Jon was very responsible and conscientious. He fabricated and installed some fence sections to…read morematch existing fence at our HOA pool. He was also responsive to our schedule requests t

I requested two different gates to be built. He came out looked at my property and measured. He…read moretold me he would send me a written quote which he did, with the cost the timeframe and expectations. I informed him that I would not be home at the time he chose for installation, he said that would be no problem. But the install date came and no gates . I waited thirty days past install date and was told another month the gates would be finished. Numerous excuses and delays. Finally he showed up to install the very large and heavy gates alone. Being it was late in the afternoon he dropped off the gates and said he would return the next day. We noticed on one of the gates it was a foot too short also numerous areas that had damage. We took photos and sent them along with our concerns to him. His response was very angry and unprofessional , that's all I have to say about it. He came to our home the next day and took the gates and never returned to finish the job . So i even tried reaching out to have the job completed and was told no not interested too busy. So I would not recommend this business sorr

I walked into George's shop with some heads, we've never met and he was more than happy to help me…read more I brought heads from a 66 toronado for machining and valve seals because I couldn't figure out why it smoked so much. As soon as George saw the heads he told me the wrong valve seals were on from the previous owner. He fixed it in 3 days for a very affordable price and now I can get started on getting this project on the road. I'll be taking heads from other projects I have, I'll be sending my friends to him, and I suggest everyone reading this to go to George. Thanks George!

I've been coming to this machine shop for the past five to six years. George is the most…read moreprecessional machine shop I've ever dealt with. To date I have taken him 4-5 vehicle heads. 1974 Plymouth Valiant slant 6 (heavy as hell) got head shaved down for better compression, hardened seats, and a valve job. This was a great idea the car is still running great by the way. The second was a 1995 GMC Sonoma 4.3L TBI V6 two heads cleaned leveled and valve job. The third was a 2003 Mazda protege 2.0L I4 head cleansed leveled and valve job. Forth 2000 GMC Jimmy 4.3L Vortec V6 cleaned heads level valve job. So I will never go anywhere else. Also FYI they also rebuild engines so this means that is you need your crankshaft turned or engine kits or replacement parts like cranks call them first. I'm telling you they are the first number you should ever think of. Check em out

Larry's is amazing, Jimmy Anderson is the most knowledgeable guy I have ever met especially for…read moreTwin Turbo's as well as all rigging especially Hi Horsepower VDrives He actually built my boat for Hallett back in 1988 and was the lead guy for Hallett VDrives doing all the rigging and with precise attention to all details and degrees. I highly recommend them for Boats in particular

Unless your going to be spending $50000 on a engine here, don't bother. The owner acted like he had…read morebetter things to do, and did not listen to a word I said. Took 2 months for a estimate and then he said I owed him $800 just to tear down a motor. I was a little shocked. When I dropped off he said nothing of the sort or that it would be that much. little steep for just a estimate.

I asked Dwayne from STL to build me a Hybrid BBQ/Santa Maria grill. You see I wanted to be able to…read morenot only raise and lower the grill but I also wanted to be able to spin the Grill. What I received was amazing and it exceeded all of my expectations. I am now having a custom hood built for this same grill. Thanks Dwayne and crew.

I wanted a spiral stair to my roof/balcony, it turned out really well and looks great. The price…read morewas very competitive, and with patience on myside, it was completed in time.

Keeping this brief... Left my car there all day for what…read moreshould have been 2 minor repairs. Instead I got a laundry list amounting to $2200 dollars of "recommended preventative maintenance", and excuses on why they couldn't make the repairs - both of which weren't complicated. Took my car to a small shop and both fixes were done without a phone call or text message saying "we can't figure this out." Primarily Japanese Auto should change their name to Primarily Can't Fix Anything. Total 100% rip off, unless you're fine getting your time and money wasted. Two stars because the service member seemed mildly apologetic.

We were very impressed with this place. Jacob was our go-to person and even called Enterprise to…read morelower our rate because repairs were taking so long. Bought the car in Cleveland and it had bad rust damage. I feel confident driving my car again after Primarily Japanese gave it a thorough check out. Owner, Joe, took it for final test drive and even to the car wash. Highly recommend these folks!!!

Had a fantastic experience at Becksted. My wife and I bought some vintage barstool online. The…read moreonly problem was that they were too tall. We went all around town trying to find replacement rods that had the correct thread count per inch. Couldn't find new rods nor could we find someone that had the means to cut the existing rods to size and turn threads to match. I spoke with Brian at Becksted, and he created new rods with perfect threads. He got this done in short order--he's a true professional who knows his craft.

From the owner: Here at Becksted Machine Inc., we deliver great and top quality Machining for our community and…read morebeyond. For your manufacturing needs, commercial needs and many more. Please give us a call today so we can help you and answer all of your machine questions. Dependable Machine Work Since 1953.

John is a competent machinest who does quality work. He machined a 22re for me in 2007 including…read morethe head and as of 3/25/2020, that motor is still strong. 2 thumbs up for PO Machine Shop.

The customer service is top notch. I bought a dual battery tray for my Optimus years ago and only…read morejust starting to working on the truck now after about 8 years. I couldn't find a few pieces that were shipped with it that long ago and contacted the company, within days was sent what I needed and no questions about when how or a receipt needed. Only which pemnuts I needed. Joel was quick to answer any email and questions and I was very impressed with not only the rapid response but the shipment of the part without even knowing it was sent to me. I'm stoked and will definitely be doing business with again

Dana 60 shave kit came with the welded plate bolt hole threads underformed. Looks like a worn tap…read morewas used and they are not inspecting their work. I had to buy a tap and chase these threads myself. When I reached out to them, they acted like it was my responsibility. So much for customer service and quality production work.

I just had a simple job done, a few studs pressed on to my new rotor. He called to let me know that…read moreone of the studs was the wrong size and asked if I wanted to get the right one or he offered to go and get it for me. It's that little touch that impressed me. The price was very fair, I will go back for any of my needs.