My mom had an old metal garden table and chairs that had ugly, flaking, chipping paint. She called…read moreSandblast America and asked if that was something they could help with, and they gave her a quote that was in her budget, and were really flexible around timing. They stripped the old paint off, put on a base coat, then a green powder coat. They did an excellent job, and it's really transformed the outdoor sitting area in my parents' backyard. They were easy to work with, and got the work done on time and at a fair and reasonable price. We'll absolutely go back to them if we have sandblasting / painting needs down the road.

I came by with a particular project for the guys at SA. I got to speak with the manager Chris and…read morehe assured me that what I wanted was absolutely possible and he gave me a realistic timeline for completion. When all was said and done, Chris and his team did a phenomenal job on this lever buckle, I could not have asked for a better job. Their quote for this project was also considerably less than the local competition. I would highly recommend Chris and the guys at Sandblast America!

Got my coworkers sons KTM 50 frame and swing arm aswell as other pieces done in orange and black,…read moreexcellent quality and fair pricing. I will be bringing more bike frames soon for sure.

From the owner: Local powder coating shop with an eye for details. Message, email or call to set up a drop off…read moreappointment or quote today! Our services include: -chemical stripping -sandblasting -powdercoating -cerakoting -hydrographic dipping -wheel curb rash repair

Can't say enough about American Stripping. They have done a lot of work for me over the years,…read morestripped and painted a brass and iron antique bed to stripping and painting a set of antique garden furniture. They take great pains to insure that you are satisfied with the finished product. They are top notch professionals. They are very reasonable considering the amount of work that is required. I drive over an hour to avail their services. You will not find a better company for this type of work.

Great place for blasting and powder coating!…read more Very cheap and quality work. Had them blast and powder coat some headlight brackets for an older car. They ensured all the screw holes were plugged before paint Quoted a 5 day turnaround but finished in 4 Also very welcoming staff

Brian contacted me and made good on my request for service provided. Blasting entire car on-site.read more

From the owner: Green Clean is your Faster,Cheaper,Cleaner,and Greener alternative to other media blasting…read moremethods.We do surface preparation others cannot Metal,wood,fiberglass,concrete,asphalt, and we are Eco Friendly. Using less water, No harmful or toxic chemicals, and we use recycled glass as our blast media that implodes on impact having a zero impact on the environment

Darryl and his team are professionals at what they do. Never had an issue with any of his work…read moreand he stands by it. Large selection of colors for anything I need. Always friendly and willing to discuss your project in detail before any work is done.

Excellent powder coating shop. The owner, Mr. Cooper, does a great job and has the knowledge and…read moreexperience to make sure that a job goes right. First, powder coating needs a perfectly clean surface to ensure that the electrostatically charged "paint" adheres to the metal properly. Some shops only sandblast before coating - but this shop uses some extra processes (not just degreaser and alcohol) to make sure you get perfect adhesion on bare metal. Since the owner is intimately familiar with auto body repair and he knows what happens down-stream from his shop, if he's priming something he's going to make sure it's done right for the next guy. He also does finish body work - and does it well - so the thing is that he doesn't just know what happens when he has the product but he understands where the product is going and what needs to be done to it. Whether you want your wheels, car parts, or even yard furniture powder coated, this place is probably the best in the area - hands down. And you'll find that you'll get excellent service and excellent turn-around times on what you send in. It's convenient to 95 and Route 1 - and easy to get to if you're coming off I-95. Great shop, reasonable pricing, and outstanding, uncompromised quality.

Soda Blasting is a relatively gentle method of paint removal. Faced with the prospect of working…read moreoverhead with paint remover on a 32' hull, we asked around at our local marina. Mike's Soda Blasting was wholeheartedly recommended by three different people. I contacted Mike, and told him were were concerned about the integrity of the epoxy layer under the bottom paint. Any physical paint removal has the potential to go too deep, and he promised to "gentle" it. Mike was interested, gave us a quote, and surprised us by the quick completion of the job. It is everything we had hoped for, with a freshly exposed barrier coat waiting for the bottom paint. Mike was careful to avoid removing the barrier coat. While any blasting has the potential to reveal unexpected defects, we wouldn't hesitate to recommend Mike to any boater in the "near Annapolis" area needing surface prep.

Had Mike soda blast my 1977 Catalina 30. Turned out it had a thin coat of barrier coat, so except…read morefor a few blisters to clean up, the bottom is now in great shape and almost ready for bottom paint. This saved me a month of weekends and a really sore back. He tented the boat, blasted the bottom and cleaned everything up in about 5 hours. I couldn't be happier. I would recommend Mike to anyone looking to clean the bottom of their boat. Reasonably priced and one hell of a nice guy. Personable and professional in every way!

I dropped my motorcycle rims off 3 weeks ago for powder coating. The original color I wanted was…read moregold, but Gary the owner spent 10 minutes explaining that he was never able top get the color right and in the end it looked bad. So I agreed with flat black, that was 2 weeks ago. Called him last week only to be told he was just starting to work on the wheels. All this week I receive no phone call, email text or anything. I drop by his shop and find out that NOTHING was done to the wheels except strip them. I will never do business with Gary Lamb or Extreme Powder Coating nor will I recommend ANYONE to use them. I got my wheels back and took them to AMERICA STRIPPING In Manassas. No back and forth on the colors, no excuses and this company has standards that EXTREME apparently does not know about when it comes to coating wheels! Visit ASCOWEB.com and see their gallery, give them a call and you will be pleased with actual Customer Service.

Have had several outdoor furniture items powder coated here over the years. All are perfectly…read morerefurbished. Gary and his team know what they are doing and they do it consistently well each time. He has a color palette with every imaginable color, shade or tone so you can tailor any project to your individual tastes. If you need help understanding the process or what's involved just ask. Expect an articulate informative response so you can make a more informed decision on how to proceed. Out with the old. In with the new. This powder coating rules.

Here's how my story starts…read more I ordered (what I thought were) higher-end sun louvers for the rear window of my car. The mount plates for the louvers came unpainted, which wasn't good. I tried painting them myself but spray paint was not a long-term solution. This is where Eurobeatwheels comes in. I put out a request to those who do powder coating. EBW responded with a reasonable quote, I brought them over, and recently picked them after a few weeks. (This was not a rush order, I didn't plan on mounting the louvers for a while.) They actually charged me less than the quote, which may have been because it was a small project. With that being said, the very fact EBW took the job makes it more likely I'll be turning to them for additional work, such as powder coating the sun louvers themselves this winter. And, of course, probably the wheels for a semi-classic car I keep touching up periodically. Thanks!

I got a quote from Rob for bent wheel repair starting at $180…read more On March 27, 2025, I dropped off my wheel with Boris, who had reopened the shop. I emailed Rob on Monday, March 30, to let him know I had dropped it off. This was his response: "No problem, thanks for the heads up! It will be ready for pickup by tomorrow. Thanks." When I returned the next day, Rob's coworker rang me up for $300. I told him Rob had quoted me $180. Rob then told his coworker $200, and the price was lowered accordingly. However, I was also pressured to leave an online review. This was my experience dealing with this company, and it will be my last.