A1 repaired my Moms iron gate, which was improperly installed, followed by 3 yes 3 prior attempts to resolve the perpetual ISSUE, our issue was the gate not aligning correctly to close. The installers put only one hinge with two screws. This large heavy gate needed far more support. Where others did not or could not figure out the best remedy, Norbert and Cecilia did! When the welder Norbert he explained each step of his plan and HIS PLAN IS BRILLIANT! We are AMAZED AND MOVING FORWARD WITH ANOTHER PROJECT, my Moms back fence. read more

See all

After searching in the local area, I ended up using A1 Welding for my project and it turned out very good! It was a semi-complicated arrangement of 1x1 square tubing that formed a structure for our motion simulator. We were pleased with the outcome as well as the service and communication. It was also done in under the estimated time. I would highly recommend this company for any type of welding projects that fall in their scope of work! read more

A 1 Machinery & Welding - Metal Fabricators Near Me - Fullerton, California

See all

Needed an Aluminum Intake manifold repaired, A1 completed it and had it back within the week, my Jeep is up and running again.

Very very good job done on my grandmas mobile & very very gentleman whom did the work. read more

A 1 Machinery & Welding - Metal Fabricators Near Me - Fullerton, California

I had a great experience with these guys! Had a technical issue on my vehicle (broken stud) and they were able to fit me in quick, as well as get the job done for a reasonable price. I highly recommend them just from the great communication and pricing standpoint. Will work with them again in the future! read more

Finally found a welder that loves his craft! Made a dumb error on leaving my water paddle board with aluminum handle's underneath my dock. The tide came up and my handle bars bent down! Oof..... on my end. Called this shop and they were so helpful and professional. The owner explained everything in detail and had the job done in less than a day. Anodized aluminum is not something easy to work on. He nailed it perfectly! The price was super reasonable and I can't thank them enough! read more

A 1 Machinery & Welding - Flawless welds! - Metal Fabricators Near Me - Fullerton, California

See all

Needed to fab a battery mount for an e-bike and Cecelia and Norbert took the time to work a solution for me. Very happy with the quality of the machining and weld quality. Will go back for any future fabrication needs. read more

A 1 Machinery & Welding - Metal Fabricators Near Me - Fullerton, California

See all

Thanks Norbert, you really came through. I was in a pickle and he did a phenomenal job.

I needed a stainless fitting for an outdoor heater cut down and new holes drilled to remount it. A1 was able to do it quickly and for a reasonable price. Thank you! read more

Great people. I had an aircraft step that snapped. Because it's an aircraft it needed very specific welds, angles, and curvature that needed to be perfect. They had the skills and did just that and it is flawless. I checked every welder and when they found out it was for an airplane they doubled their charge and said it would take days. When A1 found out it was for an aircraft, his quote remained the same and took an hour. The step is a non critical flight part but helps a pilot get in and out. A1 strengthened the weld and now it can hold a heavier load than before. Wahoo read more

A 1 Machinery & Welding - Great job on repairing the pilot side step. - Metal Fabricators Near Me - Fullerton, California

This company is great! I needed a dresser drawer handle repair and Norbert meticulously made the repair. Not only was it an extremely small and a difficult job, he took it on without hesitation and repaired it perfectly. Cecilia, the owner, couldn't have been any nicer and accommodating in help me! They just are very sincere, nice folks and skilled at what they do. Don't hesitate to use their services! read more

Very reasonable pricing and communicative. Gave me updates by text on my project. Wasn't a metal fab project but I asked him to retrofit a plexiglass mount by drilling holes and milling out some indentations for a different year car air bag control controller. It came out great. read more

Hard working company. Very busy shop but responsive to the need of the customer. Easy to deal with.

I was looking for a machine shop/welder to help me cut an aluminum 1/8" sheet custom bracket for me to mount my custom Moroso Power Steering Reservoir Tank in to my Miata. I drew the template on to the sheet and provided it to Norbert. He not only cut it nicely, he mounted and tig welded it following my instructions. Also shaved off the previous brackets and helped me clean it up. I am extremely happy with the result. Price was fair for the time, effort and dedication to my project. Thanks Norbert and Cecilia! I look forward to working together on more custom projects in the future. Thanks. read more

See all

I highly recommend A1 Machinery & Welding. Norbert reinforced our RV bumper so it would be strong enough to hold the weight of our electric bikes plus the heavy bike rack. It is super solid now. We don't have to worry about it ever bending again! We really love Cecilia and Norbert. They got our motorhome back to us the same day we called them. If we ever need anything welded again we are definitely calling A1. read more

Great job at welding! Really impressed! Brought my Dirtbike in for my rear fender frame came off due to a crash. Called A1 Welding and great costumer service! Texted the photos of the job needed to be done and got a quote within 15 minutes! Done within two days, even the weekend! I'll be back in the future for any welding purposes. read more

See all

I called Friday for an on site repair on an aircraft at my shop. Norbert came Monday afternoon and was able do the job very fast. I am very pleased at their professionalism. Their a small family buisness that puts the customer first. I will definitely be using them in the future. Thank you read more

Needed a part repaired for my entry door on motorhome. It was welded up quick and looked great. Price was good too. Will use for all future welding needs. read more

Definitely recommend this shop. Good turn around time and good pricing. I took my motorcycle in because the one of the threads in my frame were stripped. Dedicated motorcycle shops in the area would've taken a lot longer and cost me an arm and a leg. Norbert was able to drill and tap the hole in under an hour at an extremely reasonable price. read more

Highly recommend this place. I had an aluminum wheel that was cracked and needed to be welded. I requested several quotes from several places ranging from $50 to $180 which wasn't really worth it since I had bought the wheel for $40! Took it over here since it was some what close to my house and he did it for $40! The weld has been holding up well and looks like I've found a bargain of a wheel and my go to welder! read more

I want to highly recommend Norbert for a job custom he did fabricating a kit for a project I had related to my photo booth. I brought all the plans and layout of what I was looking for and he quickly quoted a fair price, was done fairly quickly but more important done very good. The product he built has so far lasted 2 years and I am highly satisfied. I recommend this shop for any welding need. read more

I recently went here to have my antique metal table repaired. The service was terrific and the work was done quickly and professionally! I don't need metalwork done often but I would definitely return here if I ever do in the future! Thanks A1! read more

I went to A1 welding for a little project I had. Cecilia and Norbert were so helpful and finished my project the same day I came in for an estimate. Talk about really great service! No project is too small or big for them. The welds on my project are very clean and beautifully done. I will definitely go to them for any future projects of mine! read more

Awful service!!! I called on Monday morning to inquire as to whether the company could do a specific repair job. I was told to take pictures and email them to the company for a quote. When hours later I still had not received a response, I called back to be told that the boss has to approve this still, but that I should receive a phone call within the next 20 minutes or so. It is Thursday night and still nothing. Obviously they are not interesting or something?? But I would have preferred some actual courtesy of being told this, instead of just dismissed! I would never seek their business if I were you! read more