We found it was in the area while visiting and just had to stop in. I had been shopping their…read morewebsite for a while and had no idea we were so close. It was a great experience and seeing the classic cars and the smells of oil and gasoline reminds me of my own 57 Chevy

I am very disappointed with my experience with Gateway Classic Cars. On April 9, 2026, I purchased…read morea classic vehicle for approximately $50,000. I understood the car was sold "as is," but it was represented as having only 1,440 miles on a rebuilt engine. About two weeks after delivery, the car broke down while I was turning into my driveway and had to be towed. After getting it back on the road, I drove it again, and the engine catastrophically failed on the interstate. At that point, I had driven the vehicle only 72 miles since taking delivery. I contacted Chris Rockwell to explain the situation. After speaking with management, the dealership offered only $1,000 toward rebuilding an engine that I was quoted approximately $6,500 to repair. I understand the risks of buying a classic vehicle "as is," but I expected a rebuilt engine with such low mileage to last longer than 72 miles. Based on my experience, I cannot recommend Gateway Classic Cars.

Axleboy is great. I wish I could give them 6 stars…read more I have a 1995 Wrangler YJ. They lifted the body off the frame, blasted and sealed it, replaced the gas tank, lines, etc. They also replaced the 3 speed automatic with an AX15 5 speed, and installed a Ford 8.8 in the rear. They installed 4.56 gears, a locker in front, and a posi in back. That was months ago and no issues. I'm getting ready to take it to Colorado and I have no fear.

*ATTENTION*WARNING* Buyers beware!!…read moreI have been in the automotive industry from the factory level to building Sema show vehicles for nearly 30yrs. I have had work done here years ago, and Scott the owner was involved and the service was great to my "SEMA" jeep build. I have relocated back to the area, and I'm being told by the Mgr Steve that Scott is pretty hands off now, but he could take care of me. I had them quote me to install a brand new Carli lift on a brand new Ram 2500. Steve quoted me $2300 and I called the manufacturer of the lift, to verify the amount they were quoting me, and they specifically told me that they do them daily at their shop, and it's should be in the range of $1200-$1600 including the alignment, but no more than that. First red flag. I then asked them if they could put new tpms sensors in a brand new set of beadlocks and tires that the tires are already mounted to the rims, and I told him that I needed them to supply the sensors as well. He then quoted me $650, in which I had scheduled a different appointment for that. I also was a supervisor in the military and a department mgr at an automotive manufacturing facility. So I know to be very specific and detailed when I'm explaining services needed. I told him that they were beadlocks, and they needed to be dismounted and sensors installed and rebalanced. He even told me that they wouldn't program the sensors until we got the lift installed. I confirmed everything with him at that time. I took the rims and tires to the shop to drop them off right when they opened. I asked him if they would unload them from the truck, he paused and looked at me as if it was my job to unload them. And said, let me see IF I can find someone to do it. He comes out to the truck and said, well I guess I'm helping YOU unload them. So I unload 2 wheels and we rolled them into the shop. There were around 6-8 guys just standing around talking, since they were just opening, and they watched US roll the tires to the back of the shop. One of the techs whispered to him something, and then Steve came to me, and said "man I didn't know we were doing beadlocks". I said yes I told you that, and not only that, you helped me unload it and wheeled it into the shop! A blind man can see that they were beadlocks, not to mention how much heavier they are compared to regular rim and tire. He then said "let me go check something". So we walked back up to the front counter, and he said "man they'll kill me if I make them do this for $650". he then told me that it would be $1200 to do the job!! I said "no way!" So I went and rolled one of the wheels out to my truck and loaded it, and he followed me out with the other one and said "sorry man". Well "SORRY MAN" doesn't fix anything. I've called 3 other performance shops in the area and they quoted me $300 to do it, minus the cost of the sensors. Scott, if you're reading this, you should really get back in there man, I had a great experience with you and that Big brake kit you did to my Rubicon, but this guy has no integrity, no ethics, and is going to ruin your company name with practices like this, because I'm here to tell you that I've read the past reviews and there are quite a few of these situations on there, and it won't take long for the word to spread. There are a lot of us who have ties to the auto, jeep, and Offroad industry and this kind of publicity will spread fast. An educated shopper will be able to research and see how this guy is inflating the prices and robbing people! I hope this reaches all the people who were shopping around to buy and get parts installed, do a little research, and educate yourselves so guys like this can't take advantage of you and your hard earned money.

Had my car for two years, and after those year's it looked like it did when it went in, in some…read moreways it was worse it went in for some lite restored work wiring, interior work, body work had been done. Needed to be painted, vinyl top put on and get the engine tuned. I had a M S D Throttle body e f I system, and the engine had just been rebuilt.After spending a large amount of money, all I got was a none running car none of the gauges worked and like everything I charged for, I got the car back just like I took it. I was told by the owner after complaining about the situation that to finish the car it would cost me twice what I've already paid and didn't get. I live in Illinois, would drive 200 miles one way each time they called to let me know they needed a payment. Was told by the shop foreman that I shouldn't complain, nothing goes out of their door under a 1000,000.So if I don't have it to get the car, oh yea I almost forgot I had all the parts to complete the job..... all the parts just a matter of assembly. If there's a god u will get yours. 70 cougar

I am extremely upset by the way i was treated by Precision Car Restorations…read more I paid over $100 K for a restoration project. They sent it home and it broke down. They shipped it back to their facitity and I paid another 13k for the additional work. I got it back and it broke down again. They did not want it back in their shop so I had to get another shop locally to work on it. Finally 9K later I got it to where I want it. I asked them for reimbursement of the faulty fuel injector that they wanted me to replace on my car and they told me they would pay for it. Once it was put on to replace the faulty one that precision told me to put on they refused to reimburse me. I am a veteran and retired law enforcement. I saved for years to get my family car restored. I drove it for less than 100 miles and because it sat in my garage until I could get an appointment with my local garage it went past the warranty date. Precision claimed that because I went past my warranty they refused to reimburse me. They do not treat their customers right. I do not recomment them at all. Please seek out a garage that has a reputation for treating their customers right.

I have found Lens automotive to be very honest and helpful with the care of my families cars. Since…read morebeing recommended to them 8 years ago I go to no other even for tires I stopped using Costco. They are great.

I think that lens auto is the most honest repair shop I have ever been to. I am a very easy…read morecustomer to take advantage of because I do not know the very first thing about automobiles. On top of that - I can be very annoying with my anxiety, because as many know, car repairs cause immense financial stress, especially for a young adult like myself just coming into financial health. They will NEVER do a repair that doesn't need to me done, or upsell you without consent. This should be baseline, but I've experienced this so many other places, especially in Kirksville. The price of replacing my radiator had me feeling physically sick for days because I had no idea if it would total my car or not. They worked around the budget that I had said to find the most workable price for me, and then when my transmission shot in my car 2 weeks later, they found a way to connect a minor transmission repair to my radiator and gave it to me for free. Saving me, what could have been, 100-1k at other stores. Their customer service is off the charts, very knowledgeable and professional. I will continue to bring my car here for the coming years.

Jesse and his wife have created an incredible custom shop specializing in Chevy trucks but…read moreeverything else race car related. An incredible resource of information and is always willing to help. I've had nothing but positive experiences with Level7.

I have been a customer several times at Level 7 Motorsports ranging from Decals and Shirts to a…read moreloaded and prepped Chassis for my C10. The knowledge that Jesse posses is unmatched, The Hospitality that Jesse and Shawne show their customers is top notch. I couldn't reccomend this shop more especially when Quality and Service matter the most!

This place typically has events today was coffee and cars. There was a coffee truck. I do wish they…read morehad free coffee and stuff for the kids. We arrived around 9 AM and the event start at 8:30 AM. I would highly recommend getting here early there were probably close to 1000 people here. The staff we interacted with were very pleasant . They have a wide variety of cars with pricing visible as well as cars for kids Their store that they have on site is also very pleasant, clean. They sell popcorn for kids, and they have lots of toys however it is small so I don't recommend taking a stroller in here.

Over the top experience. We showed up in person I think 1 or 2 weeks ago. All the collection is top…read morenotch and they keep exceptional care for all the vehicles. I wanted to view one truck they had for sale, but we passed on it which is sad for us. Maybe next time. The gift shop was an awesome experience and many cool things for sale. If you're traveling with your pet the owner loves them. I wished I lived up there as I'd be there every day talking to people myself. I don't like the fact we live in the largest state and we don't have a Fastlane near us. We do have some places around, but none of the people talk to you. Go take a look at fastlane. If you see the owner give him a shout and you'll be glad and feel happy when you leave. To bad you can only give them 5 stars. Thank you.

I took them a bare 6.0 block to just be bored and honed and hot tanked....I told them I wanted all…read morethe bearings,pistons, rods and crank installed and told him what my budget was ...he agreed and said it would be ready in a week...6 weeks later he said it was ready when I got there he gave me a bare block that looked horrible had surface rust all over it and a box with some cheap bearings and parts...he gave me the wrong crank ...and my cam wouldn't fit...I will never use these people...and he went almost $1000 over...so he didn't do shit and charged me more ..when I asked for a detailed receipt he told me no. ...DO NOT USE THIS PLACE

Absolutely the most TRASH customer service I have ever seen before in my life. They listed a LY6…read more6.0 GM block for sale that was bored .020" over. Said it was hot tanked, cleaned, painted and brush honed. Pictures on their listing looked like a freshly machined and cleaned block. After trying to pay them for a week they finally took my money. I finally found .020' over pistons since they are rare for these blocks. The block showed up 3 weeks later and was absolute garbage. It was absolutely not hot tanked, cleaned and inspected. There is old dirty oil leaking out of the mains, old gasket material hanging off everywhere, and to top it all off it was still a standard bore block! It literally looks like they pulled a motor out of a junk yard, tore it down and lazily pressure washed it, rattle canned it black and sent it off on a dilapidated pallet missing legs. Rusted, corroded cylinder bores, I mean seriously it is horrible. Absolutely nowhere near what the listing stated. The whole thing is just a marketing scam on their ebay page. I should've known better when they wouldn't even let me pay using paypal or ebay. I called and they said if I sent it back they would refund the money. So now that I waited a month for this motor to build, I now have to pay $300 to ship it back to them and wait for them to maybe refund my money (but not the 1/3 of the price it costs to ship it back)! How in God's name is that customer service?!?! I had to call my bank and file a dispute and got the money for the block back but am now told if I still don't pay to ship it back to them that the money will be taken back out of my account. So all in all I will be out $300 for absolutely NOTHING! This company is trash, if they offered me free engines for life I would refuse and pay someone with good customer service double. And throughout the entire process I was nothing but patient and nice while being ignored and given the run around. So I call back to tell them that it is still sitting here and they need to set up shipping to come pick it up. Even offered to pay half of the shipping at their rate since they get discounted rates and it's only $175 for them to ship it and they refused. I asked to speak to the owner and am told no. And to top it all off when I asked how it makes sense to send someone something they didn't even order (wrong product not at all what is described) she tells me that she sent me something better because it's a standard bore! I don't care how you feel about it being better or not, it is absolutely not what was in the product description. I had asked when ordering how much they would charge to bore it to .030" over and it was too much and I didn't really trust them to do it right. So after telling her that I had ordered the 020" over pistons and was going to use them since that's what the bore of the block was supposed to be she said I wouldn't have been able to use them anyways because the block would've still needed to be bored. Why in the world would you need to bore a block that is 4.020" even more to use pistons that are 4.020". you would need to finish hone it to the manufacturer specs of the pistons which some are made to go directly in a 4.020" bore (like the ones i ordered. Product description said it was honed already, but was told that it was in no way ready to be assembled coming from her machine shop. How is that even possible?!!? Literally all i want is to have them come pick it up and take it back and give me my money back but basically they sent me whatever they wanted and I should be happy with it because to them "I sent you something better". NO, YOU SENT ME TRASH! I could've gotten something this crappy out of a local junk yard for $2-300! this cost $899 plus $175 shipping. Stay as far away from this place as possible if you are looking for any type of quality anything. regardless of what they come on here and respond with, they send nothing near what they advertised and will not make it right by simply paying the return freight with their discounted rate. This is not my fault! Attached is pictures of their listing and description and of the part i actually received.