Hard to describe how happy I am that I have finally found a shop where I can feel confident and…read moreleave happy knowing that my 2005 Chinook Glacier 2500L is diagnosed correctly, identified the problem, clearly explained what is the problem, time takes to repair and final cost. MARK'S OLD TOWNE SERVICES went the extra mile servicing my beloved Chinook in terms of accurate problem identification, repair time and what I really like is they respect the customer's property. I'd like to give a special thanks to Jose and Marko for the outstanding job, especially technician Marko who did the whole job replacing the throttle body from start to finish. This young man has a vast amount of knowledge for his age and it shows that how eager he is to learn more and more to be the best. Thank you everyone involved to make my rig run like new. Based on my experience I'd highly recommend MARK'S OLD TOWNE SERVICES.

Went there for a Clean Truck check. Spoke with Almir and Jose. They were extremely helpful. I would…read morego there again for sure if I need diesel maintenance

Came in to ask about moving some fog light tabs on the other side of my bumper…read more Frank was very nice and welcoming. He listened to me about my project and quoted me a fair price. I also asked to straighten some bumper horns. Everything turned out great. He finished even before our spoken return time. Super happy with the outcome and work that was done.

All I can say is my expectations were not only met, they were far exceeded…read more 1. If you want an honest business, this is it. 2. If you want to support a family business, and not the big corporations, you've found the place. 3. If you want quality and care on your project, you get that here. 4. If you care about your hard earned money and want a fair price, it's here as well. And on top of all of this, they're personal and friendly. I highly recommend this business to anyone. 10 star business which all businesses should strive to be. Thank you so much! Vince and Stacy

A1 repaired my Moms iron gate, which was improperly installed, followed by 3 yes 3 prior attempts…read moreto resolve the perpetual ISSUE, our issue was the gate not aligning correctly to close. The installers put only one hinge with two screws. This large heavy gate needed far more support. Where others did not or could not figure out the best remedy, Norbert and Cecilia did! When the welder Norbert he explained each step of his plan and HIS PLAN IS BRILLIANT! We are AMAZED AND MOVING FORWARD WITH ANOTHER PROJECT, my Moms back fence.

After searching in the local area, I ended up using A1 Welding for my project and it turned out…read morevery good! It was a semi-complicated arrangement of 1x1 square tubing that formed a structure for our motion simulator. We were pleased with the outcome as well as the service and communication. It was also done in under the estimated time. I would highly recommend this company for any type of welding projects that fall in their scope of work!

Normally I prefer o'reily over autozone but most of the staff here are rude and not helpful…read moreincluding store manager. I came in for some headlights and I asked about their warranty & replacements for headlights. They advised me that I was able to get one replacement but most likely I had blown fuse or electrical was bad. Check the fuses and electrical and they all working condition. The light bulbs sold at oreily are cheaply manufactured and only last 3 months. I switched over to LED and haven't had any problems.

This O'Reilly Auto Parts store is only a few blocks from my home and is usually my go to place for…read morethings I may need for my girlfriends car and for my previous car. They have a big parking lot out front, and whenever I come here, there is usually at least one car with the hood up and somebody fixing something. They have great hours from 7:30am to 9:00pm seven days a week and their early opening time really helped me out today. My girlfriend was set to leave at 9am this morning for a road trip and we discovered the night before that her car was very low on oil. I arrived at O'Reilly shortly after they opened at 7:30am to purchase motor oil. I was going to pick up a few quarts of oil and one extra just to have on hand. Shout out to Rick who mentioned that for only four dollars more, I could purchase a large five quart bottle and have even more extra oil on hand. I really appreciated that since her car burns a ton of oil. If you shop here a lot, be sure to give them your phone number to create a rewards account. You will receive cash rewards once you hit certain spending thresholds. They also have their own branded products which can be significantly less expensive then the brand names. I purchased their brand of Dexos1 certified synthetic 5W-30 oil and it was $7 to $10 less expensive than the big name brands. Today, I was one of those guys in the parking lot with the hood up and topping off the motor oil. Thanks O'Reilly!

I have a turbo downpipe that needed my recirculated dump tube length adjusted and cutting my…read moredownpipe in half to add a 2.5" vband before the bends. I called the shop and spoke to Joey and explained what I needed. He gave me quote over the phone and I decided to stop by. When I arrived I showed him the parts explaining what I wanted to do. Joey said he could get it done by next morning and gave me a final price, which was within quoted price over the phone so I agreed. Joey completed the work as stated and I am overall happy with the work. Will be back when I need more fab and welding done for my projects! Do note that this was labor only and I provided all parts. Pics show before and after.

Where to begin, Our family purchased our first Pop up tent…read moretrailer, a huge step up from our typical camping tent. We were excited to bring it home but noticed we couldn't get it into our driveway. The bumper was to low on the driveway and was getting stuck on the cement. I called around to all the RV stores and for some reason they all recommended ABC Welding in Anaheim. Well here comes ABC Welding to our rescue. Chuck was the nicest guy, very personalable and extremely honest, he told me to replace my hitch to a lower type hitch and that might solve my problem. He could of made a quick dollar off of me but chose not to . I replaced the hitch a week later and it still got stuck on my driveway so he suggested we add caster wheels to the lower bumper to clear the driveway so I brought it back to him and he did an amazing job! A few weeks later I brought back my trailer for a hitch attachment since he did such a great job on my caster wheels. He just didnt do a hitch attachment but a work of art, literally! He changed the spare wheel attachment point directly on to the bumper to accommodate the extra steel to placed to reinforce the bumper. It went from a 30lb. Bumper rating to well over a thousand pound gorrilla rating. This new setup can probably haul another trailer or a boat, that's how strong he built it. Again it's a thing of beauty and structurely superior to other bumper setups I've seen. I can't give enough accilades about this gentlemans skills and business practice. To simply say it, Chuck is Great!

These guys powder coated and sand blasted my threads after I asked them over and over again- not to…read moremention high prices. Lead times are kinda slow too. Leandro's attitude is the worst of anywhere I've ever had powder coat, the guy thinks he can do no wrong. He will ruin your parts, give you attitude, charge top dollar. Lots of good powder coat shops in nearby Anaheim with better attitude, quality and better price. Go there!

Long time customer who just gave up on this place. Owner Leandro only takes easy one color one step…read morejobs. Basic PC shop. Not experts at all in their craft. Disappointing they won't work with customers on custom jobs. Price was no issue here. Just wasn't easy compared to the one step normal job they do but in actuality it was easy.

I contacted several welding services to look at my rusted yard gates, and most of them told me I…read morehad no choice but to replace them entirely. Ismael was the only one who gave me a straight answer, telling me they could be repaired, and provided a very reasonable quote. The team did an incredible job and really focused on the details, from the welding itself to cleaning up the gates afterward. I truly appreciate the quality of their work and their honesty. I highly recommend Mick Welding Inc for anyone looking for skilled and professional service!

Very friendly and flexible. Was able to help me without much prior notice and at a very fair price!read more

I came in because I was having issues with my Jeep starting, I believe there was damage to one of…read morethe cable harnesses amongst other things... Matt and Terry assisted me and it was smooth sailing. I went to a few other places before coming here and the service was terrible. Glad I came here... and I also feel it is very affordable unlike other places where they rip you off. I'll be returning

The best auto repair shop ever. They don't rip you off, and they do great Work. The customer…read moreservice is great. And they do quality work.