I've been going here for a couple of years. The owner, Mike, is a cool guy. I've purchased quite…read morea few parts, helmets, gloves and other stuff here. They have a bike night the first Friday of the month. When I went down last summer I brought my bike here. They worked with the insurance and it all went without a hitch. They have an eclectic selection of bikes for sale as well.

I want to give Mike and Motorcycle Riders LLC a 5 stars a little too late but I'm sad to report he…read moreis no longer in business here....hence me being on yelp looking for a new shop

A buddy of mine told me about this place. So when it was time to get new tires on my Harley, I…read moredecided to go down and talk to them. I spoke with a really nice girl at the front and she was super helpful. I also spoke with one of the other guys that worked there when I had came back to actually drop the bike off and they were both really cool. They answered all my questions and they were just cool to talk to. They did a great job on my bike and gave me the best deal that they could. When it's time for tires again, I will definitely be back.

1 star because I cannot give zero! A coworker wanted to test ride my Harley and he went full…read morethrottle into a parked car's fender. It bent the forks and more. 2 Wheel had my bike 3 times over the span of 14 months. They gave it back to me without replacing the rotor and caliper which was in the scope of the work. I took it back to them when I realized it which was immediately. They gave it back with that taken care of but my drive belt was hitting the chrome swing arm drive belt cover. It is gnawing off the edge of my belt. I took it back to them and had to pay another $780 dollars, $110 for the rubber mount engine vibration dampener which put my engine and arm back into a normal position and $670 dollars in labor including what was already paid. I took it back again for backordered parts. Now that I have it back, the drive belt was not changed nor tensioned to spec. It's extremely loose. They missed putting back wire harness bolts all over the place. When I finally got it home after the third time, as soon as I pulled up to my house the check engine light was on so I called them. They said a note was in their system about it and if the light came on again, the O2 sensors would need to he replaced. This didn't make sense to me so I pulled the seat and battery cover and had a look for myself and found they didn't connect the male and female ends fully. Once I did that the engine light issue was taken care of but I noticed they also did not hook up my FP3 Tuner. It was rattling around inside the battery cover. At this point I am furious wirh them. Now that I have had the bike back for a few weeks, I am noticing that they did nothing with the front tire or rim. I'm getting feedback from the road while riding that either the tire egged on impact or the rim buckled and it is not noticeable to the naked eye. 2 Wheel was referred by my friend and former neighbor and they had good reviews. I did not notice they mostly work on foreign racing bikes. I am now having my friend Paul at Charm City Choppers take a look at the tire and rim, belt tension, alignment and to go over the bike to check for possible errors. 2 Wheel Precision is two minutes from my home. Charm City Choppers is about 35 minutes from my home and I must take the tunnel and tolls. I am never taking my bike to 2 Wheel Performance again. Oh...and throughout this ordeal, Jennifer acted mad at me because I caught all these issues. Don't take your Harley or Domestic bikes there. Please trust me! You'll regret it!

This is going to be long because I want to be fair and detailed. I went in to have a few things…read moredone on my '07 Ducati S4RS and it took an excessive amount of time by anyones standards. Especially considering that Brian(Kundratic) was taking in other bikes and completing jobs on them while I was still waiting around. This was a project I had been planning for a year and I was pretty patient, but 4 months for a paint job, powder coat, ruined fender, and rear sprocket/frame slider install is ridiculous. It wouldn't have been so bad if I had not seen other bikes getting done while I waited and if Brian didn't have such a terrible attitude towards getting anything done on time and getting good workout out of his paint subcontractor. For the $5k I spent here I had to go somewhere else to have some of their work corrected. I'll explain my experience with each of the things I had done below. Paint job: Paint job seemed pretty pricey @ $2,200 for tank and front/rear fender. (2 colors, 2 black numbers, and some pinstriping on a sportbike. Also had 2 decals put on the gas tank) Paint came back wrong TWICE. First time there was red that bled under a pinstripe into a white field, second was bubbles under a decal. The bubbles could have been there when the paint work came back the first time but Im not sure. Either way 2 issues that the painter should have caught before returning the work. Brian doesn't do the paint work himself and he sent it back the first time. It came back a month later with bubbles under one of the decals, the one on the other side of the gas tank looked fine but I was told by Brian's painter up in PA (skip something) "we don't warranty decals provided by the customer". My question is if you see an issue why wouldn't you tell me so I can get new decals to you instead of producing a shit product and blaming the customer? Through all this back and forth Brian was more concerned about Skip being upset than with me getting a good paint job. I had to go to another painter to fix this a-hole painters work. (He deserves that description based on my email conversations with him) Rear fender: This will be hard to explain without pictures but suffice it to say this could have been done MUCH better. I had a rear fender for a Ducati sport classic 1000 that I wanted to have cut to fit snugly around the tail end of the seat the way the S4RS OEM rear fender does. I could have done this myself but figured why not have Kundratic do it as they are doing everything else. Brian ended up making the cut too wide and left a .5" gap between the seat and the fender. When I asked him about it he just said "I can fix it, its just time" explaining that he could fill in the gaps with fiberglass but he would charge me for the time. If he hadnt messed up the template and cut it too wide in the first place it wouldnt need to be fixed!! Powder coat: I needed to have each side of the engine cases powder coated black which obviously required removing them and replacing the seals and gaskets when the powder coated pieces were reinstalled. Instead of ordering the parts himself, I had to order them from Pete's Cycle. (The other shops I went to for repairs said they would have ordered the parts themselves as that is part of their service) the powdercoat job was fine and the reinstall was done well. But the attitude in getting the work done and the speed at which it went sucked NET NET: I had to dispute several charges with my credit card company over 2 months to cover the cost of paint repair and to get compensation for the ruined fender. For a bad attitude, slow work, and no concern as to whether not the customer is treated right, or to turn a dream project into a nightmare, go to Kundratic Kustoms!

Called and was flatly told they couldn't service my bike because it wasn't a Harley. Sorry for…read moreinconveniencing you.

My husband and I went in 5/27/14 to look around at some bikes. We went in and was immediately…read moregreeted and shown around. The owner and his wife were knowledgable and respectful. They weren't trying to sell us on everything or hovering as we looked over the different options. When it came to purchasing the bike we chose the owner worked with us on price. After purchase the wife made us a great deal on a helmet! Altogether we saved $1080.00 on our purchase of motorcycle and helmet and are unbelievably satisfied with the experience and his new Harley Davidson!! Thank you so much!! - The Gerrians

I was there opening day. John is a wealth of knowledge on motorcycles. If I hadn't moved to…read moreFlorida, I'd still be a customer. He is an honest, no bullshit kind of guy. He's out to keep customers not run them away. So take what he says as gospel. Kind of miss, not hanging out there.!!!

Bob's Motorcycles feels like family. I had a wonderful experience buying my new BMW F800GS, thanks…read moreto Yale at Bob's Motorcycles. It all started when a friend encouraged me to take a BMW Rider Academy class in South Carolina that Bob's organized and sponsored--getting my friends and me discounts on the class and sending Yale and Amy to represent Bob's there. I wanted to buy an adventure bike after the course, and when I texted Yale on a Saturday night after hours, he surprised me by responding immediately. We ended up talking for over 30 minutes about my riding goals and hopes & dreams, all after work hours! I went into Bob's several days later, and Yale started out by giving me a tour and introducing me to everyone. Much to my surprise, they all already knew who I was, knew I'd be coming, knew I'd been at the course in South Carolina... it just really felt like home... like family. And what's more, because I had told Yale on the phone that my primary concern was seat height, he had already researched seat heights on multiple makes and models (not just BMWs or Ducatis) for me. Over the course of my purchasing experience, I got to know multiple people at Bob's - Yale, Amy, Jim, Lorrie... I could have purchased this bike at any number of dealers... I chose Bob's because I felt like I was home. So the bottom line is that if you want an experience that makes you feel like you're home among family... just call Yale at Bob's Motorcycles for your next new or used bike purchase or trade-in.

Before bringing my Ducati 1260s to Bob's Ducati, it ran perfectly. I transported it in the back of…read moremy Silverado to have new tires installed, and while I was there, they also recommended an oil change. After getting the bike home, I immediately noticed major issues -- it now runs terribly, stalls frequently, and the ride is no longer smooth. This was not the case before I brought it in. While I'd like to believe this wasn't intentional, it's hard to ignore the timing. The staff seemed friendly and provided decent customer service, but that doesn't change the fact that my bike went from working perfectly to running poorly right after their service. I will be contacting Ducati Corporation to file a formal complaint. If my concerns are validated, I will have nothing positive to say about Bob's Ducati going forward.

Certainly not the cheapest, but you get what you pay for in service. Gone there twice now out of…read moreconvenience and was priced incorrectly the first time and literally would have paid twice the amount I was told by one guy after I asked 3 time if that was the amount. He "accidentally" left out labor costs. Dan took off some money for w/e but I still paid around $1850+ instead of $980+ (original amount quoted and the only reason I ageed to fix or else I would've sold my bike). Dan is a great guy/salesman... the service is great... and other than the first quoted price, I still trusted them enough to go back a second time. Kind of a backhanded compliment, but it's only the truth. Thanks ECMS that was the correct price.

Purchased a dirt bike from this location. The sales representative, Cayle, was extremely…read moreknowledgeable about the bike and walked me through the entire process. It was shared with me that the COO would come with the bike. This is where Dave came into the picture. Right, Wrong, or Indifferent, Dave has a huge ego/chip that comes across extremely disrespectful from a customer standpoint. I stated if the bike doesn't have a COO, I will bring the bike back for a refund. Dave's response, 'Well bring it back". Two minute later Cayle calls me back and stated he will get the COO. Approximately 10 days later, the dealership obtained the COO and processed the bike in a manner it should have been from the start. Cayle was great!!! Dave on the other hand is the reason for this rating. If this dealership has the only part in the world for my bike, I would park the bike or sell it for part, before I go back in there. 100% because of Dave's ego and disrespectful manner. Thank you Cayle for what you did, and my opinion/rating doesn't reflect you what so ever. Looking through the reviews, I am sure that there will be a response, "there are two sides to every story" to cover up for ownership and accountability for Dave's actions. JT Motor Sports is a not out of the way what so ever and they will not disappoint or disrespect you.

The lady there is super nice and they had a perfect selection of gear. Very knowledgable and…read moreprobobally saved my noggin by giving me a properly sized helmet. Would highly recommend

Mom and Pop shop. Worked with Manuel to purchase and finance a new motorcycle at a rate I was very…read morehappy with (my 4th motorcycle). Realized it was a small business owned by family so I wanted to support them by buying new gear, which they ordered at a discount -- thanks Jenny. Very nice team. Did not use high pressure sales tactics which was a relief. I highly recommend this shop as opposed to chains in the NCR area.

Great guys and reliable as well. Good people too boot!!…read more They are true enthusiasts and I appreciate they always taking care of me.

He fixed my bike once after an accident with a deer and once after a terrible storm blew my bike…read moreover. He also added some after market exhaust and cleaned up my back end!! Great shop good guys customer service is on point!!