I tinker with my firearms and enjoy learning as I go, but there are certain jobs I simply won't…read moreattempt on my own. Today was one of those times. I needed the muzzle changed on my Sig AR, and even after watching several YouTube videos, it became obvious this was a task better left to a professional. Texas-Star Gunworks came highly recommended, so I walked in already feeling confident, and they still managed to exceed my expectations. It's incredibly reassuring when you meet someone who not only knows their craft, but clearly lives it. Mr. Girard was personable, easy to talk to, and genuinely enjoyable to chat with. But the moment he started working on my firearm, you could see the shift, he was in his element, focused, precise, and absolutely in command of what he was doing. I knew when he finished with my weapon, I would have positive results. Watching an expert at work is something I always appreciate, and this was no exception. The level of care and skill he put into the job made it clear I had brought my rifle to the right place. He knew what part I needed within seconds, and lucky even had that part in stock. He knew the special needs of my weapon based on brand. He knew the process to assure the gas would be relieved properly from the muzzle. HE KNEW HIS CRAFT. From now on, anything I need, upgrades, repairs, or anything in between, Texas-Star Gunworks will be my one-stop shop. The entire experience was outstanding, and Mr. Girard was nothing short of exceptional.

I walked in with a jammed cartridge in a vintage rifle and Chuck took time out of his extremely…read morebusy day to extract it for my needs. First time customer but I will be back. I highly recommend their services.

Knowledgeable and professional staff, great place to do FFL transfers…read more Large selection of new and used items to browse for.

they tried to give me less than $100 for a brand new mossberg 270 they will buy a gun for $300 and…read moresell it for double the price the bought it for. worst place to sell you're weapons

Mike is great. I had a small issue with the wrong part and he brought it up immediately. Would…read moredefinitely do business with again. Great price for the work requested

Great gunsmith! My Colt 1911 was in need of overhaul/restoration and Mike came through huge. Very…read moreeasy to contact and work with too. Highly recommend.

Dropped off my AKMS last week, honestly with some neglect. Light rust on the barrel, haven't…read morecleaned it at all in the 300 rounds that I've put through it. The gunsmith assured me that it would be night and day. Picked up my rifle today and the man is true to his word! Looks like a brand new gun! I am very pleased with how it looks and feels. You can tell that they are passionate about firearms and do high quality, great work. Definitely suggesting this place to anyone and everyone that needs a firearm cleaned. Thanks again Superior Gun Care!

I brought my gun to Victor to take a look at it, he was very knowledgeable, willing to help and…read morefixed my gun in 2 min! I am really impressed with professionalism in this shop and specially Victor who is professional, respectful and generous!

My go to range for years. Close,convenient and very affordable. The staff are always friendly and…read morethere's wide selection of firearms for sale and rent. Highly recommend!

Great staff and selection ! Always a pleasure to visit! If you are in the Plano area stop by.read more

Had a great introductory class about gun safety and handling, looking forward to going to the range…read morefor the next step!

From the owner: We offer special order guns, bulk ammo, accessories. We also offer gunsmithing. We do not currently…read morehave an active store front so orders and gunsmithing drop offs are by appointment only.

I really wanted to like this place. It's clean, organized, has a ton of options, and everyone…read moreseems friendly. The problem I have is my friend and I were shooting. Both of us in our 50's. One of the range hands looked to be 20 at best. Young enough to be our kid. Anyway, he kept asking about my gun case because I had a .40 sitting in it and not at the shooting area. I had explained to him I wanted to shoot it, but they didn't have .40 ammo. He didn't like that my case was open with the gun inside. He asked my friend to close my case which my friend did. I finished going through my two mags, went back to our area and noticed my case closed. My buddy said, "The kid was nervous it was opened and asked me to close it". No big deal, all good. Except, we were asked to leave by another range employee because he didn't like us referring to the other guy was "the kid". There was no harm intended. We weren't being derogatory, it was simply a description, the young man could have been our kid so my friend referred to him as ". The kid ". We were kicked out because of that. It won't hurt them, it won't hurt my friend, and it won't hurt me....but he nor I will return. I get safety issues. I get hate speech, but this was ridiculous

Very well run clean easy to navigate setting/welcome area…read more We've been several times now and each experience has topped the previous one. A big shout out of thanks to John, one of the range officers. He was very patient with us and our friends and helped answer questions we all had. We had a great time and learned quite a lot And on Tuesdays when there are ladies discounts offered , well you can't beat the prices. Looking forward to another visit soon.

About a week ago, I was in need of some relatively minor gunsmithing. I had attempted to remove a…read moreflash hider that was really torqued on and believed I had loosened my barrel. Knowing that there can be issues if barrel/bolt face headspace gets off by too much, I decided it best to have a gunsmith re-torque everything to specs. I submitted a quote request via Yelp* and within a few hours I received three replies. The first came in at $40 for the fix, the second - which was Barnestormers - quoted $75, and the third just said gimme a call and we can talk about it. Riiiiight... Because Chuck of Barnestormers mentioned the possibility of my having sheered off the barrel index pin, I decided to go with Barnestormers. I figured that if I had sheered off the pin, I would at least be in good hands, thinking that Chuck is going to do a thorough check to make sure everything is as it should be. Chuck is friendly enough. He conducts his gunsmithing operations out of his garage which, as I shared with Chuck, reminds me of my own garage, wherein I place something and then can never find it! Chuck did find everything he was looking for when I was there and, while I could criticize his operation and seemingly disorganized workspace, I was grateful that he was cool with my being present while he worked on my AR. Foremost, let me say that Chuck completed the work on my AR in relatively short order and I am happy with the end result. That said, I was disappointed that as Chuck attempted to remove my barrel nut and delta ring, he damaged the barrel nut significantly by breaking off a tooth or two; really making it an ugly mess! The teeth on the barrel nut were damaged because Chuck lost control of the barrel nut wrench when attempting to loosen the nut. In his defense, the nut was seriously tight, but I think with a bit more care, he would have been able to remove the nut without actually damaging it. And, it probably wouldn't even have phased me, and I likely wouldn't even mention it here had he had a nut on hand (new or otherwise) to use as a replacement for the one he damaged. Or, since he did not have a barrel nut on hand - just in case... that he would comp some aspect of the parts and/or labor on my repair work. Instead, Chuck produced a complete new handguard with barrel nut included as a prospective solution, the acceptance of which would result in somewhat of a configuration change on my AR annnd an increase in costs. Because I did not want the damaged barrel nut put back on, only to end up feeling the need to replace it and incur further costs in the future, I opted for the new "furniture" and to have the issue solved while attention was being given and money being spent. Chuck quoted me $90 for the new, 10" UTG free float handguard, which I trusted and now know was a decent price. The main issue I take with my experience and the main reason for the less than stellar review here of Barnestormers is that, I calculated $75 for the labor and $90 for the new handguard. So, $165 out the door. And, while I did not specifically ask for it, I did make mention of being a disabled veteran and kinda hoped Chuck would feel compelled to offer a nominal price break for my military service to our country. But, when I asked for a total, Chuck said $200. Now, because I am the type of person who chooses not demean another man's worth, I paid the $200. I just felt that there was a bit of a bait and switch of sorts and that, if anything, there should have been a discount off that quoted for my being captively motivated to accept the new handguard and consequences of what I perceived to be Chuck's carelessness. In the end, each of us weighs different aspects of business differently and you very well may disagree with me on this one, but if you decide to go with Barnestormers Armory for your gunsmithing needs, consider yourself informed! I know for myself, I personally will shop elsewhere next time. Live well. Be well. Cheers!

I needed the services of a good gunsmith to rebuild a Browning SA22 for me. I had taken the rifle…read moreapart wrong & had lost a couple of the parts. I ordered the parts myself, but I wanted someone with more experience than me to put the rifle back together. Chuck got the rifle back together in record time. It came apart while he was demonstrating the repair & he had to reassemble the gun again. He accomplished this while I was there & made sure it was working correctly before I left. He did a good job, he was competent & friendly. I recommend his services & will use his service in the future.