innovative Collision and Accessories to see if they could make an adjustment on the cover to make it latch correctly. I brought the truck in and Roger and his technicians worked quickly to determine what the problem was and made the proper adjustment to the bed cover rails. They also tested everything out to make sure the cover works right. I really appreciate the professional work done on my truck and I would highly recommend this business to handle installing truck accessories. Thank you for your professional help!

Bryan did a fantastic job on my Jeep. I was told by a different shop and mechanic that I needed a…read morenew engine. After Bryan assessed the situation it was clear the previous shop did not have the skill needed to fix the problem I had. I so appreciate their skill and transparency on what needed to be fixed and getting it done in a timely manner.

After many years of my car sitting on Nick's lot. The restorations weren't done properly. This…read moreseems like a way for nick to claim restorations when it was a half hearted effort to do them right. Being charged over $30,000.00 and not having anything that was supposed to be done working properly. I took the car to another garage and had him look at the car without telling him what was supposed to be done. When he looked at it he went through several items that nick claimed were done right and he verified that they weren't done right. The second garage was totally independent in that he wasn't doing this to work on the car but a favor to me. I will now take the car to another garage that the second mechanic recommended and see how much more it is going to cost me. Long and short of it I have or had a (warranty) on the work and if I wanted to let nick continue to get the work done right, judging how long it takes when I did take the car back to him I might never drive the car again. And it still wouldn't be done properly. Nick, I think you know who I am and if you want to give me a call please do. Because this report doesn't come close to letting you know what a crappy job your garage did.

A few years ago, I researched all the products and all the vendors in the Houston area and decided…read moreupon Siramic Detail. Dustin, at Siramic Detail in Conroe, is incredibly knowledgeable, professional and friendly. I recently had Dustin work his magic on the fifth car and each time I drive away more and more impressed. I know I made the right decision back then and don't have any need to look anywhere else. Outstanding workmanship, great products and mind-blowing results are well worth the expense.

Dustin's Siramic Detail business is exceptional for several reasons. First, QUALITY. He is…read moreserious about his work and his brand's reputation. Nothing leaves his Conroe shop without meeting his exacting standards. How do I know? 1) I watched how he applied a ceramic finish to my new Ford Expedition. I brought a book and was impressed with Dustin's air conditioned and customized space designed for specialized work. 2) His former partner in a Cypress location had installed a clear bra and ceramic coating on my 2017 Tesla MS that, when Dustin saw it, he made it right gratis. Second, this speaks to to Dustin's business ethics. They are first rate. He meets commitments. I trust this guy and recommend Ceramic without reservation.

So after being told by another tint shop in town that removing my old tint would cost $225, I began…read moreto hunt another option. Nicho's had done work for me before, so I drove over. I was introduced to Benjamin by the young lady in the front who asked me how they could help. I asked him to look at the tint on the truck I had just purchased, because something didn't look right.Ben had the idea of changing out the drivers window film to see if the look changed. Lo and behold it worked, he priced me at $50 to remove the old, and $299 to replace all the tint in the truck. Thanks Ben, you have earned a customer for life.

I had them do an install on a radio that I sourced. Service was super fast, and inexpensive. I…read morewill definitely be back for all my audio needs in the futire.

Wonderfull service did a beautiful job. Thank you! Car was ready and Clean as it could be.read more

Great place to do business. I Took my car in this morning to have lower bumper reattached. Kenneth…read morewas kind enough to drive me back home - 3 miles.- and picked me up at my house after the job was done. The cost was very reasonable. And the office staff very helpful. Five stars for super service.