Alex and his team at Trimlight San Diego are simply the best! We've had our Trimlight system for…read morenearly five years and have experienced absolutely zero issues. We were so happy with the quality and reliability that we recently added even more lighting to our home. We will soon be working with Alex again to install lighting on our deck and outdoor kitchen, and we couldn't be more excited. Our past experience with him and his team has been outstanding. From the initial consultation to installation and customer service, they are professional, knowledgeable, and truly care about their customers. If you're considering permanent exterior lighting for your home, look no further. Trimlight San Diego delivers exceptional products, expert installation, and top-notch service. Highly recommended!

My project technically isn't even done yet and I'm confident in leaving 5 stars…read more Alex and his team have spent the past week doing an enormous $37k+ landscape lighting installation for my botanical garden property, involving over 130 pathway, flood, and spotlight fixtures. The job involves extensive digging, wire pulling, and complicated hookups to feed into existing circuits for underwater pond, fountain, and masonry wall post fixtures, over almost an acre of property. I can't rave enough about how professional, courteous, communicative, and meticulous these guys are being. They show up right on time every day, explain exactly what they're going to do each day, make sure everything is perfectly straight and level, and have even voluntarily fixed a lot of cosmetic issues left over from previous contractors. They're still not done, but still comfortably ahead of schedule -- even with another, considerably less communicative or professional contractor frequently getting in their way. Couldn't even wait for the job to be done to write about how pleased I am. Will try to remember to come back and post pictures once they're done.

I'm so grateful to J&C Lighting. This chandelier has been in my family for 100 years. Jorge was so…read moremeticulous and careful. He knew exactly what to do and he did it. He rewired, cleaned and polished the chandelier perfectly. Celia found the perfect replacement shade, light and globe as well as matching crystals. They are fair and honest. The work was completed in an astonishingly short time. Thank you so much for giving back to me my precious memories of my family.

This review is 3.5 stars. I brought them a lamp that belonged to my grandmother and is very special…read moreto me. I wanted the lamp re-wired and to be painted. This was done in just a few days but when I picked it up I was told that they didn't put the original pull switch back because the wiring came with a rotary switch near the plug. I was also told that he staggered the lights because it was safer for the glass globes. I told them the lamp was already staggered and this seemed like news to them. I took the lamp home but wasn't happy about not having the middle pull switch. I returned it to have them reattach it. The gentleman showed me a switch with a tiny little chain and told me that it was the original switch. I told him it wasn't because the original was longer and had a ball on the end. He produced another little chain with ball but it didn't look right. I left him to it and it was returned with what I believe is my original pull switch. However, after dropped it off the second time, I was concerned that the integrity of this lamp was being compromised. I called and shared my concerns with Celia. It was a tense conversation and I admit I wasn't pleased. The gentleman was terse with me when I picked it up the second time but I expected that. PROs: The price was reasonable. The paint job was good. They provided the extra screws I requested to hold the globes. They gave me a set of hanging hooks. CONs: He didn't seem to know what the lamp looked like when I first brought it in. Changed lamp by removing the pull switch without consulting me or asking if it was okay. Two of the sockets are askew so the bulbs don't sit centrally. Didn't know which switch was mine when I brought it back and had to provide them a picture. The lamp works and the paint job is great but I'm going to have a friend re-wire the hanging sockets to get the globes in their original staggered positions and to straighten out the sockets. I won't use J and C again but if you're very clear about what you want and document your electronics with photos before you give it to them, you'll probably be okay.

Great service for a contractor best strip lighting and pricing better than high end brand names…read more This is perfect if your buying continuous products for your company and your clients Warranty was simple and stands behind products also knowledgeable about installation process and the blue collor industry

You can find better lighting at Home Depot just buy Hampton bay and you will be more impressedread more

This place is great! Friendly and fast employees, and lots…read moreof inventory. And the best part free popcorn and soda dispenser. GREAT Job GUYS. This is my favorite store. CONGRATULATIONS!

Angel is awesome. Very knowledgeable and friendly service. They have a ton of parts in stock or…read morecan order for a fast turn around.

Always professional, polished and cost efficient service. Amber and Jeffrey are completely customer…read morefocused and a pleasure to work with.

Super friendly staff, very reasonable pricing on lamp repair, would definitely use them for future…read morelamp repair needs. Also, they have a huge selection of items in their store!

Mike did a Fantastic job on our market lites. He n his crew clean neat and organized on time and…read morehave never had any problem in like two years. We had a ton of wind lately and the lights hardly moved. Great company He deserves 10 stars

Mike and his team did a great job with our outdoor lights -- designing, installing, and tying the…read morewhole thing together with a central control. And just as important to me, they were reliable... showed up when they said they would, and were very efficient in finishing the job. Mike was also very patient bearing with us as we made a few tweaks/adjustments after the fact. A very good and easy experience and I will certainly hire them again for my next lighting project.

Miguel came recommended from my slab fabricator and he was great to work with start to finish!…read moreWanted to get our Cristallo backlit and he was so helpful every step of the way! Was also willing to squeeze us in quickly to not delay our slab templating/measurement and came by after his previously scheduled jobs (even stayed until 7pm!) to help get us our LED lighting installed in time. Was so professional, very attentive, and really did a nice quality job end to end! Highly recommend!

I work with Tazz Lighting on all our commercial interior design projects and I highly recommend…read moretheir services. They offer a vast selection of fixtures that cater to every style and budget. Their team of experts ensures a seamless installation, paying attention to every detail and offering suggestions to optimize lighting. They are punctual, professional, and committed to providing exceptional customer service. Overall, Tazz Lighting stands out in the industry for their innovative designs and top-quality services. I highly recommend Tazz Lighting to all my clients and friends.

Despite some issues, and after some discussion, we got beautiful quartz countertops installed!…read more Some of the downsides: communication could be better. My husband walked through the process with the templator and was never informed of where the seams would be placed. The template showed no seams and a solid piece of quartz. At the installation though, we had two seams. I pushed back and requested a reinstall of one of the larger pieces so that it reduced the number of seams from 2 to 1. After some back and forth, we got it installed. I wish the templator made it clear what we were getting and to provide us an opportunity to change it rather than being surprised the day of. Communication with Rebecca at CCM was really clear. She set expectations about what the reinstall would look like, clarified with us that in order to make it one piece it would have to be curved (& not at 90 degree angles). We approved of that, and it turned out great. So happy to have worked with Rebecca and happy that CCM made it right.

If you're planning on a kitchen countertop installation through Home Depot or Lowe's, you'll almost…read morecertainly be working with California Crafted Marble as their installation partner. Ours was through Home Depot, and this review is based on that experience, which was NOT a good one. For starters, California Crafted Marble was supposed to contact me once everything was ordered through Home Depot. After 4 weeks, they had still not called or emailed, and so I had to initiate the process. This general lack of care on their part continued throughout. I had the unfortunate experience of being forced to work with a representative named Lorenzo. I had a number of specific questions about the job, in regard to scheduling and about the installation itself. Without exception, I found him to be rude, almost always condescending in his tone, and on several occasions, he lied to me outright about a number of important details. Any time I'd ask him any sort of direct question, he would invariably obfuscate and be as unspecific and vague as possible. I was genuinely baffled by this behavior, and yet it lasted throughout the entire experience from beginning to end. There were a number of attempts to bait-and-switch with new charges early on that were never part of the original quote, and that only added to my frustration. My experience with the measure tech was fine as was the final installation, however there were issues with the materials as they were prepped. In the one corner where two pieces are supposed to be cut such that the pattern flows seamlessly, the measurement/cut was/is off by 1/4". Similarly, the hole for the faucet was also off by the same amount - 1/4". Because we kept the original plywood from our previous counter, the location of the hole was important, but because the hole was off, we had to bore out the hole wider than the faucet which then required that I create an additional reinforcement piece underneath before it could be installed. Could we have rejected the materials for being cut incorrectly? Sure, but that would have started the clock all over, we would have had to wait an additional 4 weeks and I would have been forced to continue working with Lorenzo. The thought of that was unacceptable to me. In addition, there would be no guarantee that the pieces would be properly cut a second time. Perhaps other representatives at California Crafted Marble are more pleasant to work with, but if your job is through Home Depot, you might want to think twice.