really terrible work and company to work with. I took a few motorcycle parts here for a custom…read morebike that I'm building. I had to have them do several parts 4 times before it was even usable. They used duct tape to "plug" the fork openings in the motorcycle tripple clamp. It just made a huge sticky mess for me to clean up but the tape had covered sections that should be exposed. Now that I'm installing the parts i've had multiple locations where in just regular assembly (no hammers or force) the finish is flaking off. I can then just keep picking it with my fingernail. I also found that they had dropped my swingarm at somepoint before they powedercoated becuase the hole that my bearing needs to go in was clearly smashed in. Good luck to me getting a swingarm bearing back in a hole that isn't round anomore. There were also several times they told me my parts were ready and to come get them only for me to show up and the shop was closed with no one there. I did get a response when I texted but only to say they had left to go to another job, even when I had confirmed with them what time I would be there. Really bummed that I paid almost $400 for what ended up to be nothing but a hassle and a waste of time.

Poor communication and poor work quality…read more First off they have horrible communication. They hardly ever answer their phone, do not let you know when work is completed and don't communicate with each other what has been done and they don't meet the deadlines they set. I asked them to powder coat motorcycle levers and the work wasn't done right the first time, they forgot to sand down the ends as asked. The prep work was very poor. This was evident with all the uneven surfaces on the powder coat. Once they took them back to correct that, they again missed their deadline they set. They left the levers on the floor because one lever was scratched upon pick up. The employee seemed irritated this was brought up to them and he took the lever, sandblasted it and quickly put it in the oven for 10min where the powder coat didn't seem to cure. I would avoid this place as much as possible. They do not do quality work here.

Great job and timely. Also they were very helpful in fact it was missing a piece from the bracket…read moreand they fixed it as well, I didn't think of it when I dropped it off

Needed a pair of old Powerblock weights welded since one of the pieces broke. The 90lb addition got…read moresnapped over time. Fred did a fantastic job welding them back together. They're now as good as when I bought them over 10 years ago. Very friendly service and great price. Will definitely return and highly recommend!

During a home renovation I needed a mixed metal and wood stair railing. I got quotes from five…read moredifferent metal working companies. Westside Welding is the only company that actually came onsite, measured, talked over the design and other options. His pricing was fair, clear, and definitely competitive with the other companies. Dillon was an absolute pleasure to work with. Top notch communication in terms of planning, scheduling, interruption of work, everything. He sent pictures of the work, he called to talk through options that appeared mid work. Billing was clear, on time and with no overages that I didn't specifically ask for. Dillon clearly takes a lot of pride in his work, and was as excited about my project as I was.

It was such a pleasure to deal with Dillon and Britney - they are kind, responsible and honest…read moresmall business owners. Dillon took an idea we had for our staircase from our descriptions and one internet photo, and made the exact thing we had in mind. They responded promptly when we contacted them and were professional throughout the transaction. They are personable and fun to work with. Their prices were very reasonable, especially after we saw the work that went into the railings. They went the extra mile to make certain we were happy. Dillon is an artist - he took the time and care to make certain the welds were almost invisible, had the metal powder coated, and visited several stores to get the perfect wood for the railing cap. I told him I wanted modern elegance and I am happy to say, imho, that's precisely what I got. We highly recommend Westside Welding Company for anything you might need.

I had a small odd ball welding job that I needed, so I posted my needs on Yelp. JD Welding got back…read moreto me and chatted for a bit and came up with a solution. They were able to knock it out quickly and at a good price, super friendly and awesome to do business with. I will definitely use them again.

Joe went above and beyond what was asked for. I would definitely recommend him for any job.read more

Good job and timely. I would definitely use their expertise again. They repaired a brace that broke…read morepart of a recliners frame.

Always amazing workmanship, value, professionalism, quick turnaround at Kirk Welding. I've been…read moreseveral other times purchasing some angle iron and metal bars for some work and home projects, but I needed something to insure that safety was at the biggest concern and needed some bars welded for some audio systems I deploy for events and these guys delivered. Thank you for the amazing craftsmanship and quality work!

Disappointing experience overall…read more Verbal bid was given of 10k to 11k for the job over a FaceTime phone call as the project was explained. I politely asked if he could please try to keep it near the 10k. Written bid came in over 11k. (11,700$) Discussed that the bracing for the large metal stairs should probably be secured by something more than anchoring into stucco. To add proper supports the bid goes up again to over 12k. (12,800$) I would have liked a more professional experience where pricing didn't keep changing and for Christian to take the lead on making the stairs braced correctly and safely from jump. He kept saying this is simple we don't need to discuss the job so much. Also I had originally texted him to FaceTime me when he was onsite. He was on time but didn't respond to my texts. Had to wait 20 minutes for a response. He already left the job. Had to drive back to the job to be able to Facetime me. It is a large job that involves a lot of safety concerns. Was really looking for more professionalism to have the job bid correctly from the beginning and the scope of the job to be discussed throughly on time to get it created safely.

Christian (Kriz) was amazing to work with. Friendly, listened to the goal and great resulting…read moreproduct. Would definitely use again

The iron bar from the fence to my gate opener sheared off and in order to open the gate…read moreautomatically I needed to get it fixed ASAP. I called the number on the business card and owner Travis was at my house within 30 minutes. The repair was done within 50 minutes. He also noted that I did not have a roller on the bottom of the gate, which accounted for instability when opening and closing. He checked with Ace Hardware and they had the part and he added that to the work request. Pricing was good and he went above and beyond what I thought I needed. Highly recommend and I will use him to finish the last fence on my property that has wooden boards added to wrought iron fencing.

From the owner: Here at Old Soul Kustoms and Fabrication, I take extreme pride in the work I give. As well as…read morecaring for your project(s) as if they are my own. With over 10 years experience with mig, tig , and stick, your project(s) are in great hands. Specializing in hot rods and lowriders i also build custom gates and fencing. Anything metal all the time.

Excellent team. Responded quickly, showed up on time and completed a welding project efficiently…read moreand with high quality.

They responded quickly when I called and texted…read more Communication was a small issue. There was a misunderstanding but they were very gracious about it.

Just had Nicole Welding do 2 gates for inside my house - to keep my entryway "dog free" when people…read morearrive, while remaining welcoming, open and airy. Beautiful workmanship. Victor did a very complete instillation, touch ups and all. Everything was cleaned up before they left. Their metal gates can be inside or outside. Highly recommend. Located in Oakley - but also service East Bay. 925-679-9636