Had a great experience with Industrial Metal Supply. I ended up purchasing the wrong piece and even…read morethough they normally don't take returns on items like that, they made an exception for me. Everyone I dealt with was very helpful, honest, and straightforward. They took the time to explain what I actually needed and guided me in the right direction instead of just trying to make another sale. Really appreciated the customer service and the way they handled everything. I'll definitely be coming back for any future metal or material needs. Highly recommend them.

This place is so clean and organized! The remnants or off cuts section is a really good value,…read moreyou'll just have to take your time to find the right alloy and thickness. Some of the pieces have order tags so that makes it super easy, some have only the alloy printed on it, so you'd have to take calipers with you to measure the thickness. Some off cuts though had no writing on them at all, but I'm sure if you ask they'd be able to tell you by the finish and stuff.

This place have a good prices and the best costumer service!!! They do all you Need by yours…read moreproyects with sheet metal!!!

This place is busy / so they know how to crank out the pieces you need. When our swamp coolers…read moreneeded replacing, and the flashing and duct work were 40 years old and rusting out, I found this place. A few other shops in the area were boutique and not open when I went by. But I walked in here and met the owner - George. He set me up with an order for the parts I needed to replace the plenums, diverters, supports for coolers, and flashing for the holes. Took a few days to make and I installed with my roofer. The only thing that was off was some tack welds were burnt through on some flashing and the roofer pointed it out. But we coated everything well and will not be a problem. Great prices and speed. All the parts worked fine and he advised what to get perfectly.

We are so happy with the work that Rudy has done for us, he is amazing! The parts we ordered for a…read morecustom project were exactly as we needed them and very high quality. We highly recommend Laserbend's services!

Rudy helped me out and is a super nice guy. He modified a door handle for me. Thanks. I will return…read moreagain for more door handle mods.

Sam and his dad at Exotic Iron Works transformed our front perimeter into a showpiece. From the…read morefirst on-site consultation they impressed us with thoughtful design suggestions--matching the gentle curve of the street, integrating warm hardwood caps, and spacing the balusters so the planting beds still breathe. Their craftsmanship is flawless: every weld is clean, the powder-coat is even, and the wood inlays sit perfectly flush with the metal frame. Sam's father personally checked each panel for plumb and level, and the team worked long days to finish ahead of schedule without cutting corners. They left the site spotless, even hauling away the old fencing and sweeping the driveway. Beyond the technical excellence, communication was a breeze. Sam texted progress photos, confirmed small details (hinge style, post-top finials) before committing, and honored the original quote to the penny. If you want ironwork that's equal parts art and engineering--delivered by people who treat your project like their own home--hire Exotic Iron Works. The results are stunning, and the experience is just as impressive.

Can't recommend Exotic Iron Works enough! I came to them with a last minute project and they far…read moreexceeded my expectations. Sam was incredibly kind and helpful through the whole process. Really appreciate Sam and his team and will be coming back to them from here on out!

The guy seemed really confident about our request, like it was no big deal, so we agreed to let him…read moredo the work. His price was also pretty high, which somehow made us think that we would get better results. Unfortunately, the work done was really sub-par and different from what was requested, so we were forced to take a $2500 loss and start over with another shop.

From the owner: Fabrication, waterjet cutting, weldingread more

I had a very small job to do - two cuts and a bend. One of the bigger shops downtown said they…read moreMIGHT be able to do it for their minimum $75. Steve at Roscoe Sheet Metal did the job for literally a couple bucks and asked that I remember him for bigger projects. I will certainly check in with him first for my next metal fabrication needs. Now that I've found a good fabricator, I'll have to figure out where I can use more metal...

Mike is a great guy & took care my sheet metal fabrication right a way & has a great shopread more

Craig is Amazing Here . he helped me fix a job that I didn't think was going to be possible …read more Choose these guys-great Business Great Job!

Great service and very high quality of work. Very responsive. They showed up when promisedread more

we hired signature and works to install Railings and they were very professional on time. Pricing…read morewas very competitive and the quality of work is top-of-the-line with the flea recommend them to anyone looking for Iron Work.

We're very pleased. Patrick and Fernando did a terrific job. We had a rough idea of what we'd…read morewanted when we first met them, and the process of finalizing the finer details was really straightforward. The job was pretty swift, considering it was all custom. They measured carefully, and discussed potential issues with us and how we might like to work around them (mostly issues of our old house having walls not perfectly true, and of building codes having changed a lot since our former railing had been installed). All made sense and we came up with agreeable workarounds. They did initial fabrication on site, to make sure that everything fit perfectly, and then did the finishing work and painting off site. The final install was meticulously precise. The new railing is very sturdy. Photos show completed railing BEFORE we installed new finished flooring. It is bolted to the subfloor and to some reinforcement blocking that they installed under the subfloor for us, as well. Overall, we're quite happy with it. For something like this our goal had been to install a railing that will last for 50 years, and I think they met that goal for us.

Very friendly and helpful service. Had the exact aluminum…read moresheet I needed. Would highly recommend this supplier for aluminum materials.

Extremely helpful and courteous. Came by during Covid-19 pandemic and everyone was wearing masks…read more They were filling an shipping order but stopped to assist me obtain a very small piece of material. Gave me more than I requested and did not charge anything extra. They obviously put the customer first. Will always go there first for my metal needs. Steve/Glendale, CA

The owner has an absolute shameful attitude with females. He does excellent work, but is limited by…read morehis short view of women.

These guys can weld anything! I had a very unusual request to weld a small spot, difficult to get…read moreto on the passenger side of my upper control arm in my 68 Cadillac (IYKYK). And the metals on this particular part are not exactly the easiest to weld together...but they did it! And two of the nicest, most honest guys I've ever met in all my years of being in the classic car hobby! Highly recommended!