Donny and Jenn are super easy to work with and do great work. From Powder to Cerakote they do it…read moreall! I have been using them for YEARS! Top quality work with fast turn arounds!

Can't say enough good things about this crew. The few people I interacted with were super friendly…read moreand professional. Did an incredible job on some 2024 GX550 wheels I brought in to get powder coated Bronze. Turn around was 3 days, even during a holiday week! Will return for sure for other powder coating needs.

Chris and the gal behind the counter always coming through for our powder coat needs. Thank you…read morePowder 1 team for being our go to for powder needs.

I am so impressed with the quality, customer service, and speed of the work done definitely coming…read moreback!

Awesome and timely work. Got a bike frame and handle bars sand blasted and clear coated at a…read moreawesome price. Turned it in Friday and got it back on Tuesday. Alberto Z the owner replied in no time after I requested a place. Best price from the other places and AWESOME work!! Highly recommend if you need something sand blasted powder, clear coated and of course painted.

Just want to give a huge positive shoutout to A&J. It's a mom and pop shop, very kind people,…read moreJunior is a standup guy and takes pride in his work. I was in need of a quick turn around time for a project of mine and he took it upon himself to get it out to me faster than I even anticipated and the quality is fantastic. They will work with you and make sure you leave satisfied. They are also very conscious about the COVID-19 pandemic, using masks and sanitizing as needed. Thank you so much.

For a 1971 Buick restoration, had the bumps (they are big) chromed and all SS trim polished…read more Chrome is farmed out and I would rate a 8.5/10 (it's hard to find perfection.) The polishing - perfecto! Nine of this was cheap - thousands of dollars - but all came out beauts! These folks know their work and even restored the rock damaged trim. Bet they could build you a trim piece if needed. Good experience, delays were only for the chrome (polish came in as estimated.). Front staff knows their stuff and is very helpful. I would use them again.

Oscar and his team know how to take care of a customer! Brought my dirt bike swingarm in expecting…read moreto get it back the following week but they knocked it out before the weekend. Will definitely be back next time I need something else done.

I hit something on the expressway that bent my drivers side front wheel on the inside lip causing a…read moresmall leak. After a Google of "bent wheel repair" I got several places and simply began calling the closest to me. I had to provide pictures of the damaged wheel so I removed the wheel and took several pics. After providing pics with details to several local wheel repair shops I was quoted a high of $450 and low of $200. AFW was actually recommended by a guy I called, because he only repaired wheel rash, not bent wheels. On AFW's website, I scheduled an appointment and though I did get an email confirmation, I called the morning of the appointment to confirm if they have a pickup service and if I can drive in or have to bring in the wheel. No pickup service. I only had a slow leak, so I was able to drive in and they removed the wheel for repair. Everyone I spoke with there is very friendly, answering all my questions concisely. The shop can be a little difficult to find as their main entrance is on the side, not visible from the street. It's a much larger shop than I expected with hundreds of wheels neatly stacked on shelves. There's a small lobby and waiting room, but after being told approximately how long it would take, I took a walk down the street to the Omelette Factory Santee. BTW, good food and super friendly staff AFW kept me informed of everything, from the time they started on my wheel, their assessment, an estimate and how long the repair will take. Approx 2-hours for my wheel damage. In short, American Wheel Factory is professional and absolute experts at their craft. My wheel is good as new and they were the least expensive. I highly recommend!

I can't recommend American Factory Wheel highly enough. After I hit a bad pothole, I took my car to…read morethe dealer, who never actually figured out what was wrong. American Factory Wheel diagnosed it correctly right away. Turned out I had two bent wheels and a third that needed balancing, and they repaired all of it expertly. These guys genuinely know their stuff. They're the real experts, which is exactly why they came so highly recommended, including by high-end performance shops that don't send people just anywhere. Darren in the front office took impeccable care of me. I was in and out in a few hours, and the waiting room made it easy, comfortable and with solid wifi so I could actually get some work done. One thing that stood out before I even walked in: the owner, Josh, posts great videos walking through the repair process. That kind of transparency builds real trust and confidence. You know what you're getting before you hand over your keys. If you've got wheel damage, skip the guesswork and go straight to American Factory Wheel.

I had a set of half doors for my Jeep that needed powder coating. The doors have an inner panel…read moreheld on by about 20 screws. I removed all but 5-6 screws to keep the panel in place during transport. When I dropped off the doors, they gave me a reasonable price and assured me they could complete the job within my time frame. When I picked up the doors, they were wrapped in plastic. However, when I got home, I realized they had never removed the inner panel and had powder-coated over the screws, making it impossible for me to unscrew them and assemble the doors. I respectfully notified them of the issue. The staff handled my complaint professionally, with understanding and compassion--until the owner called me. He told me they don't remove screws and that a mechanic should have removed the three 1/4" screws beforehand. He also stated that I had signed a contract that didn't specify they would remove the screws. Okay, I get it. He offered to powder coat another product for free but refused to fix the doors. Again, okay, I get it. So, I asked if he would instead refund $500 of what I had spent. That's when he literally told me to "pound sand." I remained completely kind and professional throughout the entire process, but Phil, the owner, took it to another level. I own a business, and customer satisfaction is my top priority. Clearly, that is not the case for Phil. He is an unprofessional, arrogant man. Be careful when dealing with him--his employees are great, but Phil... not so much. Yikes. Oh phil you're a silly man you really earned this review.

I have been a customer of SDP&PC for years, but after seeing the news today I will no longer be a…read morecustomer! Bad business practices, not good! No wonder I noticed a big drop-off in quality over the last few years, now it all makes sense. My friends and I that are in the racing business will take our business elsewhere

We recently moved to La Jolla and were looking for someone to replace an old metal stair rail. We…read moretook a chance with Efficient Iron Works and we are so glad we did! Paul and Isaac were great to work with from start to finish. They came out to take measurements, discussed the design we wanted and our rail was fabricated and installed in less than two weeks. We are thrilled with the look and quality. The price was very fair. We would highly recommend them to anyone looking for professional iron/metal work.

I recently worked with Efficient Ironworks and couldn't be happier with the entire experience…read more Paul, the owner, is truly exceptional. My deck has a lot of odd angles and was a complicated project, but Paul made everything feel easy. He was extremely communicative--texted me back right away, came out immediately to give me a quote, and always answered every follow-up question I had. It was genuinely a pleasure working with him. My custom-designed railing (64 linear feet) was hot-dip galvanized and took about six weeks from start to finish. Paul recommended a matte black finish because the hot-dip process can leave slight irregularities, but it ensures the metal will never rust. He was absolutely right--the final result is stunning. The railing was installed the day before my birthday party, and we made it just in time. All of my guests and neighbors were blown away by how beautiful everything turned out. Paul is professional, reliable, and highly skilled. I would honestly ignore any one-star reviews--they do not reflect the quality of his work or service. I look forward to hiring him again in the future for a security gate and more ironwork projects. Five stars, easily.

They did a fantastic job at a very competitive price in a short amount of time. I would recommend…read morethem to anybody.

Always do good work . And fast service with a great attitude to customers. Would highly recommend…read morethis shop to have any polishing done

I had a patio table and 6 chairs powder coated…read more Great workmanship and great customer service!

I recently had some steel parts powder coated black and I had a wonderful experience working with…read moreIvan, Amber, and the rest of the team. Not only was the work really good but this is a family owned business as a courtesy and detail of their customer service really shows. Highly recommend!

Really appreciate the help I got from Karra before I brought in 8 chairs for Powder Coating. The…read morecost was lower than other quotes I got and the chairs came back looking fabulous! Very very pleased with the service!! I will use them again in the future!!

From the owner: Action Powder Coating (APC) is a leader in the application of highly durable powder coatings that…read moreare both attractive and environmentally friendly. APC serves world class customers from our facility in San Diego, California.