Found this company while searching for a local machine shop...I met with Vartan and he was very…read morewelcoming...I showed him what I was looking for and listened to his professional ideas of what he thought would work well for me...after discussing ideas back and forth he gave me a tour of their facilities and I was beyond impressed...they have a super clean and professional shop (not what I'm used to seeing in this industry)...I ended up ordering some basic parts from Vartan and was so impressed but what they produced I shared their info with some other co workers...I just placed another order with Vartan for nearly 1,700 parts...I trust this company and would highly recommend using them for any machined needs...I look forward to our future work together

Great company. They are fast and easy to work with to get any kind of machining done. From a…read moreprototype, to mass production, the team at RJ Enterprises can get it done!

DONT COME HERE!! This business operates on bait and switch tactics. Plus horrible customer service…read more Will be reporting to BBB. My boyfriend called them to get a quote and bring in 2 axle shafts to be cut and and bearings moved 1/4 inch. THEY DAMAGED THE BEARINGS AND DID NOT EVEN REPLACE THEM. They told him it would be done same day. It was not. When he called in the evening to ask if they were ready they told him maybe tomorrow. But was literally told "oh well what are you gonna do about it now" rude and unprofessional. Originally was quoted $100 a shaft (brought in 2) When my boyfriend picked it up he proceeded to charge him $150 per piece!!! My boyfriend told him that's not what he quoted and this man just said he didn't know he was supposed to cut, hello? You were told that yesterday when you gave the quote. Total switch up. Unprofessional. We're told same day it would be done and now the up charge!! Plus the nasty attitude. And on top of that, damaged the bearings and did not take accountability for it!!!

very bad job on my cylinder heads,, very shady,, cost me more money.. I don't think it run by…read moreoriginal owner because they used to be real good... I didn't think to look until I was ready to install them,, that's when I noticed one of the heads had camshaft lifted off the towers... they had the head for three weeks & this is what they did... I'm not even going to try & go back,, I can tell it would be more of a disappointment... they had even incr the price when I went to get them after they gave me the price over the phone when they told me they were done,,, with no additional work... Bad place to go for cylinder head work,, I don't know about anything else,, but I'm giving the heads up your taking a chance going here

Been coming here for years.. johny is your man when it comes to performance he young but was…read morethought by oldschool mechanics has done 2 of my blocks and 2 heads and are running strong highly recommend this place ..

I haven't needed any machine work in close to 40 years, so I had to search to find a machine shop…read more My buddy found this place and called for a price, which seemed pretty fair. We tried calling a few others. but none of them answered. THE GOOD: This is an old school machine shop that works on more than cylinder heads. Two brothers own the shop and one of the owners son, Johnny, is awesome, very communicative and a really nice guy! The prices they charge "seem" to be very reasonable (I have nothing to base this on). THE BAD: This is an old school machine shop that works on more than cylinder heads. 1. They are VERY old school, to the point that their system for tracking "what parts belong to who" consists of your name & number scribbled on the back of a business card that is stuck into an opening in whatever part you dropped off, nothing else. 2. Out of the 6 guys that work there, only one, Johnny, speaks English. 3. The phone rarely gets answered. 4. It looks more like a scrap yard than a machine shop: (literally) tons of cylinder heads, engine blocks, crankshafts and camshafts, etc everywhere! THE REALLY BAD (in my case): They called me about 11 am to say my heads were ready to be picked up. As I was busy, I didn't get there until around 4 pm. I walked in, speak to Johnny and let him know I was here to pick up my small block Ford heads. He looks... and looks... talks to another guy there... and looks, then makes a phone call. He then tells me, "a guy was here about 10 minutes ago looking for some small block Ford heads and they gave him your heads and he will be back in about 10 minutes". WTF?!? It was more like 20 mins, but FORTUNATELY this guy pulls up with my heads in the back of his truck. Johnny did apologize a few times about the confusion. I comment on how disorganized they are and he apologizes again. I pay my $240 (no courtesy discount), I thank Johnny and leave. THE VERDICT: Obviously their error was corrected after the guy who had my parts returned them. I'm hoping my experience is a very rare occurrence and no one else has to go through this. Otherwise my cylinder heads were machined as I asked.

The headers I custom ordered fit perfectly and they arrived in the amount of time promised. Their…read moreprices are very reasonable for the quality of product I received. I would definitely do business with them in the future.

Needed an annual rebuild on our comp drag racing motor…read more A few weeks later, we were told our drag racing motor did not work, nor could it ever work. Curiously, it went 202mph in Vegas. The motor was parked in the same place we left it. Save your money and hassle. Eric NRHA - A/DA.

This hone shop is ran by Dana. He's been in the honing business for over 50 years…read more There isn't much he can hone or figure out how to do the job. The shop is very fair as to prices and getting the job done. If your looking for a hone shop this is the one you need to use to get the job done.

This honing company is NOT closed. It is very alive and very well. These are perfectionists who are…read moreskilled beyond what you'd expect. I have to say I've been to the shop, which is hard to find, but once you know where to go, you'll be glad you did. For anything honing ... it's Darc all the way! Got a problem, well, they can either figure it out or send you to the right place.

One of the best machine shops in the southbay. Very honest and hardworking people. Quality work,…read morefast delivery and good pricing.

From the owner: At Machine Dynamics we specialize in machining for the Aerospace and Defense industries. Our…read moreelectronics enclosures are used on the International Space Station, in satellites and as "black boxes" in fighter aircraft including the new F-35 Strike Fighter.

Had a 383 Chevy rotating assy. Balanced and learned a few things from Tony about what was necessary…read moreto make sure it was done correctly.

They do ok work. By that I mean if your hardware is bad they won't replace it, when they do wiring…read morethey do not solder and shrink tube. For what they charge. This it a standard. Maybe I was just frowned upon because my unit is not painted but non the less not happy with my service and I do not recommend them to anyone. Unless they lower the shop rate. I hope they see this and up their game because I've seen the same work at much cheaper places. I'd take pics of my collector but naw, I put new hardware because the old stuff was trashhh, I took pics of the choke wire they "re did" I'll be removing that to solder and shrink tube. This is a mudding truck so I need my stuff on point. Thanks for the over priced work!!

I recently worked with Plastics Depot on a custom fabrication project to build a removable platform…read morestep for my spa to improve safe entry and exit. What stood out most was their willingness to collaborate. They didn't just follow my initial design--they pointed out potential issues and suggested practical improvements that led to a better final product. They were communicative, thoughtful, and focused on getting it right...and not just done. I really appreciated their honesty and problem-solving approach. i highly recommend Plastics Depot if you're looking for a team that will work with you to develop a solid, well-thought-out solution.

Here's the deal: if you are a creative type and come up with ideas of your own, and need to have…read moreready, access to different and interesting materials with which two, try your ideas out, you must know the plastic depot! This place needs to definitely be on a list of places you have as a resource. Michael's and Joannes are often not gonna cut it for some basic materials plastic Depot will definitely have your back when it comes to that, and I always go to their bargain section with pieces of loose site and plastic from left over products or projects from other customers. It's great! Nuff said!

Found this local shop and got options for my project fast. Finished product was turned over ahead…read moreof schedule and on top ,delivered. Great business I came across .

From the owner: M&B is a great machine shop that specializes in CNC turning and CNC milling…read more We machine simple and complex parts with various types of materials. Aluminum, Steel, Stainless and more. Choose us on your next machining needs.

Wilson and his team are great! A couple years ago, he completely fixed my engine which had been…read moregiving me issues for years. He was very upfront and there were no "surprise" charges. An added touch was when the work was done he showed me a bunch of the parts he changed and explained why he did so. I'm no mechanic, but I still appreciated him taking the time to do so. I've gone back to him twice since, including today, and every time he's been exceptional. I initially got recommended to him from my long time mechanics who couldn't do the required heavy duty engine work. Looking for a great, highly skilled mechanic? Wilson is your man!

I don't normally write reviews, but If you're looking for reliable engine rebuilding services, I…read morewholeheartedly recommend One Stop Engine Rebuilders. Their professionalism, attention to detail, and commitment to customer satisfaction truly set them apart from the competition. My relationship began with Wilson (owner) when I dropped off a Toyota Cressida 3.0L6 DOHC 16V Engine for a complete engine rebuild. He completed the engine in short order. So I picked it up and reinstalled it into my customer's car. After making routine adjustments and road testing, the engine ran perfectly. However, I did detect a very faint metallic sound emitting from the engine. Thinking it might be a lifter that might possibly quieten down after the engine was broken in. I shared my thoughts with my customer and suggested that they drive the car 500 mile, then return it to me. At that point, I would change the oil and reassess the health of the engine. 529 miles later, my customer returned the car to me, and the noise was still there. In fact, it had gotten worse. I alerted Wilson and he instructed me to bring the car back to him so he could check it out. I left the car at his shop, but he could not readily detect the source of the noise. So, he ultimately removed the engine from the car, totally dismantled it, inspecting and measuring all the internal components. Still, he found nothing out of specs. Obviously puzzled, and determined, he decided to start all over again, from scratch. The Toyota 3.0L DOHC 16V Engine is obsolete and hard to find. But after an extensive search for another "Rebuildable" Engine Block and Head, Wilson eventually found the cores that he needed to complete the project. He finally finished second the engine rebuild and reinstalled it a few weeks ago. When I went to pick the car up, he handed me an invoice with "UNDER WARRANTY" written across the page. He did not charge one additional dime for the nightmare in which he endured with this vehicle. Wilson is a class act! Not only is he honest, but he also has integrity - old school integrity! S. Sanders Positive Image Automotive P.S. My customer just reached the 300-mile mark and is happy as a Lark! Thanks Wilson! You are a true gentleman.