We weren't dealing with a roofing issue so much as a drainage problem. Every time it rained…read moreheavily, water would overshoot sections of the gutter system and run down the side of the building. After taking a look, they found several areas where the gutters had the wrong pitch and some downspouts weren't handling runoff properly. They replaced portions of the system and corrected the drainage layout. The difference was immediate. The next storm was basically the test and everything worked exactly as it should. No overflow, no water running down the masonry, and no surprises on the final invoice. Sometimes the smaller projects tell you just as much about a contractor as the big ones do.

Our repair shop has several exhaust openings and equipment curbs spread across the roof. Most of…read morethe leaks were concentrated around those details rather than in the open field. During replacement, the equipment was lifted in stages and each curb received new flashing. The adhesive smell was noticeable inside for part of the first afternoon. We opened the rear doors and managed, but advance warning would have helped. Walk pads were installed between the hatch and the units to protect the new PVC. The shop never fully closed, and the storage racks remained covered until the work passed inspection. The process was not effortless, but the result has been reliable.

Replacing the roof above an operating restaurant was more complicated than I initially understood…read more We have exhaust equipment, refrigeration lines, deliveries throughout the day, and almost no unused space behind the building. Completely closing for the project was not realistic. The roofer coordinated with our HVAC contractor so the equipment could be shut down and lifted in stages. The old membrane had failed beneath two curbs, and a larger area of insulation was wet than the ceiling stain suggested. Everything damp was removed before new insulation and a PVC roof were installed. Walkways were added so future service technicians have a clear route between the hatch and the equipment. One delivery blocked the rear bins for most of an afternoon, which created some frustration with the kitchen staff. We also opened an hour late the following morning while one exhaust connection was completed. Those were real inconveniences, but the restaurant never took on water and we did not lose an entire business day. The roof has handled several major storms since, and there is no longer a bucket sitting above the prep area

We chose a GAF Master Elite contractor because we wanted the full roofing system and factory-backed…read morewarranty. The estimate clearly separated required components from optional upgrades. Installation took three days, including replacement of several damaged decking areas. The warranty paperwork arrived after completion without any chasing. The roof looks clean and consistent from every side.

We contacted Royal Roofing & Siding Far Rockaway about a sewer vent pipe in our attic that had been…read moreinstalled incorrectly by the previous owners. They came out to give us an estimate and PM was friendly and easy to talk to. He explained what needed to be corrected and answered our questions, which helped us understand the work before moving forward. The crew got the vent pipe installed quickly, and the work was clean and neatly done. We appreciated how they handled the repair from the estimate through the installation. It was one of those issues left behind by the previous owners that we needed to get sorted out, so we were glad to have it taken care of.

A friend recommended me to this establishment an I was quite surprised at how fast everything got…read moredone. Simply thee best !.

The leak occurred where a newer addition met the original sloped roof, not in the middle of either…read moreroofing surface. The transition was opened, improperly layered flashing was removed, and the junction was rebuilt so water could move over each component rather than behind it. The explanation and photographs were detailed, and the repair held through the following storms. The flat roof above our recording and production space had several conditions that made the replacement more sensitive than an ordinary tear-off. The rooms below contained finished acoustic ceilings, mounted equipment, computers, and instruments that could not simply be moved out for a week. The existing roof showed open seams along the rear parapet, soft insulation around an air-conditioning curb, and multiple surface patches where a leak had previously appeared above the control room. Water also remained between two condenser lines because their old wood supports interrupted the drainage path. The contractor inspected the roof and the affected interior before developing the proposal. We were given a temporary repair option, but the limitations were explained clearly because the membrane had already begun shrinking and separating in areas unrelated to the known leak. We chose a full replacement using a white TPO membrane over tapered insulation and a high-density cover board. The scope also included temporary support of the mechanical lines, new compatible rooftop support blocks, curb flashing, parapet work, and removal of several abandoned cable penetrations. Interior protection was treated as part of the roofing project rather than something left entirely to us. Equipment that could not be relocated was covered, plastic barriers were installed above the most sensitive areas, and the crew checked the acoustic ceiling after each demolition phase. The loudest removal work was scheduled outside booked studio hours. We received the working schedule several days in advance, which allowed recording sessions to be moved without last-minute cancellations. Once the old membrane and wet insulation were removed, the structural deck was found to be sound except for a concentrated area beside the air-conditioning curb. The deteriorated section was photographed, measured, and replaced under the stated decking allowance. Tapered insulation was then installed to move water around the equipment and toward the rear drain. A cover board provided a firmer surface beneath the TPO and additional protection in areas likely to receive future maintenance traffic. The membrane was fully adhered, and its seams were heat welded. The equipment curb received new flashing with reinforced corners, while plumbing and cable penetrations were detailed using compatible components. Abandoned openings were removed and decked over instead of being left as unnecessary future failure points. Walkway pads created a defined route between the roof hatch, condenser equipment, and drain. The old wood blocks beneath the mechanical lines were replaced with supports intended for use on the completed roof. Communication throughout the project was excellent. The same project contact handled roofing questions, mechanical coordination, interior access, and schedule changes. Photographs showed the deck repair, insulation layout, completed seams, and flashing details before the equipment lines were lowered back into position. The roof was left watertight every evening, and no studio equipment had to be disconnected unexpectedly. Cleanup included the roof, interior access route, rear service area, and neighboring roof edge. The crew checked the studio ceilings after the final drainage test and removed the protective coverings only after confirming that the work was complete. Since the replacement, the control room has remained dry through several extended storms. Water no longer collects beneath the condenser lines, and maintenance technicians now have a clear route that does not require stepping across unprotected membrane. The scheduling and interior protection were just as impressive as the technical roofing work.

The vinyl siding on this three-family building had become brittle enough that individual panels…read morecracked whenever they were removed for repairs. Several sections had also faded differently because replacement panels from multiple years were mixed across the rear elevation. Water staining around two windows suggested that the problems extended beyond appearance. Once the first courses were removed, the sheathing showed localized moisture damage below both window corners. The existing housewrap had been cut short around the openings and did not direct water back over the siding. Eleven damaged plywood sheets were replaced, matching the quantity carried in the allowance. New window flashing was integrated with a continuous weather-resistive barrier before the replacement siding began. Mounting blocks were installed around lights, vents, and hose connections so those components did not rely on caulked holes through the panels. The new vinyl siding was fastened loosely enough to expand and contract without buckling. Work moved one apartment width at a time so the building was never left fully exposed. Rear balconies and the neighboring fence were protected during removal. Broken vinyl, fasteners, and insulation fragments were collected from the courtyard each afternoon. Completion photographs documented the concealed window flashing and sheathing repairs before the new siding covered them.

I am probably the annoying customer who reads every line of an estimate and asks what half the…read morewords mean. To their credit, nobody rushed me or acted irritated. They measured the roof while I was there, opened two areas to check for moisture, and showed me why another coating would not solve the problem. The replacement took four days and included removing the old material, correcting the slope near the drain, and rebuilding the hatch area. I received photos most evenings without having to request them. The dumpster pickup was late and cost us a parking space through the weekend. That part was aggravating, but it had nothing to do with the quality of the roof. The final price matched the proposal, and I understood what I was paying for.

The roof had developed widespread surface cracking, but the recurring bedroom stain appeared only…read morewhen snow melted slowly rather than during ordinary rain. Test openings found damp insulation beneath several older repair areas, indicating that the moisture had traveled farther than the visible stain suggested. The owner compared removing only the wet sections with replacing the complete roof. Because the existing modified-bitumen system was heavily patched and approaching the end of its service life, full replacement was selected. NY Roofing removed the old roof to the deck, deteriorated material around the hatch was replaced, and tapered insulation was added to improve movement toward the rear drain. A new two-ply modified-bitumen system was installed with fresh wall flashing and metal edges. Materials were lifted from the street during a restricted delivery window, while the neighboring roof and occupied rooms below received additional protection. The finished surface had a consistent slope instead of the shallow depressions that had formed around earlier patches. Following several rainstorms and one freeze-thaw cycle, the bedroom ceiling remained unchanged.

We manage a small co-op and scheduled an inspection after realizing nobody had looked at the roof…read morein years. I expected them to come back with a giant list of expensive recommendations, but that wasn't the case. They identified a few minor issues, cleaned up some drainage concerns, repaired a section of flashing, and gave us a realistic assessment of the roof's condition. It was refreshing to get practical advice instead of a sales pitch from royal roofing bronx.

Royal Renovators were honest and highly professional from the estimate to the installation. Mike…read morewas our project manager and was very attention detailed. and we got our shingle roof replaced in one day and cleaned perfectly. One of the best experiences we've had with a contractor, Highly Recommend them.

Our building contains a shared commercial kitchen used by several small food businesses. Closing…read morethe entire operation for a roof replacement was not realistic, but neither was continuing to repair leaks near the preparation and storage areas. The old flat roof had numerous patches around exhaust curbs, refrigeration lines, and plumbing vents. It had also been coated more than once, which made it difficult to see what was happening underneath. We received proposals for additional repairs, a restoration coating, and complete replacement. Moisture testing and roof openings showed that a substantial amount of insulation was already wet, particularly around two exhaust curbs and the rear drain. A coating might have improved the surface, but it would not have removed the trapped moisture. That explanation was the reason we chose replacement. Financing was arranged through a third-party lender, with approval and payment terms determined by that lender. The monthly-payment option allowed us to complete the entire roof instead of dividing the work into separate repair phases. Everything about the lending arrangement was documented separately from the construction agreement. Because the kitchen remained occupied, the replacement was divided into controlled sections. Exhaust shutdowns were scheduled between production periods, temporary coverings were installed below sensitive areas, and the loudest demolition was completed early in the day. After tear-off, deteriorated decking was found beside one curb where years of condensation and leakage had affected the substrate. We received photographs and measurements before authorizing that additional work. The new assembly included tapered polyiso insulation, a high-density cover board, PVC membrane, new curb flashing, and walk pads along the equipment-service routes. The PVC system was selected in part because of the amount of grease-producing exhaust equipment on the roof. A scheduled membrane delivery arrived a day late, and the update about it could have come sooner, but the open sections had already been secured and no interior areas were affected. At completion, the drains and seams were checked, debris was removed from the rear service area, and we received a roof plan identifying the equipment and warranty boundaries. Production continued during almost the entire project. More importantly, several intense storms have passed without a single drip in the kitchen or storage space.

A small diesel spill from our rooftop emergency generator damaged the EPDM membrane beneath the…read moreequipment. The affected rubber softened and began swelling before any interior leak appeared. This was treated as both a contamination issue and a roofing repair. The generator technician stopped the source, and a qualified cleanup company handled the fuel and contaminated materials. Roofing work began only after the area was cleared. The damaged membrane and insulation were removed to clean, unaffected boundaries. The deck did not require replacement. New insulation and compatible EPDM membrane restored the area, while a protective equipment pad and containment arrangement were added around the generator under the appropriate service scopes. The exact repaired zone was marked in the roof records. A residual odor remained near the hatch for several days, although no fuel entered the occupied rooms. We kept the access area ventilated until it cleared. Disposal documentation took longer to receive than the roof photographs. The repair remains dry, and later generator testing produced no additional spill. Correcting the equipment source before closing the roof prevented the same damage from repeating.

I was so excited upon first contact because they were…read morecourtesy. The team was so amazingly helpful. They asked in depth qualifying questions. The prices matched their work. I'd use them again.

Our building has one of those classic NYC flat roofs where every contractor over the years seemed…read moreto add another patch rather than solve the actual problem. We started getting leaks near the bulkhead and decided it was time to have somebody take a serious look at the roof. That's where Ben and Bushwick Roofing come in. The inspection ended up being much more thorough than I expected. They photographed the entire roof, walked me through areas where seams were failing, and showed how water was traveling across the surface during storms. There were several low spots that had been holding water for years and the membrane itself was clearly reaching the end of its useful life. The replacement process took several days. During the tear-off they discovered some damaged decking near the bulkhead and around a plumbing penetration that couldn't be seen during the original inspection. Everything was replaced before the new roofing system went down. The new roof drains significantly better than the old one ever did. Even after heavy rain, water clears quickly instead of sitting there for days. The difference is obvious just from looking at it.