Start off by saying, I have never been here but wanted to do a review as this business really…read morehelped out a client of mine when we were at a loss. My 42 yo client is wheelchair bound and unable to move any part of her body without full assistance. Family depends on haudralic hoyer lift that moves her from one surface to another. It broke. Called all around to get it fixed. The company who she got it from said she couldnt get a new one because it was not 5 yrs old yet and insurance would not cover. Couldnt tell us where to even get a loaner. They didn't know who could even look at it to get it fixed. One medical company I found requested they take the lift in to have it checked. The lift is a few hundred pounds and would require an open bed truck. Looked at purchasing a new lift but it was over $1000. Anyways, 2 weeks later the mom saw this place while driving by and decided to walk in and just ask. A gentleman greeted her and explained they don't do small items by if she could just bring in the hydraulic part, he would be happy to look at it. The next day they fixed the part while she waited and when mom asked for the charge, he handed the part back and said...early Xmas gift. Dont think this staff realized how much this meant for the family/pt. My client no longer had to sit in the wheelchair all day until her brother got off work to help her 2 elderly parents manually lift her back into bed. When she wanted to get onto the toilet, she could now without having to sit in a dirty diaper all day. Thank you guys for extending a hand to help. The family were in tears when they finally got the lift working again.

I wasn't sure if they would take in my simple job as they seem to do very complex machine work for…read moreengineering companies (saw certificates of appreciation from companies like Boeing and NASA). I thought they would scoff at my request and send me off. However, that wasn't the case at all. I just wanted some holes drilled into my aluminum ice scoop to let water pour out as I scoop. The machinist who helped (I think he was the owner) was very professional and asked me about how I wanted the design of the holes to be. There was no waiting-he just did it right there on the spot. Took his time to really measure up where he wanted to drill the holes on the press and also took time polishing each hole. The attention to detail was impressive. Thank you so much! I'll be bringing more ice scoops in the future!!

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Terrible terrible service. I brought my lawnmower in for an…read moreengine issue. From the get go I could not communicate with the owner, he was rude and dismissive of me. I tried unsuccessfully to tell him what the problem was and what I had done to the engine already. He brushed me off rudely. I called the shop 3 days later and scheduled the pick up. Again, extremely broken English, charged me $79, no receipt, and would not tell me what he did except yelled "I clean carburetor ". Took the mower home and the engine issue had nor gone away. Still ran really rough and died several times. I took a video for proof. Drove back to his shop showed him the video and asked him what he had for my mower. I used Google translate and he would not communicate with me. Very frustrating. I asked him to fix it again and he would not. I got my money back and tried again to ask him what work he had done to my mower. I left wirh a broken mower, my $79 back, and 3 days waisted waiting for my mower to be repaired.

Good reconditioning at a fair price in a timely fashion. Good mom and pop shop, Thank you.read more

I've been taking my lawn equipment to Simon's for 30 years and I'm never disappointed. My equipment…read morewas fixed or tuned up exactly as they described it would be and always on-time! I can't say enough good things about this business. It's nice to know places like this still exist!

Simon and his son Alex are excellent business owners and mechanic technicians. They are…read moretrustworthy and honest the kind of people you want to do business with. I've been looking for a Power Trim edger which has been extremely difficult to find in Cali. Alex was so polite, responsive to phone calls, and patient in explaining the equipment performance and history. They had 2 lightly used edgers and were extremely accommodating to my landscaping needs. I ended up purchasing one that they had tuned up including a replaced blade and it works like New! I also ended up purchasing a used gas powered Echo chainsaw for a great price. Something I needed for all my fire wood pile and tree trimming. If you have tree trimming power tool needs or landscaping equipment needs and want professional, trustworthy, hassle free experience I highly recommend Simon's Power Equipment.

Although I paid a price because that's the going rate for mechanical services I walked away pretty…read morehappy. They alert you via messages on when your equipment is ready for pick up. The units I took there was my John Deer lawnmower and my Troy built edger. Both worked well after repairs.

Was there sat morn at 7am. Alan was extremely helpful with my Makita weed wacker. The bottom had…read morefallen off and he put it back in and made sure the wires were ok. He then tested it to make sure it was working properly. He did not charge me. I am a senior with a new Makita that I have no idea how to handle it. Mahalo nui loa Alan

Did a great job on a small weld that I needed. Quick…read moreresponse, reasonable price and quality work Would definitely use them again I hope I don't have to though

I'm sure they are great. I wouldn't know because Yelp doesn't do well with connecting projects to…read morebusinesses. I specifically needed an automotive machine shop but was connected with many businesses that aren't that.

After waiting 4 weks for the repair of my weed wacker…read more Finally , ask them iof they had fix stalling issue. They was they tested for 30 minutes. Great NOt. Took home startyed up, it last about minutes beofre it stalled. Do not waste your money with these guys.

Luis did an excellent job repairing my chainsaw...I highly recommend Luis for any repair…read moreneeds.....fair prices and quality service

Vance and the crew do exceptional work for a fair price. See them, they can help you.read more

Very pleased with the machine work done on our 2008 Volkswagen Tiguan which unfortunately required…read morea valve job because the prior owner did not change the timing belt. The owner Vance is very knowledgeable and helpful in answering all of my questions. They were able to finish the work in only 7 days and used only original German parts. Needless to say my family is very happy with the great service we received. Highly recommend to all my friends and family.