This was my first expeiance with QMP and it was great. Mike knew exactly what I needed done and…read moreeven did a little extra. My LSX454 cam ate the bearings and block. QMP cleaned up the mess and installed new roller bearnings into the block. Communcation was great and I always was kept informed of what was going on.

Mike is a great guy, he knows his stuff as we speak he's building my LS motor so far I'm extremely…read morehappy with his suggestions his attitude and his customer support. great guy I would highly recommend them I'm a very particular person but these guys satisfies my needs great job great people great product hard to find people like this anymore. The LS MOTOR IS GOING INTO MY 55 thunderbird (red) Look for me at all the major shows and local events Im out Of Somis Ca. I'm also on Instagram Darrils hot rods

This company is the worst to deal with! I had some items encased. I received an invoice on June…read more20, 2024, which included a $35 credit card fee. Since Robert (owner) included it in the invoice with no option to pay with an alternative payment, I said OK, I will pay with my credit card and at least get points on my credit card. I made payment immediately on the June 20th. The invoice said the encasement will be mailed 10-13 days from payment. Prior to receiving the invoice, Robert told me my encasement was done, but the engraver made a mistake on the engraving and he wanted him to redo it, which I was happy with, since I was spending a lot of money on this encasement. A couple days after I made my payment, I received an email from Robert asking if I could make my payment through Zelle (I'm guessing because of less fees to the business), but not wanting to refund me any of the $35 credit card fee he charged me. I sent him a copy of my bank statement that showed I already made my payment on June 20th. I called Robert on July 1st and asked if he could send me a photo before he ships, which he did and he said it will ship out by UPS on July 2nd and should take one day for delivery. I received an email on July 2nd from UPS that the label was created and will be delivered on July 3rd. I waited all day July 3rd and no delivery. I was a little upset but understood the holiday was the next day. I figured it would ship out on July 5th with a delivery date of the 6th. July 6th came and went with no delivery. I checked UPS app and it still said only a label was created. I called Robert on Monday, July 8th and asked about the shipping of my encasement. He came up with excuses and guaranteed that my encasement will go out today. Update: I just received an email from UPS that they have received my package and should be delivered tomorrow.

From the owner: More years of experience in Lucite Embedments than anyone in the field…read more 7-10 day service as a standard Plus Shipping time. We offer badge embedments, wedding embedments, custom made Acrylic Displays, custom machine of plastic and metal parts, Vacuum Forming, Laser engraving, Custom colors of Acrylic. Overnight Embedment service available

Carlos was a very attentive owner and met my needs quickly and without fuss. Their precision…read moremachines are just what you need for a custom machining job.

Service with a smile, family run business, fast service and great prices…read more What else could you be looking for?

I had a plumbing bar that was your typical material, brass, coated with nickle or zinc etc to give…read morea stainless finish, as most plumbing finishes are. I mention this as the handle was about 0.325 inches diameter solid soft brass. It was too long and I needed it shorter. Instead of using a hack saw to cut and sand it myself, I thought to take it to a place that has things setup, the stuff in place, and he can easily cut it. I found him in the business center while I was having somee other work done by another shop. Terry charged me $60 for that 1 cut. Something anyone could have done in about 5-15 minutes, without the setup!. He said, well its hard to get everything right, bla, bla, bla , when I asked why such a high price. His answers were unfounded. Its not like he coated the brass with SS finish, lol. Years later I needed a number of large thick walled posts cut down from 12ft to a shorter length. I made sure not to bother with JayTech. I found a shop on Plummer, off of Desoto and they took these heavy steel posts about 5" in diameter and made the cuts for the same price on 3 pieces of what this guy changed me on a single, less than half inch soft metal. Clean, nice work. I am sure JayTech does decent work, but is as decent a BS ripoff. If he didn't want to do it, or he doesn't deal with cutting, etc he could have just said so, or direct me to someplace that does cut, etc. I have worked around such fabrication shops, and to this day , I wont forget what a rip-off this guy was for him to take advantage. Its not the $ per-say, its the way he went about it. He withheld any idea of what it would cost when I asked before hand, and then did the work, and wanted $60. ...lol...funny now.

My beloved three-year-old ebike suffered a stress fracture at the seat tube weld beneath the clamp…read moreand if not for Jaytech I'd still be mourning its untimely demise. Thanks to Terry T. at Jaytech she rides again. He repaired the crack and was thorough enough to notice the interior of the seat tubing was wider than at the mouth and recommended the addition of stabilizing screws to prevent future movement that would ultimately stress the new weld and break it again. The additional work and bare aluminum gives her a bit of a "Frankenbike" vibe , but I'm digging it. They're like a survivor's badges of honor.

I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

Jaime is a great guy. I would not put any weight on the one negative review, it does not match my…read moreexperience at all. He was transparent from the start, took on my random job without hesitation, and delivered exactly what he said he would. He is knowledgeable, competent, and easy to work with. I would highly recommend him to anyone I know.

Great knowledge base. Tight clearances on machine work. Good value. Fast turn around for a machine…read moreshop. Had three engine blocks machine. All was perfect as I check all the work with precision tools.

I wanted my '99 Miata Cylinder Head rebuilt and I wanted to go to the best in the business!…read more I called them up and they immediately told me that they were busy and to not call them back. What is the point of a business if not to schedule a meeting at some point!? I would have gladly rescheduled for a later date, but they didn't want that. They just wanted me to hang up. So I hung up and went to a different Engine Rebuilding Machinist who resolved my issue. Yelp reminded me to leave a review here so here is my review: Don't call Martin Davidson's unless you know them personally. They will likely answer your call and tell you to kick rocks. Here's an idea for management, hire a bigger team so that you can handle the current clients AND new callers as well. More customers = more cash for the family bruv!

I have an older Cadillac and parts from dealer are discontinued and i wanted AC Delco OEM and CQ…read morewas the only one in town i found. Highly recommend using these guys. Have been a staple in the community for decades and i see why. Same day parts and not the cheap crap at Azone etc.

Support local business owners and their small businesses! This auto parts store has been here since…read more1969, serving the local community and the many automotive shops Canoga Park is home to. We had just got our Santa Fe washed at Speedwash on Roscoe near Tompanga and realized we wanted new wipers. Yes, I suppose buying windscreen wipers AFTER the heavy rains of Winter may be futile, but I believe in Spring showers so....fingers crossed! Rather than hitting the chain auto part shops in this area, I decided to try CQ Auto Parts. I love a local spot and this one is a gem. Pretty quiet this morning, but Simon was there to greet us and inquire as to what brought us in this day. Since I couldn't remember the wiper sizes - Note to self: Note this! - he looked it up. As I found out last year, when you double check the size, one(the smaller passenger side wiper) is listed as 13" on some sites and 14" on others. We went with the 13", made our purchase, chatted a bit more with Simon about "signs o' the times", etc, then made our way out. I double checked the size we put on last year, remembering we went back and forth a couple of times with the smaller wiper, before we drove away. Simon noticed this from inside the shop and came out to lend assistance, thinking we were installing them. I showed him the wiper and mentioned how frustrating it was that the smaller wiper seems to be the challenge, but he agreed, the smaller wiper currently on the vehicle looked like a 15". So he went inside, grabbed a 15", returned, compared then exchanged the 13" wiper I had purchased. He asked if we would like him to put them on, but we declined and thanked him before departing the curb. I would definitely come back to CQ Auto Parts for my next parts purchase and I hope they're still here when I need them. Cheers! "CC"

This shop is a gem in Canoga Park…read more Andrew took on a small job drilling and re-tapping some frozen studs on a NLA Porsche wastegate, bringing this part from unusable to like new. Fast turnaround and great communication as well.

It's hard to find a place willing to take on small jobs, but Andrew handled mine quickly and did an…read moreexcellent job. Great quality work--highly recommended!