Jon was very responsible and conscientious. He fabricated and installed some fence sections to…read morematch existing fence at our HOA pool. He was also responsive to our schedule requests t

I requested two different gates to be built. He came out looked at my property and measured. He…read moretold me he would send me a written quote which he did, with the cost the timeframe and expectations. I informed him that I would not be home at the time he chose for installation, he said that would be no problem. But the install date came and no gates . I waited thirty days past install date and was told another month the gates would be finished. Numerous excuses and delays. Finally he showed up to install the very large and heavy gates alone. Being it was late in the afternoon he dropped off the gates and said he would return the next day. We noticed on one of the gates it was a foot too short also numerous areas that had damage. We took photos and sent them along with our concerns to him. His response was very angry and unprofessional , that's all I have to say about it. He came to our home the next day and took the gates and never returned to finish the job . So i even tried reaching out to have the job completed and was told no not interested too busy. So I would not recommend this business sorr

They cleaned a 5.3 LS block for me including the rotating assembly and heads. They were very busy…read moreand still got my engine back faster than anticipated and it was great work!

These guys did a top notch job! I needed my heads resurfaced after my wife let the car run while…read morenot checking the radiator fluid. The heads warped and I thought I was going to have to replace them... Machine Works Machine shop got me back on the road at a price I could live with. Thank you!

I walked into George's shop with some heads, we've never met and he was more than happy to help me…read more I brought heads from a 66 toronado for machining and valve seals because I couldn't figure out why it smoked so much. As soon as George saw the heads he told me the wrong valve seals were on from the previous owner. He fixed it in 3 days for a very affordable price and now I can get started on getting this project on the road. I'll be taking heads from other projects I have, I'll be sending my friends to him, and I suggest everyone reading this to go to George. Thanks George!

I've been coming to this machine shop for the past five to six years. George is the most…read moreprecessional machine shop I've ever dealt with. To date I have taken him 4-5 vehicle heads. 1974 Plymouth Valiant slant 6 (heavy as hell) got head shaved down for better compression, hardened seats, and a valve job. This was a great idea the car is still running great by the way. The second was a 1995 GMC Sonoma 4.3L TBI V6 two heads cleaned leveled and valve job. The third was a 2003 Mazda protege 2.0L I4 head cleansed leveled and valve job. Forth 2000 GMC Jimmy 4.3L Vortec V6 cleaned heads level valve job. So I will never go anywhere else. Also FYI they also rebuild engines so this means that is you need your crankshaft turned or engine kits or replacement parts like cranks call them first. I'm telling you they are the first number you should ever think of. Check em out

Purchased an alternator from Cost Less and had it replaced in their parking lot only to find that…read moremy car still didn't work. I had to have it towed to my mechanic where he found the alternator purchased from them was bad. Per my mechanic, that was my first mistake. He added that they had horrible customer service and they weren't going to like me telling them their part was bad. HE WAS ABSOLUTELY CORRECT! They did not want to give me a refund; stating that their policy is no refunds on parts that were already installed. How was I supposed to know it was bad before installing??? I had to argue with them and they stated they had to confirm their alternator was bad. They were supposed to contact me the next morning, but instead they avoided me. They eventually ended up refunding me my money and stated they had it tested and it was good. But my car worked perfectly fine with a new alternator from Tucson Alternator where they tested the old one and confirmed it was bad. They also charged me a 15% restocking fee.... for their BAD alternator!!! Instead of apologizing for the inconvenience, a week without my car, a tow fee of $130 and labor for my mechanic when it could've been fixed that same day in their parking lot if their part was good; they were the ones upset at me. Horrible experience. Highly recommend everywhere else except COST LESS!

Great prices for my Car and may I add .the great customer service when I arrived for my car…read moreparts.fast and reasonable

Larry's is amazing, Jimmy Anderson is the most knowledgeable guy I have ever met especially for…read moreTwin Turbo's as well as all rigging especially Hi Horsepower VDrives He actually built my boat for Hallett back in 1988 and was the lead guy for Hallett VDrives doing all the rigging and with precise attention to all details and degrees. I highly recommend them for Boats in particular

Unless your going to be spending $50000 on a engine here, don't bother. The owner acted like he had…read morebetter things to do, and did not listen to a word I said. Took 2 months for a estimate and then he said I owed him $800 just to tear down a motor. I was a little shocked. When I dropped off he said nothing of the sort or that it would be that much. little steep for just a estimate.

I asked Dwayne from STL to build me a Hybrid BBQ/Santa Maria grill. You see I wanted to be able to…read morenot only raise and lower the grill but I also wanted to be able to spin the Grill. What I received was amazing and it exceeded all of my expectations. I am now having a custom hood built for this same grill. Thanks Dwayne and crew.

Originally had Dwayne Morse come out to my home to give me a quote on a new door for my courtyard…read more He seemed knowledgeable and the price was competitive. I've called multiple times to solidify a design and move forward, yet every time I call his shop, I get the answering machine and no return phone call. Pretty much not a word in the last two months. Looks as if I'll have to do business elsewhere.

I just had a simple job done, a few studs pressed on to my new rotor. He called to let me know that…read moreone of the studs was the wrong size and asked if I wanted to get the right one or he offered to go and get it for me. It's that little touch that impressed me. The price was very fair, I will go back for any of my needs.

Great work! Fast and efficient with professional services…read more I recommend anyone to this establishment

These guys do a great job! Were very prompt to aiding me in my windshield replacement. Very…read moreresponsive to messages, and pricing was great! Held my quote for a couple of months and gave me time to get my finances together for it.

Koerner Racing is one of the better machine shops in AZ. In the past 28 years i have had to deal…read morewith many machine shops and koerner racing is at the top of my list. They are honest and provide top quality machine work and pay attention to detail. If your looking to build an everyday engine or an all out race engine or even just cylinder heads or tune a carburetor , these are the guys to do the job and do it correctly.