My 2019 Forest River travel trailer developed a crack in the frame where the axle bracket is welded…read moreto the frame. I spent several months going through inspections with their authorized service center and had to wait while Forest River and the frame manufacturer developed a repair plan. In the end, the service center was unable to do the repair and my alternatives were to either drive my trailer to their plant in Indiana or find a local welder. Jeff at Furrion has great reviews and a friend also recommended him. He developed a plan similar to Forest Rivers' and repaired the cracks (he found a crack starting on the opposite axle weld as well) and welded 30 x 4-1/2 inch 1/4 inch plates on both sides of the frame, as well as some 2 x 2 angle iron to reinforce the frame both in front of and behind the axle welds. I am extremely happy with the results of the repair and will not hesitate to have Jeff do any future repairs or fabrication I might need. Forest River has also stepped up and agreed to reimburse me the cost of the repair as it met their plan specifications. I would add that another RV repair shop that does perform welding services refused to even attempt this job. Thanks again Jeff!

This review is strictly for the communication I had with Jeff based on my inquiry through Yelp…read moreabout getting some metal work done. Although Jeff didn't have the capability of doing the work I'd requested, his responses were very prompt, friendly, thorough, and VERY helpful! Jeff was able to give me some suggestions for places to check with, and I'd never have thought of doing that were it nor for his suggestion. If you need any metal work done, I'd recommend checking with Furion Fabrication.

They were very nice, however the additional reviews should specify that "open to small jobs" still…read morerequires a minimum spend. Unfortunate that I am not able to find a professional welder to help with a small job in the city of reuse, recycle, and repurpose. Back to the drawing board I go.

I had a very small job which I was worried about finding someone to help me remedy…read more I made a blind call to this organization and was greeted with a very gracious invite to bring the piece over and they would see what they would do. Upon arrival the Joe, the wonderful lady I spoke with on the phone, came out to meet me and introduced me to their foreman who took the work and did, what I asked, in about 20 minutes, wow. I did not estimate that there was more that needed to be adjusted and had to take it back and again they did the work. I can't tell you how nice it is to have people who are willing to help the locals. Fan forever.

Dustin is your guy!…read more I own 2 fitness studios here in town and one of my ballet barres was broken. He came i the same day, gave me a quote and then met me early the next morning to fix. His customer service is amazing, his work turned out great, and I will no doubt continue to use him for my business's. Also, he's super funny and has a great energy. A bonus!

FLO FAB EXTREMELY Accommodating, really great customer service! IF YOU HAVE A PROJECT OR ANY WORK…read moreWELDED Dustin is A PRO! He is also a lifesaver. He didn't charge me full price knowing i had gotten ripped off somewhere else, FAB Flo helped me out on a Friday afterhours with just a phone message, he contacted me within 5 min! Then agreed to do it that day... A friday night. He completed the project in a very very short time! It was done very well this time by Fo Fab! after having been done by another welder and paid for a very crappy job, it turned out crooked not even square. So Flo Fab really came through. AND did it for a reasonable price even though it could have cost me in the hundreds somewhere else!

I needed a secure weld to a critical car part that was accomplished the same day of contact. The…read moreweld was solid and precise. The charge was minimal and the results couldn't be better.

These folks are great to work with! Very responsive and communicative, and their work is top-notch…read moreand reasonably priced. I've had them cut aeration/drainage holes in stainless steel barrels I use as pest-proof composting bins, and they now work splendidly.

I had some automotive parts powder coated, and everything turned out better than expected. They are…read morevery professional and do excellent work.

I worked with Parks on powder coating a couple sand rail cages for my UTV's. Parks worked with me…read moreon selecting the product that would best suite my needs. The color I chose was in stock and after dropping the cages off I was contacted the next day to inform me they were done. I have to say they turned out better then I hoped. And if you knew me that's saying a lot. To sum it up Parks did a superior job at a very good price and the delivery was fantastic. Thanks Guys. Russ

Ryan did a great job on a welding project I had. He bid the job and time it would take and came…read morethrough. Great work ethic. You definitely should use him for your next project.

From the owner: We provide quality products at affordable prices while earning trust and building relationshipread more

I needed some welding done. Not a lot of welding, just a few inches, but involving dissimilar…read moremetals and some tired old work (repair on repair) as well. Madden and his guys understood exactly what I was trying to achieve, (restoring an abused metal sculpture by a recognized local artist), out performed my request and followed up to see that it all went well. That's customer service. My job wasn't a money maker for them, in fact, it likely cost them to do it, but they took it on and I am absolutely delighted they did.

I needed a garden tool made and found Madden Fabrication online. They had such a high rating, so I…read moredecided to choose them. I worked with the shop foreman, Ethan Soelberg and he was very helpful and did a wonderful job. He also suggested some design changes that were very helpful and it was completed by the next day. Heather, who is in the office was also very friendly and professional. They are a local, family owned business and I would highly recommend them if you are in need of metal fabrication. Thanks again to Madden Fabrication! Linda M.

Willy is awesome! I was wanting a firewood holder and a few arbors for my backyard. I gave him an…read moreidea of what I was wanting. He drew up some plans plans and they were perfect for what I was wanting. The finished products are great, I am very pleased with the work he did.

Willy has done multiple projects for our company. He does a great job and has an innovative mind…read more I highly recommend him.

Tim and his crew did a fabulous job restoring our neglected decks! They even went above and beyond…read moreby sanding the decks when they didn't come out as great as he had hoped, and he didn't even charge me extra for this. They were easy to work with and communicated well. No complaints here!

This one is hard to rate for me. I contacted him and he was very quick to respond back and make an…read moreappointment to come and look at my kitchen as that is what I wanted to have remodeled he said he would have a general quote and an idea drawn up for me by Friday and sent to my email. I really enjoyed talking with him as did my mother-in-law. And then I never heard anything back from him. I figured he was busy so I gave him a couple weeks. A couple weeks turned into over a month because life happens and I recently sent him an email asking him if he was still interested or what happened or if he had anything for me from our meeting I don't know what happened but communication went to nothing and I feel like I was ghosted after our first meeting, which sucks because I was really excited with all the ideas that he had given me for a remodel of my kitchen that is not incredibly user-friendly at the moment.