Basically confirming another review that inspired my son and I to use this shop....The service was…read morequality....and instant. It was literally about an hour when my son received the call to pickup the flywheel after being resurfaced....This place is a hidden gem....!

Came to these guys to get my flywheel resurfaced. They quoted me a decent price and finished the…read morejob in about an hour. The end result was a flywheel that practically looked brand new. I would recommend these guys for machine work, quality craftsmanship for sure. Also check out their Instagram for more pictures of their work. Definitely an art to their work.

Been going to Karl's machine shop for years, great service. Rick is an awesome guy. Very good work.read more

It was my first time going to a machine shop to get a Volkswagen AWM 1.8T cylinder head decked…read more Luckily, Rik there helped me out. I didn't know you had to remove a lot of components and pretty much get to the bare head. Well, with his experience, he was able to close the valves and get a good clamp on it so he could get a clean cut on the head. He called me back in a couple of hours once it was done. From the decking process, lots of aluminum material gets into the nooks and crannies. I had to use an air compressor to remove most of the loose aluminum. I was able to install the cylinder head and now that car is running with no issues with leaking from the head gasket. Excellent work and a great price! I'd go back for more work to be done.

I took my horse trailer to get the wiring fixed. It has been sitting for a while and needed to be…read morefixed. T & T had it Tuesday afternoon(they do not start working until 4pm), Wednesday and Thursday and told me it would need to stay the weekend to get a couple more days to figure out the problem. Every time I talked to the owner there were more and more things wrong with it. They said the brake was cracked in 3 places, the welds on the bottom of the trailer were broken, the wiring needed to be completely pulled and redone. They couldn't figure out the 6 pin plug so they switched it to an RV plug. I went and picked it up tonight because I had a gut feeling this was going to end up being a tsunami of cost with all the things they were saying was wrong with the trailer. This is a 4 horse HART aluminum trailer. Only used for gymkhana's a couple mile from home for a couple of years. It came home tonight, way worse than it was taking to them. They charged me $1050 - $250 for each side of the trailer to repack wheel bearings. And $600 for their diagnostic of all of the horrible problems they kept finding. They fixed nothing on the electrical except to switch the plug so the brakes on the trailer stuck and I could move the trailer with their plug hooked to my truck. This was an absolute nightmare. I used to go to T & T to get all my maintenance done. I did not know it was sold. I wish I has known. I am so glad I got it out of there before the could charge me even more. Oh, and the owner kept telling me he had picture of all the problems they found but showed me NONE of them.

This is my experience @ T&T welding on 10/18/2024 I paid…read more$150 to get my High pressure hydraulic steel line repaired, Scott said it was no problem and he will get the job done. Still leaking and I was still charge $150 he stated that his worker was on it for an hour and a half this is unacceptable. Still Leaking Look at the welds please comment .

Go above and beyond for their clients. Doesn't get any better. Experience, professionalism and…read moreoverall abilities are unmatched.

A couple months back I sent Bryon an email to see if he'd be interested in helping me with my small…read morefishing lure business. The job was small and fairly inexpensive so most shops wouldn't give me the time of day. Bryon at DB was the complete opposite. He setup a meeting to discuss my needs and within a week I had the parts I needed. I have since used DB for more projects and the work is grade A. I am very thankful for Bryon giving me a chance and helping me with this adventure. If you need a part made or tool made to make parts I highly recommend talking to Bryon and Anisa at DB.

What stood out the most was their exceptional customer service. Every interaction, whether it was…read moreby phone, email or in person, was pleasant and productive. The quality of their work is simply top notch. The engineering and craftsmanship is evident in the final products. They used a high grade stainless steel material to deliver all of my products which made them highly durable. I will be returning.

I'm sure they are great. I wouldn't know because Yelp doesn't do well with connecting projects to…read morebusinesses. I specifically needed an automotive machine shop but was connected with many businesses that aren't that.

Did a great job on a small weld that I needed. Quick…read moreresponse, reasonable price and quality work Would definitely use them again I hope I don't have to though

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Great work and quality customer service from start to finish. Everything you need from a business.read more

Robert took my emergency order over the phone. I needed custom picking brackets that could be used…read moreon multiple size I beams. Robert designed, drew, presented and quoted late on a Friday. Once approved he had them made, painted and ready for pickup on Wednesday. Big Tool Manufacturing is always friendly and on point. The only company I'll ever use for fabrication.

From the owner: We are a full service metal fabrication shop that can provide inhouse fabrication without…read moreoutsourcing to keep the quality up and lead times short.