Had a great experience with Bright Ideas…read more They installed a ceiling fan for me and checked my whole home for electrical issues. Highly recommend!

Rob and his team did an amazing job installing my EV charger and updating some of my lighting…read morefixtures. They were incredibly professional, clearly knew their craft, and even went the extra mile by coming back out on a Sunday to resolve a minor issue. I really appreciate everything they did and would highly recommend them.

Five days ago, I had the maintenance service for my HVAC system done by Dennis. He did an…read moreoutstanding job as usual. It is always a pleasure to have our system serviced by him. He is always pleasant, professional and very polite. He made sure to ask if we have had any issues with our system since the last service, and whether or not they were addressed to our satisfaction. Dennis is very thorough.He checked to make sure that everything was working properly before he left, and asked if we had any questions or concerns. When he left, I felt really confident that the best job had been done, because it was obvious to me that he was genuinely concerned in doing a good job. I am giving him five stars without any hesitation whatsoever.

Ultimate air systems is excellent! Very professional, timely, and clean up was great. All the…read moreemployees that were in my home had much respect for myself and my personal property which I appreciate it so much. I would highly recommend them because they were very thorough and professional. i'm thoroughly satisfied with the system, the price and the entire system.

Everything went perfetctly! He knows his stuff. Went…read moreabove and beyond! very fair priced and comes when u need him! He loves what he does and is damn good at it! Call him!

We have been using Dave and OSA Systems in our Westfield home for over 10 years. Dave is honest,…read morefair, and reliable. He is very knowledgeable and makes practical recommendations to provide adequate protection without trying to rip you off! We recommend Dave and OSA Systems very highly for your home or business's burglar and fire alarm coverage.

Do not trust Andre. He'll cut corners and hope you don't notice…read more We hired A&H to install a complete Honeywell zoning system with matching dampers -- $2,750, paid in full. Andre measured our ducts himself, then installed a damper four inches too narrow for the main duct. Either he never checked, or he checked and installed it anyway. It took three months and his own technician to admit what was wrong. He ordered the correct part in May, told us it arrived in June, then never came back to install it. When I finally left a review, he answered within hours -- after weeks of ignoring my emails: "the review must be removed before we come back or Il just return it." Then, an hour later: "I don't even want to work for you at all... you can take a walk." Six months on, our zoning system still doesn't zone, we're paying to heat/cool two-thirds of a floor nobody is using, and the part we paid for is sitting in his shop.

I called A & H mechanical services on Saturday morning, February 21, 2026 and Andre told me that he…read morecould be out to our location in Boonton at the NJ Hi-Railers to fix our HVAC problem in about an hour. Andre showed up right on time. I explained to him what was going wrong. He diagnosed the problem and fix it and he was in and out within an hour. Andre is the owner of the company and he represented his company well I would highly recommend this company to anyone looking for HVAC repair service. His business card is taped right next-door healing system so if I'm not there some other member of the Club can call him to get him out to fix anything that we need again a big thank you to Andre and A and H mechanical service from Boonton New Jersey.

Mr. Cohen was nice enough to take two evening phone calls from me to try and talk me through…read morereplacing a blown smart light switch myself. When I found there were too many variables for a first time DIYer, he was happy to come out and do the swap himself for a very reasonable fee. Turns out, he had previously worked on our house with past owners. It pays to stay local!

Barry Cohen just last week finished all the electrical on my ceiling in my kitchen. I put in new…read moreLED lights and some pendant lights. He does excellent work and is on time and neat. Strong recommendation.

Mike came to quote me for adding a Tesla charger etc to my garage. Very rude from the get-go. I was…read morepeppered with questions, but he didn't seem to listen to the answers, came across as arrogant, and interrupted constantly. Worst of all though was that he didn't seem to have a full grasp of the relevant electrical code, despite supposedly himself being an inspector, and clearly hadn't read the Tesla charger installation manual (see attached picture). He said he would install #6 romex wire (no conduit) as he has done in many other installations. But romex wire is only rated for a 60°C temperatures (not 90°C like say THWN-2 wire). The tesla installation manual on page 5 states "If installing for maximum power, use minimum 6 AWG, 90° C-rated copper wire for conductors. NOTE: Upsize conductors if necessary" https://www.tesla.com/sites/default/files/support/charging/Gen3_WallConnector_Installation_Manual.pdf Supposedly Mike has gone through Tesla's training for installing the wall charger. I guess he wasn't listening in that class. When I pointed out the minimum #6 wire specification from the Tesla manual, he stormed off and left boiling with rage. For those that are interested, the following thread explains why #6 romex is not code compliant for a 48A continuous load like a Tesla Charger: https://forums.mikeholt.com/threads/tesla-charging-station.2561702/post-2709508 Anyone who has had the misfortune of having their tesla charger installed by mike using #6 romex would need to reduce their breaker size to 50A and set their Tesla charger to a lower 40A max charging rate to not exceed the ampacity of the #6 romex. ------- Update following Mike's reply: NEC 240.4b is irrelevant and raising this as a justification for ignoring the instructions in the Tesla Wall Charger installation manual just further highlights Mike's lack of understanding and willingness to accept and correct his mistake. 240.4b relates to the breakers (OCPD). The issue here is not the breakers, it's whether the wire connected to the breakers is rated to pass a CONTINUOUS current of 48 amps (the max charging rate of the Tesla charger). NEC 210.19 Conductors-Minimum Ampacity and Size is key here and says: "The conductor ampacity may require other correction or adjustment factors applicable to the conductor installation. a.Where a branch circuit supplies *continuous* loads or any combination of continuous and noncontinuous loads, the minimum branch-circuit conductor size shall have an allowable ampacity not less than the noncontinuous load plus *125% of the continuous load*." Perhaps Mike does not realize that a Tesla charger is treated in code as a continuous load and therefore requires a 125% adjustment factor in the current? If the continuous load is 48A, then 125% of the continuous load is 60A. By Mike's own admission below, #6 Romex is only rated for 55A, not 60A, so it's too low of a specification. Putting a 55A capable wire on a 60A breaker, doesn't magically make the wire able to handle more continuous current. Sure you can save a few bucks by installing #6 Romex instead of #6 THWN within conduit, or even #4 Romex, but doesn't meet the requirements of Tesla and it doesn't meet code. Here's NEC 210.19 for anyone interested https://www.productinfo.schneider-electric.com/na-std-ref/5c0fee4b347bdf0001de4d55/Conductor%20Ampacity%20Tables/English/Data%20Bulletin%20-%20Conductor%20Ampacity%20Tables%20(bookmap)_0000264293.ditamap/$/NEC210.19ConductorsMinimumAmpacityA-F20BBAC1

Rafael and Steve were courteous, professional and knowledgeable. Excellent work. On time and neat…read more Definitely recommend for big jobs and small.

At almost closing time Jay was very accommodating in coming by to see what was what. He was very…read morepleasant and was tenacious about resolving a small but peculiar issue. Then all good!! Would use again!

I had Charged Up install two 20 amp circuits in my garage. The difficulty was the electrical panel…read morewas on the other side of the house with a finished basement in between. I was nervous about the sheetrock/ceiling damage that might be required and assumed they would use conduit in the garage. To my great surprise they were able to install all the wiring inside the walls, with no conduit needed and minimal cutting of sheetrock, which they patched. I couldn't be happier with the job they did, exceeded my expectations and it was done at a very reasonable price as I had several quotes for the job. Would definitely use them again and have recommended them to friends.

Love Phil. Have used Reider for 25 years. Honest, reliable and a wonderful small company. You call,…read morethey come!

Reider alarm company is the best, When Phil installed our alarm in 1992 I was so pleased. As the…read moreyears have gone by, I have had no problems with my alarm system, I have a maintenance contract (including central Station) and I must say I've had no issues or concerns. If I do call with a question ( One service call since the installation) I always receive a prompt call back during business hours (thats the only time i've called) I whole hardly recommend this company.