Josh provides the customer service that is beyond expectations, especially these days…read more Had some trouble with the hand brake on my 2007 Road King. I picked up a new piston and was having trouble replacing it myself. By luck I ran across his shop. Reached out and he was incredibly responsive and accommodating. I brought the brake master cylinder into him, went to the store down the road, came back and it was fixed. He gave great suggestions for bleeding the cylinder and then the brake lines. Brakes are back to normal. All good.

This shop will make you forget the dealer and their overpriced T shirts. This is where to take your…read morebike for service, upgrades, and repairs. If you want to be treated like a valued customer, take your bike to a small place that's focused on good customer service and good craftsmanship.

I would not trust my 911 Carrera 4 to anyone but Tony and Dave. They are consistent, trustworthy,…read moreand do excellent work.

Dave Bergman is not only the most fair, honest and trustworthy mechanics I've ever met, he a genius…read morewhen it comes to diagnosing and fixing vehicles. Every experience and interaction I have with him even more so confirms that as long as I live within striking distance of his shop, I'm not taking my BMW to anyone else for service. If you get an outrageous estimate on repairs for your vehicle that just don't seem to pass sniff test, take it to Dave. Had my late model BMW state inspected and the shop I took it to told me it needed a laundry list of expensive repairs to pass inspection to the point I was contemplating replacing the car. A colleague referred me to Dave and all the costly repair amounted to leaky hoses and loose fittings. End result was repairs costume a fraction to the initial estimate plus he diagnosed a few other easy to repair issues along the way. Take your car to Dave at Bergman Autoworks, you won't be sorry.

Chuck is the freaking man. He is honest and punctual and helpful. He came to our place to do a…read morediagnosis on our Deere which hadn't run in like 8 or more years. Ended up, we needed a new carb. Since we are selling the mower, we didn't want to invest a lot in repairs and asked Chuck if he thought the job was something we could do on our own. He gave us some advice and we decided to give it a shot. We just installed the carb on our own and fired the mower up! Of course you will pay Chuck for his time and we did so gladly. But we appreciated that he knows we aren't all rich and might just need a little guidance so we can save a little money and do the job on our own. It is an honest man that helps his fellow man like that! They don't make people like him anymore! Many thanks, Chuck!!!!

I don't understand Chuck. He repaired our community snow thrower a couple of times. About a year…read moreago he did a repair and we had a problem within the warranty period. It was during a snow storm. I called and emailed him repeatedly with no response. So we had to pay another company to fix it again. I posted a negative review (which I hate to do). Chuck finally called me back and apologized. He said if I remove the review he would do our next fix for free. So now I need a repair. I've been trying to reach him for about 3 weeks and again no returned email or call back. Unprofessional.

Great communications. Looking out for the community for…read moresure! Haven't tried them yet but surely someone should!

ad says they do auto repair, but the rude man on the phone informed me they don't. i was surprised…read moreof such a rude person doing mechanic work.

I use these guys every year and my Toro is over 10 years old and runs like new. They are thorough…read moreand helpful, and take pride in their work. The fact that they come to your house and do the work is a major bonus and the cost is extremely worth it.

Not only did he fix my problem quickly, but he also explained everything to me and helped me…read moreprevent future visits by going over maintenance.

I needed the camshaft bearings replaced in a Ford small block 302. Larry was able to do it same…read moreday from my dropping it off. He moved locations and now does the work out of the shop at his house instead of the previous business location. He is friendly and happy to share his 50+ years of experience building motors. He said he doesn't do full builds of motors any longer, but he does do work on rare and unusual motors for customers still. Don't expect high tech equipment, but you won't go wrong with someone who has a lot of experience with a variety of motors.

Very happy. I…read morestarted out calling a couple other shops asking for a quote on prep for me to rebuild a motor. The other shops all wouldn't even talk to me - no one wanted to do the prep work and let me rebuild. Afraid and want to cover their a$$ if something goes wrong with the motor. Then I found larry just down the road from me, and called him. larry and i discussed what i wanted to do and he sounded excited to help. He asked for an hour to come up with a plan. He called back with a list of things he thought we should do to the motor - i started writing and after about 15 minutes and a full page, he was still talking. Quote for the labor was about 500 less than i was expecting, and there were a lot of steps I didn't even know needed to be taken. The motor was out of a 1970 TR6. Larry walked a total newbie through the whole process and made me feel very involved and let me learn as we went. My work was quoted at a rate when we started - it wound up being within a couple hundred of accurate. And larry let me throw in some extra parts for clean up in his tank for no charge. Larry also ordered all the parts for the rebuild for me - I know there was a slight markup on all parts as opposed to what I could have ordered them for myself, but it sure was easier having the man that did the prep work order the stuff and make sure all of the right parts are ordered. He also test fitted the parts and made sure everything that was shipped to him was in spec. I learned a lot, and was thoroughly impressed by the whole process. They clearly take a lot of pride in their work - everything they worked on looked absolutely brand new when they were through, and this was a 40 year old motor. The other comments about the building being old and falling down - it comes down to taste. I think it is perfect. And the shop does engine work, not exhaust work. I did ask him about brake rotors, and he sounded fine doing that work for me, too.

Kurt is fantastic. Will not try to tell you that you need things that you don't need. Went to two…read moreother highly rated shops who wanted me to spend $4000-$7000 on "mandatory" repairs on my 17 year old car. Kurt gave my car a complete check and found that most of the things the others "found" were not needed (but because I asked about those items, the others decided to "fix" them anyway), plus he found a few leaks that the others did not. Overall, came away at just over $1500. Quite a difference. Hard to find an honest mechanic in this area, but Kurt is definitely it. Will be coming back to Kurt for all of my future work.

My car had failed stare inspection for a wheel bearing. Kurt was able to get in and out fairly…read morequickly but he also recommended for him to see why it was running rough. I was aware of the issue but said screw it you're already working on it go for it. He found out a fuel injector wire was frayed and needed to be spliced and repaired. He did so and now my vehicle (1994 Landcruiser) runs better than ever! Definitely recommend Kurt if you're in the area. It'll be a long wait wait, but he's a one man operation. Very honest and reliable.

These guys were great to work with! I asked them to build me a custom fire pit, and they worked…read morewith me to pick the font and images that would look the best. The whole project was done early and I now have the highest quality fire pit that I've ever seen. The design makes it much easier to light and to clean out ashes than my old one. We now have a great time roasting s'mores with the kids over our new fire pit!

I had a small job on a metal chair that I had almost given up on but decided to give it a try with…read morethis business. I made an appointment, waited 20 minutes, and got my chair back working perfectly. Very pleased with the work, the price and the attitude!