Easy to choose, order, and input information. Our order took 2.5 months, which we understand was due to heavy workload and demand. We were definitely informed of the lengthy timeline to receive our order, so while that seems like a long time, we understood we would be receiving a custom made product specifically for our 2002 Buick Park Avenue with front seat belt holes, headrest covers, front and rear center console covers, and the cutout in the rear seat cover for said rear center console. The material and appearance of the covers is great, it looks like quality material and felt like something that will be very comfortable to ride on no matter the weather, as well as something that will last and stand up to our dogs who ride with us very often. The front seats did fit as described, and the instructions to install were adequate. They were a pain to install due to the design of the fastening system. The design for securing the seat covers is the cheapest I've ever seen. Sections of nylon rope cut (and not cauterized to prevent unraveling, which WILL happen and make threading them through the loops difficult) to somewhat workable length. Not latching clips with tensioners or something reasonable that we saw on MUCH cheaper options. This applies to BOTH front AND rear seat covers. CHEAP CHEAP CHEAP! The front seat bottoms WERE strips of Velcro that secure well, but the wings/edges of the seat bottoms were still to be secured with the same cheap nylon rope. The front center console cover only covers the top, even though the order/invoice specifically says "mini console/lid cover," which I take to imply that BOTH covers are included. I was apparently wrong. The "shower cap" design of the front console cover does not allow the cup holders to be put away in the center console and latched closed, which is fine, unless you need to put the center console in its upright position for any reason. The rear seat covers included ZERO instructions. No hints, no Seat Covers Unlimited install instructions online or in a YouTube video, or anything. We received a duplicate of the front install instructions in the rear seat cover box, which don't help for the rear seats. Thankfully I am mechanically inclined, and am able to do most vehicle service myself. The removal of the seats is pretty simple, but without any information clarifying that the rear seats need to be physically removed to install, you're left sort of scratching your head when it seems to be considered that this is a quick and simple job. Also not possible if you're not willing or able to remove these from your vehicle, or don't have the proper tools to do so. The Buick required a 19mm socket to remove two bolts holding the seatback (and seatbelt buckles) on, and required some decent muscle and working to replace the seat bottom clipped back into place with the cover on (likely made worse by the pieces of nylon rope pulled so tight that they had no more give in them due to their short length, so they resisted allowing the seat bottom to be clipped back into place). The rear seat cover sort of fits, but does leave the top edge of the seatback uncovered (about an inch) and leaves 1/2"-1" of the seat itself all the way around the rear center console exposed due to the poorly measured cutout. It comes off as an "eh, close enough" version of measurement verification for the console and rear seat in general. Simply cutting an "X" to make the center console hole would be much better, since it would then also allow you to tuck those ends into the seat behind the center console, fully covering the seat as most would expect from custom-made, model/option specific seat covers. Again, cheap nylon rope without the ends cauterized is what you must use to fasten the cover to the seat, which is difficult to thread when having to put serious tension on these pieces of rope to make them stretch to the necessary length for threading and tying off. There is also the bottom corner of the seat on one side that is exposed, no matter how much we stretched and centered it. The seatbelt buckle cutouts on the seat bottom are fairly wide, exposing seat as well. It, too, comes off as a lack of verification as to what cutouts need to be made versus "eh, good enough." The rear center console cover does cover the console fairly well, but also covers the storage bin lid that is in the rear console, rendering it useless. Again, a lack of verification of fit and finish for this custom product. Given the price that was paid (nearly $500, or over $500 had we paid retail price!) for custom, model-specific and option-specific seat covers, I would expect high quality material for fastening the covers to the seats, not some sections of barely long enough nylon rope cut from a Home Depot spool, as well as seat covers that truly fit the entire seat(s), rather than seeming to work on getting away with providing as little material as possible for the covers themselves. DO NOT RECOMMEND. read more

Installed in March of '18 but it deteriorated into a flaky itchy mess & fell completely apart by June of '19. I ordered the "Universal Full Size Truck Bench (Front) Saddleblanket - Burgundy", in 3 mo.s the Burgundy had faded to a nasty greenish gold color. It was also starting to leave lots of fibers all over whatever you were wearing. Not the end of the world in & of itself just annoying, but they itch like the whole thing was made out of fiberglass. It was awful. Thankfully, I don't drive the truck very often & could just park it until the weather was better to be out having to go through the whole process all over again. In June I finally got around to going out to remove the Seat Cover Unlimited unit & install a new one from a different manf. As I gripped the corner of the seat (seat, not cover) to move the seat up to begin cutting cords, it literally fell apart under my hand. Pieces actually fell all the way to the floor. It itched intensely anywhere the fibers touched. An absolutely awful process just trying to get it out of my truck let alone the 2 hrs of clean up afterward with a vacuum wearing a mask & gloves. The saddleblanket style seat cover I installed EIGHT YEARS earlier in my Bronco is still performing flawlessly to this day & has not lost so much as a single stitch. Unfortunately I had not been able to find the manufacturer of the unit I had in that truck & tried these jokers. I will absolutely never purchase anything from this company ever again. And by the way, good luck with trying to get any satisfaction through "customer service". I guess it's awfully hard to provide any customer service when you never answer or return calls from the dozen (pleasant, I promise) messages left. Junk product, junk company. Caveat emptor. read more

I received the Neo-Sport seat covers for front seats of my 2005 Honda Element today. On the advice of one of the sales persons, I upgraded to the "Tailor Made". I think this was a good recommendation and they look great. It took me about an hour and twenty minutes to install these. I took my time and actually read the instructions and they were easy to install. One complaint that I have seen in the reviews is that people are reluctant to cut the holes for the headrest. I found this easy to do. I cut the hole as small as possible, and was able to get the material under the retainers for the headrest. the fabric stretches without tearing and the result looks like it came out of the factory. It did take exactly 7 weeks from the time I ordered to the date I received my order. I reached out both via email and through Facebook to check on the order. I really didn't have any expectations on how quick I would get them. Since these are custom made to order, I felt that 6 to 8 weeks would be reasonable. The Facebook response was very quick when I checked on the order last week. Since it has been very cold in my area this winter and today was in the 60s, the timing couldn't have been better.... Also, I did get a notice when they shipped and they got here a day earlier than FedEx ground was estimating. Good thing -rain tomorrow. read more

As a first time buyer online i thought i did everything right until my order came in and it was wrong.i misunderstood the process and was upset about it,i thought i was stuck with my order.when i called in to seat covers unlimited they put me in touch with Madi.not only did she take the time to explain what i did wrong during the order process she worked with me to get exactly what i wanted and she took control over the whole process.seat covers unlimited should be very happy that they have such nice,friendly and professional people working for them such as Madi.i will recomend seat covers unlimited to anyone looking for covers,my father and my four brothers are going to order from seat covers unlimited as soon as the holiday rush is over.i told them on thanksgiving day that they should call and talk with Madi so she can help them with the ordering process.that way their orders will be perfect and everyone is happy.Thank you very much for your patience and your professionalism with me Madi,seat covers unlimited im sure is very greatful to have an employee like you. Thanks again Madi your awsome. Kenneth Gregory read more

I've had my '97 Camry front and rear Saddle Blanket-style seat covers (full-custom fit, map pockets, head rests & all accessories) for over a year now and all I can say is they are as nice-looking now as the day I ordered them! They really WERE worth the cost and the wait. I'm really surprised to see some reviewers had problems installing their covers. I never had any problems with their fit and finish. I knew, however, they weren't going to "slip on like a glove"; they took a bit of time. I unbolted both my front bucket seats from the floor and took my time securing the strings. Same for the rear. Sure, I had to create holes for my head rest posts, but SO WHAT?! I'd rather do it myself and ensure the right positioning than to have a company do it and end up being completely off!! All of my time and labor was ultimately worth it. I have had such nice compliments (even from my teenager's friends calling them "cool") and they have held up to punishing conditions! As I write this review, I am reviewing NEW seat covers for my OTHER Camry and trying to get an idea how well the less-expensive, universal-fit seat covers would fare. But all in all, I surely recommend this company and their products. read more

The absolute worst. I purchased a dash cover for my 2001 Chevy blazer. Got it? A 2001 Chevy Blazer. Then, to ensure that a mistake was next to impossible, I sent a separate email - confirming my dash pad for a 2001 Chevy Blazer. Guess what? After taking $39.95 of my money and shipping the item to me, they sent me a Chevy TAHOE dash cover. After noticing the problem and sending them emails/photos of the WRONG dash pad, take a guess what the 'solution' was? I had to (a) pay for shipping the item back to them (b) wait for them to obtain it and then (c) either issue me a refund or send me another one, having to keep my fingers crossed yet again. And if they screw up again??? Well, I'd have to pay to ship it back to them again. Horrible company. Horrible policies. Horrible business practices. Horrible people. If they remain in business for a long time, it's because they're making money off shipping the wrong items. Already reported them to Ebay as a potentially fraudulent seller. Get this - in one year - they have 18 NEGATIVE ratings and 24 'Neutrals.' Trust them...and YOU take the risk. Awful experience. Would NEVER use or recommend. read more

I'm very pleased with my recent purchase of a pair of front seat covers for my 1998 Volvo S70. The Madrid fabric in taupe proved an excellent color to match the car's tan interior. I took my time putting the covers on so they'd be nice and tight. It took me about an hour, but I could probably have done it in 40 minutes if I'd needed to. As for the instructions, I had no problem with them. They are generic instructions for a variety of different types of seat covers, but I found them quite adequate. The only thing I had to do that wasn't explicitly mentioned was accommodating the knob for the lumbar support adjustment. The instructions did, however, include directions on how to make a neat hole for headrest posts and that told me everything I needed to know to expose the lumbar support knobs so everything looks professional. Friends of mine say the seat covers look like they were factory installed by Volvo. They definitely exceeded my expectations for what was available on the market in the way of seat covers. Thank you, Seat Covers Unlimited. read more

this is the actual email I sent them after installing the front seat set..... This has been a 12 year old project, interrupted by a ruined by dye nice set of factory seats, a total color change I had hoped to finish. Then a complete car change, interior swapped into a,new car, various other black seats that just never fit right, I almost gave up and sold the car because it was killing my back, finding your website, saved my little car! I am back in another nice correct factory seat, your covers look and feel better than what came on the seat. Thanks a lot!! Being used to being let down my almost every aftermarket product I've ever bought, I could not be happier with the product you sent me, thanks for saving my little hotrod! I later purchased the set for the rear, while installing, one of the tie off loops ripped the backside of the rear backrest, sent them a pic, within TWO DAYS, they sent me another, these covers are a THOUSAND times better than I had ever hoped... now I tell people i drive a LUXURY sports car!! read more

The only reason I gave them a 4/5 is because it took so long to receive the order. I feel like there should have been a notification prior to completing the order that stated they were 10 weeks out on their orders. A banner on their website, perhaps. But that being said, once we received the seat covers and installed them, we loved them! We got the two toned gray canvas and it looks great. The material is super durable and even has a nice cushion built in! The fit couldn't be better, especially considering the material is so thick and heavy duty. It stays in place and doesn't slide around on the seat. Couldn't ask for more from a seat cover! The customer service was great as well. When you call, you actually get someone right away and they know what is going on with your order. I called twice because I had ordered it as a birthday present and the customer service agent told me exactly what stage of production it was in and how long it would take to finish. I was really impressed! read more

I am so happy with our purchase. We have an '07 Highlander with leather seats. We moved from the Midwest to the South and the heat has been brutal on the leather. We purchased these covers in hopes for a remedy and they far exceeded our expectations. We only needed the front two seats but will probably purchase covers for the back two rows because they are beautiful. They fit very snug, are so much cooler to sit on than the leather in this heat, and were very easy to install. As a business owner, I believe they are fairly priced, maybe a little more expensive than others, but we got what we paid for and are happy. I think that some people who write these poor reviews really believe you should not have to pay for products and that everything should be inexpensive. 1 star reviews are hard to get over but I am glad I gave them my business and my 5 star review. I did not have to utilize customer service so I cannot comment on that. read more

It's the only company I could find and willing to do the 2nd, 3rd, 4th row seats of my 2018 MB Sprinter. During the order process, I made them *(Nicky) promise over the phone that the covers will be done and shipped in 4 weeks. Nicky kept her promise, they arrive just in nick of time. I only had instructions for the 1st row, however it was so detailed and "dummy proof" the rest of the rows were easy to install. The covers were tight and the fitting and installation for the back seats would have been a challenge. The colors blended very well with my interior as well as exterior. The leatherette material seems to be of high grade and very thick. If there is any complaints I would say the wrinkles on the material but that happens during folding and shipping the covers. Time will help it . I'm impress with this company the 4th seat cover manufacturer I had to deal with within 20 years. By far the BEST! read more

What can I say other than a fantastic buying experience. Prior to my purchase I had a quick question, sent an email and within a few short hours they responded. I placed my order and 3 weeks latter I had another question. Same great response. Folks this product is made to order and for very good reasons! For one, their products are light years better than the junk you buy off the shelf. Secondly the materials they use are top notch. Nothing cheap there. They're made to last and my guess is that they will last at least 20 years or the lifetime of the vehicle... Or longer. The workmanship being done by hand is extremely impressive. They take a few weeks, unless you pay for expedited service. What a great small business in Arizona doing very big things. I wish then all the best and much success. My friends and acquaintances will hear of Seat Covers Unlimited. read more

New upholstery for my '61 Ford Ranchero with a split-bench seat was estimated at $450.00 to $650.00. I opted for seat covers. I found Seat Covers Unlimited and found their prices very reasonable. I have the worst luck with ordering things on-line, but I committed to a custom fit order for $168.00 to arrive in 3 to 4 weeks. They arrived about 10-12 days later. I was worried that the seat covers would be low quality and sheer to save money and shipping cost. I was very pleased to find the seat covers were medium to heavy duty. They took about 45 minutes to install. I test drove my Ranchero to see if the seat covers would slip or float. They did not. They remained secure. The covers are attractive and look professionally. They were a snug, custom fit over my original seats. I'm a happy camper. I recommend Seat Covers Unlimited as a safe bet. read more