A family oriented, owned and operated business that does work in all of Arizona with offices in…read morePhoenix and Tucson. This company is truly amazing because my mom works for them and they truly care and value their employees. Rudy is a great salesman, with Gama Fence, create your dream project with the help of the best fence company in Arizona. In this type of industry, you pay for what you get, but the staff here is trained to fit budgets and exceed expectations by far. I recommend you give them a call, and ask to speak to Rudy or Debi. If its a new luxurious home being built, or a commercial project, this company is my go to.. not only for the work but for the knowledge of the fence industry this company consists of... With over 20+ years in experience, GAMA Fence is your fencing contractor..... I would post pictures of the work they do, however, theres just too much to decide from. My favorite project? Their custom automated gates are a must see, true elegance and craftsmanship.....

The fence itself is great, and the crews who installed it did excellent work. However, I found…read moredealing with the project manager to be extremely difficult and frustrating. Lots of back and forth about marking the water lines that run under the fence line between the meter and the house. I didn't want the project to start until those lines were marked and Rudy didn't care. Rudy told me installation could begin because he had clearance from the Tucson Water Department. But it turns out that the city only clears the line running to the meter, not the lines from the meter to the house. I found out, after calling 811 (Before You Dig), that the lines to the house are considered private and that I needed to hire a private contractor to locate the lines, which I did. Despite the lines having been marked, the crew broke one the first day on the job. Rudy told me it was an irrigation line (happens all the time according to him). After several unsuccessful attempts to fix the "irrigation line", a plumber was called hours later to fix the broken water line. All in all an extremely unpleasant experience with a happy ending -- a very nice fence.

I am pretty particular about my experiences with contractors and I will state unequivocally that if…read moreI could give 6 stars if I would! First off, the service was excellent! Kase and his crew are polite, professional, timely and very customer-oriented. Kase initially helped us design the fence and then we thoroughly enjoyed having his crew at our house for the installation. Family affair with great people and easy to have around. Ashleigh in the office kept us appraised of progress and was very accomodating when we had delays on our end due to other contractors. They just rolled with it. Secondly, the finished product is absolutely stunning, with obvious pride of workmanship! It's kind of hard to get excited about a pool fence, but let me say that rather than an "industrial" looking standard type of black and straight fence, they custom made a rusted, architecturally sensitive fence that blends in with the elements of the yard beautifully. It looks like art in my backyard! Lastly, pricing was very reasonable, and more than competetive with other bids I received. Retrospectively, I think this was money very well spent and was so much more than even anticipated. I highly recommend this fabricator and would consider using them again. Can't go wrong with this company!

Iron Wolf just got done fabricating an iron door for my front yard and it came out absolutely…read morefabulous. It is extremely heavy duty, even very high-quality down to the bolts that they use to hold it in place. Beautiful, rustic look. The craftsmanship was second to none. Case is extremely experienced (33 years) and I loved the final result. Thank you! Cannot recommend them highly enough.

We requested a quote to repair a fence damaged by a vehicle. We never heard from them again.read more

We contacted Jonathan from Zenith fabrication to see if he was interested in manufacturing a pair…read moreof steel chase lounges for us. Standard, commercially available lounge chairs were too long for the available space near our poolside patio. We discovered Jonathan earlier in the year and we were very impressed with his attention to detail. He manufactured a custom component for my KTM motorcycle and he was so easy to deal with; communication was fluid and pleasant. Once again Zenith proved to be the absolute perfect choice and the results exceeded our expectations! Highly recommended! Five stars.

Jon was very responsible and conscientious. He fabricated and installed some fence sections to…read morematch existing fence at our HOA pool. He was also responsive to our schedule requests t

I requested two different gates to be built. He came out looked at my property and measured. He…read moretold me he would send me a written quote which he did, with the cost the timeframe and expectations. I informed him that I would not be home at the time he chose for installation, he said that would be no problem. But the install date came and no gates . I waited thirty days past install date and was told another month the gates would be finished. Numerous excuses and delays. Finally he showed up to install the very large and heavy gates alone. Being it was late in the afternoon he dropped off the gates and said he would return the next day. We noticed on one of the gates it was a foot too short also numerous areas that had damage. We took photos and sent them along with our concerns to him. His response was very angry and unprofessional , that's all I have to say about it. He came to our home the next day and took the gates and never returned to finish the job . So i even tried reaching out to have the job completed and was told no not interested too busy. So I would not recommend this business sorr

Had an issue with my RV when we passed through Tucson last week. Was able to get Phill and his son…read moreout on a timely basis to do the unusual weld repair of a bracket on my slide. Communication was good and he was able to meet my schedule before we had to leave town. Happy with the repair and price.

Quality work! Saved our day. We needed help along side the…read moreroad and Phil's Mobile Welding took care of everything! Very professional. Fair price.

Getting ready for my first big steel project putting in about 180 feet of metal fence at one of our…read morerental properties, I stopped in a few places around town. The first made me feel I was imposing on them with my amateur questions and I very much got the "move along" vibe. A little bummed I moved on and stopped in at Santa Rita Steel - whole different ball of wax. They have a friendly and helpful staff and a relaxed atmosphere. They actually took me out to the yard and showed me different material options and even some sample fence sections in the back - helping me change my plan a bit and get the correct amount of material ordered up. The first fence project was a hit with both the neighbors and our tenants and I'm now on my 3rd fence - death to rotting wooden fences! I'll always use Santa Rita Steel for my material.

I can not say enough about Santa Rita Steel Company. They literally saved the day! I needed a…read morespecial deadplate made for my outside electrical fuse box. To my surprise, no one sold these GE plates in the whole state of AZ. In fact, I was told by several people including electricians that I would need to spend thousands of dollars to upgrade my box because it was from the early 80's. I am in no position to spend that kind of money. My inspector simply require I have a deadplate covering my breakers. So I got busy calling around to several metal and steel business to request a plate be made. Due to COVID 19 many places didn't have the bandwidth to get this done in a 24/48hr turnaround time or they didn't/won't due this type of work. I was desperate because my deadline was fast approaching. To my surprise, I was guided to contact Santa Rita Steel. I spoke with Poncho and well, the rest is history. Not only were they able to get my plate drafted and made within 48hours, they did with a superb price point. I will definitely recommend calling them to handle your needs, big or small. I have confidence that they can get it done! Thanks again to the SRS team! YOU ALL ROCK!!!!!

Had a small home project that I had purchased on clearance. It came with a piece of the metal…read moreframe- Bent. I was sent to them, and so glad. Tim and Paula were both very nice. My bent frame is repaired and fits together perfect.

From the owner: Welcome to Abbott Metal Fab. We have been serving Tucson since 1972. We are a local job shop (no…read morefield work) specializing in sheet and plate shearing, forming and plasma cutting all types of materials steel, aluminum stainless steel. Welding and fabrication Contact us today for more information. 520-888-3424 fax 520-888-2471 or abbottmetalfab @gmail.com