From my experience they don't really listen to your problems or just don't care…read more I had them press rear bearings for me and when they did they seated them incorrectly, costing me over $1000 having my wheel hub replaced as well as the 2 lyndall sprocket it chewed up in the process. My fault cause I brought them the bearings apparently. when all that it needed was a rotor spacer $4 part. Not sure how with all the experience in the building that couldn't be deduced... their response was " as long as the rotors not rubbing it's fine" it wasn't anymore cause they pressed the bearings incorrectly.... Still my fault cause I supplied the bearings.... Then they put in a 1250 kit on my sportster in which every gasket leaked atleast twice and I was given some grief at the fact that I wanted a bike that didn't leak from the owner and push back. On top of that I'd been chasing a noise they refused to actually pay attention to and just gave me the run around every time I dropped it off. only to find out doing my own due diligence the bolts they removed to install the kit aren't torqued to spec. I wasn't charged for any of the additional gaskets needed however for the one job my bike saw their shop atleast 5 times that summer, not counting the time I had to re drop it off cause they didn't complete the service I requested. I originally had a better review posted but I'm still leaking oil from my base gasket on the rear cylinder and I'm having to go through my bike and make sure bolts on the drive train are actually tight and I'm constantly wondering what care was taken re building my rocker box's and the other internal parts if I have bolts on the outside loose. Shops beautiful, summers nice. Other than that my experience wasn't great and as it's known for being performance driven I expected to be taken care of much better and I shouldn't have ever even had any push back to having my bike fixed properly.

Always professional and they all have a plethora of knowledge. Quality craftsman in all they do to…read moreyour bike. I appreciate the smaller shops as they really know how to treat their customers. Quality work, good prices and keep you up on progress. They have become my go to shop for all my repairs.

Highly recommend this family auto shop! They went above and beyond to repair my car(replaced the…read morealternator & oil change),explained the work in detail, and charged a very reasonable price. You can tell they take pride in their work and truly value their customers.

From the moment you call to having my car back, it was a great experience. They were so friendly…read moreand knew what I was talking about, even if I didn't. super quick service. Unlike other guys in the service, they don't overcharge you or try to up sale anything. They are honest people who are trying to do good.

Had 303Moto do a carb job for my ZZR1200 Fall 2025. Spent a lot of money on an alleged carb clean,…read morenew carb kit and tune. He sent pictures of the carb out of the bike alright, but I had to take it back 3 times because it was spilling gas every time I tried to start it. G swore up and down there was nothing wrong with it. Tried starting it earlier this year, and it puked gas all over my garage. So, I took apart myself only to find that the carb wasn't clean-dirty bowls and clogged float vavle, there was no new carb kit as all the seals were old and brittle - and that the gas line was secured with a zip-tie!!!! Super dangerous!! I tried reaching out to G for an response - nothing but crickets! Beware of this outfit!

Went to G to get new shoes on my Softail Deuce. He did it quick and clean. A few weeks later he…read morehelped me do my brakes. It was about the same price as anywhere else (maybe a few bucks cheaper), but I'd rather support G than some dumb dealership. It's obvious he's deep into the Denver motorcycle culture. There's pics and videos of him helping at a ton of local events, as well as hosting events to teach riders how to do their own maintenance. I'm happy to suggest this dude to anyone that needs some 2 wheeled help.

I am a first time customer at 5280 V Twin. My Harley is a 1997 Softtail Custom. Harley Dan is the…read moremechanic who worked on my bike. From oil changes to a carburetor rebuild to new buttons to new tires the bike feels and sounds amazing. My left front turn signal wasn't lined up and I am the first to admit I've been riding since I was 15 years old and I've not learned how to work/repair bikes. I received an email from Harley Dan and said I could bring the bike back to align the turn signal any time! I actually aligned the signal myself. I am extremely impressed with Harley Dan and 5280 V Twin. I have found my shop of choice! Respectfully Robert

Was on a trip heading to the Black Hills and my girlfriend's 2007 Softail started cutting out and…read moredying. A friend recommended Harley Dan to us and he did not disappoint! He diagnosed the issue and gave it a fix within 30 minutes and had her back on the road.I was really impressed with his knowledge, promptness and skill. Harley Dan is solid as can be! Motorcycle shops can be sketchy and tough to deal with. Harley Dan was neither of those things. If you need service or work completed on your bike, and you are in the area,I highly recommend him for your needs.

Amazing BMW mechanic. He serviced my 2009 G650GS, did the 12k maintaence, fork seals and put on a…read morefront tire. Friendly, courteous, timely and reasonably priced. Very efficient.

Matt diagnosed an electrical glitch on my 700gs that had stumped another shop. Saved me thousands…read moreon the workaround he invented. Then caught and remedied some needed maintenance items: Brake pads, front wheel alignment. All this in a 24bhour turnaround. Competitively priced, well organized highly recommend

There are so many Harley shops in town. Every wrench that has touched a Harley feels that he is…read morequalified to open a shop. Scott Yamasaki the owner, wrench, builder, psychiatrist, advisor, comedian, etc. has been at this gig for almost 40 years (remember Custom City Cycles on Wadsworth?). He knows pans and knuckles where a lot of other shops have never seen either or both. He works on everything from the old board track racers to V-Rods. Other established high dollar shops bring work to Scott when they can't finger it out themselves. He never charges enough for the work he does and his loyal customers appreciate the deal their getting from this local legend. Ask someone who knows Harley's in Colorado and ask them about Scott Yamasaki.

I'm from Texas, don't hold it against a person. I've been riding and wrenching for a few years…read morelonger than most. But found myself dis-able and in Colorado wanting to ride again. All Old School Mechanic's, Builders and Riders pointed me to the Only Old School Builder that was recommended "Scott Yamasaki". I have only started on my build, but Scott has kept me securely patient, an on track no matter how much riding fever I have. The Integrity of the Bike & Engine is shown in his work, as well as heard through His Reputation of Past Builds. Thanks for your Time and Patient's with Me. Buddhaman Out.

I wish I could give this place 10 stars!!! Connor and Chris have been absolutely incredible! As a…read morefemale rider I hate going in to shops simply because I usually get treated like I don't know what I'm talking about. The moment I walked through their doors Chris met me with a giant smile and listened to everything I said was happening with my bike. He was very professional and polite. Gave me rough estimates and all types of brands for the parts I may have been needing. I then towed my bike in and met Conner who was also super professional and met you with a smile! He brought my bike in and did a diagnostic and then fixed the problem. Which ended up being WAY cheaper than what we all figured the problem was! Honestly what a relief! Conner could have still charged me for the original problem I would have never known, but instead he was incredibly honest and helped me out! I honestly will never bring my bike to another shop! They will be who I turn to when I can't fix the problem myself! If you need a good shop look no further, they are who you should trust your machine with! Connor and Chris from one rider to another thank you for all you have done and for the immense honesty and integrity you have held through this whole process! I have been just blown away by the both of you and can't thank you enough!

Took my 2002 Suzuki Hayabusa in and needed some work, and they have worked on my bike before. I…read moregave Connor $1,500 upfront and every time I called he told me that he was waiting on a certain part that he was having a hard time getting...I asked him if I should come get the bike and take it somewhere else and he said "no, I have all the parts, I am just waiting on the wiring harness and I will keep you updated " never heard anything back and he closed the shop!!! Now I have to take him to court!!

Bought a vtx 1300r cheap knowing it needed some work. King and Tim both did a great job taking care…read moreof me, getting bike ready for a 1200 mile trip in June. Would recommend, fair prices, great work, nice people!

Friendly, knowledgeable, full service shop. Been taking my K9 Vstrom here for service for several…read moreyears now. Always done right, always on time. The guys have always been amenable to taking time to discuss issues and solutions. They always take time to answer questions, no matter how (probably) dumb it is.

I had to wait a little longer than usual due to the Covid but that is better than taking risks. The…read moreowners are super nice people and do quality work

They replaced my tires on my triumph. And I'll definitely be back for any future motorcycle needs…read more Really fantastic customer service.

Grant was fantastic to work with. I was stuck at home and couldn't get my motorcycle to start. He…read morewas extremely helpful and patiently walked me through the process since they don't do house calls. He looked up my bike and clearly walked me through it step by step. I got my bike working within a few minutes. They didn't even charge me for this. I highly recommend giving them a call if your motorcycle is in trouble.

I love place. For my winter project I was going to rebuild my carbs on my 1986 Yamaha Fazer…read moremyself.. bad idea. I tore my bike down and couldn't get the carbs off. I took it into Front Range Cycle and dropped it off with all my parts. I thought they'd have my bike for at least a few weeks.. Grant had my carbs rebuilt and my bike completely reassembled the next day! I'll definitely be taking my bike there for all future repairs. The prices are very reasonable!! They have moved, Yelp lists their address on College Ave. They're actually east of Hwy 1 on E. Douglas Road in a blue metal building just east of CR 13.