I wasn't sure if they would take in my simple job as they seem to do very complex machine work for…read moreengineering companies (saw certificates of appreciation from companies like Boeing and NASA). I thought they would scoff at my request and send me off. However, that wasn't the case at all. I just wanted some holes drilled into my aluminum ice scoop to let water pour out as I scoop. The machinist who helped (I think he was the owner) was very professional and asked me about how I wanted the design of the holes to be. There was no waiting-he just did it right there on the spot. Took his time to really measure up where he wanted to drill the holes on the press and also took time polishing each hole. The attention to detail was impressive. Thank you so much! I'll be bringing more ice scoops in the future!!

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

During these rainy days I had to get my windshield wipers replaced, stopped by and they offered…read moresuper affordable options and in less than 5 mins I had paid and had the wipers installed. They were quick, affordable and super friendly. Would definitely recommend going here for all your car needs!

Good affordable parts compared to other auto parts places can't go wrong recommend it!read more

I broke a bolt on the seat collar on a bike that is only a month old. I tried extracting the bolt…read moremyself and I am sure I only made it worse. Since I was not getting an immediate response from the bike manufacturer, I brought the collar to Mitchell Brothers and Brett was able to drill out the broken bolt but had to replace it with a nut and bolt due to my handling first. Brought the part to the bike shop and now I can ride the bike again. Thanks Brett!

Mitchell Bros machine shop is absolutely fantastic. There is no job too small for them. My…read moretelescope tri pod fell over and broke the mount. The metal wasn't your typical material it was more like pot metal. Mitchell bros didn't even flinch! They welded it back together, and its stronger than ever. Oh, and did I say it was a one day turnaround. Staff is very friendly and helpful. It feels like the old days where everything was done on a handshake.

He was willing to do a small welding job for a broken chair. I brought the broken piece to him late…read morein the morning, and he had done it by early afternoon the same day. I would definitely recommend this place for any welding service. I wasn't sure if it was worth welding but his price was fair so I had nothing to lose.

I happened to find this wonderful welding shop quite by accident, but I am glad for the great…read moreresults the opportunity provided. Over the holiday, our stainless-steel sink rack broke in a few places, which made the rack less functional. I brought the broken sink rack to Bryan's shop to ask if it could be fixed. Though he was very busy with multiple job orders and phone calls, he made time to answer my questions, and assure me positively it could be repaired. I appreciate this greatly, as I was a "walk-in", without an appointment or a prior phone call; since I was going to "see" what was possible by showing the item, instead of trying to explain on a call. Bryan then said, "If you'd like to wait, I can work on it now." Wow. Did not expect such prompt service and direct action to my inquiry. Outstanding! Suffice to say, the sink rack was totally repaired, better than new, with a very happy spouse and home as a bonus. Bryan took additional time to have a short chat with me, and though I just met him, I feel as though he's the great supportive and helpful friend I've known for many years. Very honest. Great skills; he welded better than it was when new! Very fair, caring and exceptionally customer focused (though understand he is a very busy man, with multiple due-dates and other obligations, so keep this in mind.) If you need a welder, Bryan is the best!

Robert took my emergency order over the phone. I needed custom picking brackets that could be used…read moreon multiple size I beams. Robert designed, drew, presented and quoted late on a Friday. Once approved he had them made, painted and ready for pickup on Wednesday. Big Tool Manufacturing is always friendly and on point. The only company I'll ever use for fabrication.

From the owner: We are a full service metal fabrication shop that can provide inhouse fabrication without…read moreoutsourcing to keep the quality up and lead times short.

Great quality and friendly service. Prices are fair but you get what you pay for- highly recommendedread more

I was recently looking for a new machine shop in the area because my old machinist retired at the…read morebeginning of the year. After trying Primos machine shop I was very pleased with the machine work and customer service he provided. It's been a few months now and all the cylinder heads I've taken them have came out perfect every time. Definitely recommend

The employees were very nice. The owner refused to drill a simple hole on a fly wheel.read more

After an aggravating search for a bolt that would fit an aftermarket motorcycle part, needed to…read morecustomize that SINGLE BOLT HEAD. Found this listing on Yelp, walked in, and The Boss Man immediately machined the bolt to fit my needs. Great, accommodating service...saved me! Thanks again!

I decided to give Engine Supply a try after my previous engine developed a major oil consumption…read moreafter a rebuild. I have yet to disassemble and determine the cause on that engine. I needed some cylinder head refresh work done on a replacement engine and took my head here. It's for a bmw s54 engine. I understand Engine supply does a lot of domestic work but will also do European and Japanese engines. After speaking with one of the guys, I found out that it's a family owned and operated company. The guys are definitely knowledgeable. The cylinder was picked up and was in great clean condition as expected by a good machine shop. What impressed me was they took me to the back to show my cylinder head during assembly when I dropped off my valve seals. The shop is well organized and clean. When I picked up the cylinder head, the Machinist who worked on my cylinder head also mentioned that the valves were returned in the exact order it was removed, which makes putting the shims I removed back it the same order easier to adjust the valve clearance on assembly. The cylinder head was assembled back into the used block. And is now running in the car without any oil consumption. It has done multiple track days without issue. I'm very happy with their work and can vouch that you are getting top notch quality work. Thank you Engine Supply Team! -Clarence

Decades of experience and quality work. I have used them several times and they know BMW motors.read more

Vance and the crew do exceptional work for a fair price. See them, they can help you.read more

Very pleased with the machine work done on our 2008 Volkswagen Tiguan which unfortunately required…read morea valve job because the prior owner did not change the timing belt. The owner Vance is very knowledgeable and helpful in answering all of my questions. They were able to finish the work in only 7 days and used only original German parts. Needless to say my family is very happy with the great service we received. Highly recommend to all my friends and family.

I reached out to Laser Innovations via Yelp Projects for a custom fabrication job. I just needed…read morethree L-shaped steel brackets, powder coated black, for a DIY walk-in closet build. I don't have CAD skills myself, so it was important to find someone who could help draft the design and stay within a budget. I sent them my dimensions and a mock-up drawing, and Kevin responded quickly with a quote and instructions to follow up via email. From there, Larry took over and let me know that their minimum charge is $100, and the job would take about 7 days to complete -- including cutting, bending, and powder coating. They do outsource powder coating, so there was a short wait while they batched orders together, which I expected. Once the brackets were ready, I stopped by in person for pickup. There was a small mix-up when we arrived, since they're used to working with POs for business orders, but even though mine was a personal project, the staff quickly sorted it out and got me taken care of. The final total came out to $100, and to my surprise, I received four brackets instead of three. The quality was excellent, everything matched my specs exactly, and I was finally able to complete my closet setup. The whole process was smooth, the team was professional, and the turnaround time was reasonable. Would definitely recommend them for custom metal work (even small orders!). Very happy with the final result.

Anything you need cut, Larry & Kevin will make it happen. Top of the line equipment. Very impressed…read morewith the staff & extremely knowledgeable. Don't let there kick back style fool you. These guys know what they are doing!