Got the job done and on time for a reasonable price. Small shop and convenient. Glad to support…read moresmall shops like this.

Fixed a front brake issue I was having for far less money than I thought it was going to be.read more

Adriano is the man. My bike was sitting for almost two years and he got it running like new. If you…read morewant to pay for quality work then do it here!!! I'll be using his services again soon for electrical work

TWO WHEELS UP AND RUNNING (5 stars)…read more Mobile service to the rescue! I've called around and this one seemed the best and most responsive. There are simple jobs to be done for easy money but finding people willing to do it is the challenge! I am lucky Dridox provided mobile service and came to my home to take of services I need... call service ($75) battery replacement ($65 + $29 for battery) and oil change ($85) , maybe tank flush if it didn't start up after the battery replacement. This is what I get for letting my two wheels sit idle in the garage during the winter months collecting dust. I reached out, got a quote, and scheduled the service with Adriano. I had intentions to do this all myself but didn't have all the tools and would like to see it done first before taking a hand at it... also eager to ride and want these services done ASAP! Adriano arrived early/on time, charged my battery and tested it (def needed a new one), replaced my battery, hooked up my charger device (recently bought it and didn't know it's needed for maintenance), it started so I didn't need a tank flush, but went ahead with an oil change since I was overdue. I did tell Adriano I been nearby g to do this on my own so he did show me how-to and what tools and what to look for or be careful of, which I super appreciate his professionalism and expertise. My little two wheels was probably a cake walk to what he is use to servicing. Within the hour all was done. If bigger jobs need to be done such as engine rebuild - they do that too and can rack your two wheels to their shop. The business accepts credit cards, Venmo, and Zelle. The motorcycle shop that usually serviced my two-wheels for years stopped providing service and only to Surrons going forward... they gain some but lost a lot of the only tailor to only a specific kind. My choices were 1) Do the services myself 2) Tow it to Fun Bike Center and get it serviced 3) Fine a mobile service to do it. With the impatience of not riding and budget considered, mobile service was best especially when watching and learning to (maybe) do it in the future yourself. For any future assistance with my two wheel maintenance, I'll be giving them a call. I highly recommend their services.

Great company with excellent customer service. Our bike was…read morein and out right away and was fixed without having to go back again. If you want an experienced motorcycle company that knows what they are doing, go to Wayne's Motorcycle Repair.

From the owner: Wayne Reiner Founder Of “Wayne’s Harley Motorcycle Machine Shop” Was Established In 1978 In The…read moreOriginal Building Where Is Located Now 10020 Prospect Ave Suite A12. As A Family Owned Business Our Shop Is Based Upon Honesty And Respect. For Our Customers We Strive To Fulfill Our Customers Needs In The Repair Of There Motorcycle So They Can Get Back On The Road With Their Bike. When Wayne First Opened The Business, El Cajon Harley/ Chuck Holenda At The Time Would Send Rebuilds And Work Over To Us As The Community Was Booming. Specializing In Antique Motorcycles Has Some Of The Most Knowledge On Motorcycle Repair And Engine/Transmissions. Harley Parts New And Used From Antique To Modern Give Us A Call And Well Give You A Quote. Selling Parts And Motor Rebuilds Is Our Main Focus Now.

These guys are so awesome. They know what they're doing when it comes to proper setup. Doesn't…read morematter if your riding sand, dirt or mud. ECU pros. Awesome custom setups, dyno equipment and they know how to use it. Great customer service and they're willing to work with you to find the right solution. Thanks guys!

Last August I bought a set of rings for my Raptors 700 the luxury rings that they have just added…read moreto their list of products caught my attention a lot because they are rings that look very good and I loved to have them as an extra set to keep them clean in addition to the fact that economically they are very accessible for customers like me who are not customers of a lot of money at the time of assembling the rings with their rubbers I began to notice where the quality of the powder coating or powder coating was to be noticed of very Poor quality since it began to detach from the parts without even touching them with my tools I used a 1/4 inch tool for the installation according to the manufacturer's recommendations even so the paint began to suck however I continued with the installation and following the recom El pasado mes de agosto compré un Set de aros para mi Raptors 700 los aros de lujo que ellos acaban de añadir a su lista de productos me llamaron mucho a la atención porque son unos aros que se ven muy bien y me encantaron para tenerlos como un set extra para mantenerlos limpios además de qué económicamente son muy accesibles para clientes como yo que no somos clientes de mucho dinero al momento de ensamblar los aros con sus gomas comencé a notar donde la calidad del recubrimiento en polvo o powder coating era de notarse de muy mala calidad ya que comenzó a desprenderse de las piezas sin ni siquiera tocarlas con mis herramientas utilicé una herramienta de 1/4 de pulgada para la instalación según las recomendaciones del manufacturero aún así la pintura comenzó a chuparse no obstante continúo con la instalación y siguiendo las recomendaciones al detalle del manufacturero apliqué las cuatro libras de de presión de torque y luego sus seis libras de presión de torque de todos los 48 tornillos uno no soportó las seis libras de presión y se partió llamo de vuelta a las oficinas de Alba Racing y pido hablar con la persona que usualmente me atiende ya que soy un cliente de hace mucho tiempo de ellos y nunca habías tenido una situación como esta ellos me pasaron con una de las personas que diseñó los aros y esa persona en todo momento tuvo una actitud y un tono de voz desafiante tratando de intimidar y aprovechándose de su fluidez en el idioma del inglés el cual es un idioma que yo personalmente no domino al 100% esta persona en ningún momento estuvo en la disposición de ayudarme o de por lo menos darme recomendaciones para solucionar solucionar la situación y remover el pedazo de tornillo que está incrustado en enviar que actualmente ya el aro no sirve yo no llamé para que me repusieran mi dinero ni me repusieran el aro simplemente necesitaba una voz de ayuda la cual nunca conseguí al comunicarme de vuelta con ellos esta persona comenzó a tildarme de qué soy una persona que no gasto mucho dinero en mis equipos ya que escogí una goma SUNF y comenzó a expresarse bien despectivamente de la marca de llantas @SUNF qué fue la marca que yo pude costear porque no soy rico y esa es una de las razones por la cual usualmente Optó por comprar las piezas de mis máquinas con Alba Racing otra cosa que esa persona me dio a entender es como que era mi culpa porque yo debía haber sabido que la calidad de los tornillos que ellos envían con los aros son de muy mala calidad y de no ser la medida adecuada para la aplicación que yo estaba desarrollando lo cual yo le dije que era imposible para mí saberlo ya que era la primera vez que me sucedía una cosa así con piezas viniendo de ellos yo siempre había confiado en ellos al 100% le traté de explicarle en numerosas ocasiones que ellos deberían orientar a sus clientes y dejarles saber de qué este tipo de situaciones requiere otro tipo de tornillos cosa que yo me enteré al momento de llamar luego de la rotura del tornillo. Para futuros clientes, Les pido de favor que si en algún momento se ven en la situación que me he visto yo donde quieren tener una máquina luciendo bien por favor no opten con comprarles a estas personas ya que no son nada de lo que eran hace más de 15 años atrás la calidad de sus productos son de muy mala calidad fabricados en China no son nada fabricados aquí en los Estados Unidos yo les recomiendo yo que fui cliente de ellos por muchos años les recomiendo que por favor se den a la tarea de revisar el precio de otras piezas y si tienen que esperar uno o dos meses más para poder reunir el dinero suficiente y comprar una pieza de mayor calidad y que no sea de ellos por favor considérenlo Porque si algo sale mal nunca nunca van a obtener de ellos la ayuda que un cliente anda buscando no siempre nosotros los clientes queremos nuestro dinero de vuelta en mi casa yo simplemente estaba buscando alguien que me diera un consejo y una voz de ayuda alguien que me diera ese aliento para poder solucionar una situación con la que me encontré. Yo me sentí super humillado por la persona que me atendió que nunca me dio ni siquiera la oportunidad de expresarme correctamente.

First of all, Papa bears Moto repair, which is ran by Charles, is definitely praiseworthy. Charles…read moreis an excellent communicator and can work with your schedule. He's a very friendly person, and when it comes to motorcycles is extremely knowledgeable and intuitive and looks for ways to get the job done quickly, efficiently, and cost-effectively. The service I requested was a carb clean and an oil change, and he did just that. I was working from home, so I came out to check on how things were and he showed me what he was working on and went into detail about what he was fixing and got the job done in the timeline that was estimated. My 1999 Yamaha V star is back running and I couldn't be happier. Highly recommend this business to anyone thinking about that bike that needs fixing that's sitting in your garage or whoever you know needs a moto repair. Again, fair pricing, and great work. 10/10!

I am so happy that I took my motorcycle to Charles. My…read moreSuzuki Boulevard M50 was having trouble starting when the bike was cold. I called different bike repair shops and no one wanted to tell me anything over the phone. Fortunately, I got in touch with Charles through a recommendation of a friend (word of mouth). Within the first few minutes of talking with him on the phone it was very apparent that Charles was very knowledgeable and experienced in moto repair. In my particular case he explained that based on my millage since last getting serviced, it was most likely the valve clearance that needed to be checked and adjusted. (He mentioned a few other things that could be a cause as well, but said it was probably not as likely as the valve clearance.) Anyway long story short, he adjusted my valves as well as cleaned my fuel injectors. When I got my motorcycle back, it sounded and rode better than ever before. It sounded and felt like a completely different motorcycle (in a good way). Charles is very passionate about motorcycles and loves to talk about motorcycles and motorcycle repair. He did a great job, and at a price that is far more competitive vs the bigger guys (who just want to get your bike in and out as fast as possible). In addition to the great service and pricing, what I really like about Charles is that he is always willing to take the time to talk with you (over the phone or in person) and will answer all your questions. I definitely feel far more knowledgeable about my bike after my conversations with Charles. From now on, Papa Bear Moto Repair is the only place that I'm taking to get work done on my bike. P.S. I used to have a really bad stalling issue with my bike. Even after supposedly getting a valve clearance adjustment with Fun Bike a couple years back, I still had a very annoying stalling issue. I thought that maybe it was due to the fact I had an aftermarket exhaust and that I needed to do a dyno tune. Well, turns out that after doing the valve clearance adjustment with Papa Bear Moto (Charles), the stalling issue seems to be completely gone! I guess a valve clearance adjustment is really important. (This is why I believe that Fun Bike didn't do a proper valve clearance adjustment a couple years back.)

Nick is a true pro and very detailed I his work His paint…read morematching is top notch great work will definitely be back for future projects

Nobody beats loose Cannon! They know what they are doing and do the BEST job! I took my Lotus Elise…read moreto the supposedly top auto body places and nobody would touch my car. These guys took one look and said yes! They went the extra mile with everything and were so easy to work with! They even recommended painting my rims and they gave me back a very different car then I gave them! I wouldn't go anywhere else!

I cannot say enough great things about Guy Szalkowski at Wrenchmasters. From start to finish, this…read morewas hands-down one of the best experiences I've had with a mechanic. Guy was incredibly thorough, honest, and respectful of my time, and his pricing was more than reasonable. He took the time to show me the damaged parts, clearly explained everything in a way that actually made sense, and never made me feel rushed or pressured. The level of care, transparency, and professionalism was outstanding. It's rare to find a mechanic you can truly trust, and Guy is absolutely one of them. This was an all-around fantastic experience, and I would highly, highly recommend Guy Szalkowski, owner of Wrenchmasters to anyone looking for top-quality, honest work.

These guys are top notch. They go above and beyond and have AMAZING expertise in their craft.read more

I really like finding owner/operators like Konstantin. Sounds cliche but when you own a business…read moreand interact directly with the customer and provide them a service, you're much more likely to care about what you're doing. I needed a front fork seal rebuild on my bike. I'd gone by a big local place up in Kearny Mesa (won't name) and dude was dismissive, like 'ah yeah a couple hours to pull the forks, a couple hours to rebuild...but we're a month out to get you in'. Acted like he didn't want my business and wouldn't even provide a number 'uh yeah like $130/hour times 4 hours, and yeah parts too'. Gel haired, flat brimmed, frosted tip 50 year old goofball. SD moto did a 24 hour turnaround. Yep, actually less than 24 hours. They preemptively got the parts (he paid for them) dropped bike off Friday, picked up Saturday. Beyond happy. I have a valve clearance coming up in a few thousand miles and I'll coming here. Also he's from Bulgaria , not Russia. Good guy! Edit Bulgaria NOT Belarus haha. Sorry!

I was having my 2006 Kawasaki Zx10R serviced by a cycle shop closer to my area for years called…read more(motozone) on el cajon blvd but one day the main mechanic there named Roger told me my bike was too old for them to work on so I then stopped going there & I woiuld not recommend them to anyone. I then came across SD moto repair & found brother constantine. He is a 1 man worker but he does work at a fair price, & does it a good time frame & i have been taking my ZX10R to him for some years now for oil changes, tire changes, brake & master cylinder work, front & rear sprocket & chain replacement etcc.. he was even able to find me a replacement fairing for my Zx10R which are hard to find now because of my bikes age & he helped me today (9/13/25) properly fit a green rear seat cowl on my ZX10R that I bought on Ebay that is seen in this photo. I would reccomend him to any rider that needs their cycle serviced for fair pricing, good work & good turn around time. He also doesn't tell his customers "your cycle is too old" as the motozone mechanic told me years ago.

Called in for a quote to get my motorcycle fairings ain't it because it had some scratches but Brad…read moreadvised me to just get new ones as the cost would be relatively the same. Definitely appreciated the honesty vs trying to sell me. Will definitely be coming here in the future when I need a paint job

Brad at Speedzone Paint + Bodyworks is a magician amazing work, fair price, and finished when…read morepromised. We are river ready.