We had an office chair we liked, but one of the legs was "off". Morgan Steel adjusted and re-welded…read morethe joint and all 5 casters are now level. Good work, fair price, obviously a "working" metal shop. If we need anything else done, we'll be back!

My wife and I could not be happier with the construction quality and design of a custom metal…read morerailing we just had installed on a stepped sidewalk approaching our home's entrance. My expectations were exceeded, as this railing a definitely a notch above any of the typical iron railings seen on most properties. Moreover, Brandon was very receptive my design preferences and easy to work with. I highly recommend AC Custom Metal Work.

I had a really good experience getting indoor and outdoor railings with AC Custom Metal Work…read more From start to finish the team was very quick and responsive. They answered all my questions, and came back with a reasonable quote and very quick lead time for production. Railings were installed with care and great attention to detail. The end product was high quality and exactly what I was hoping for! Highly recommended and a pleasure doing business with.

Had a project that I needed assistance with so I took it to Allied Steel Fabricators and they were…read moreexceptional from beginning to end. Thy immediately took interest and got me exactly what I needed. Very grateful to have this kind of business in our community!

The guys at Allied Steel (Medal Hangers) produced an amazing piece for me to hang my 6 world majors…read moremarathon medals. It was completely custom job made with my times for each marathon and the dates. Joel and his team sent a pre-production mockup photo for approval and were very quick to communicate during the process. I think these laser cut stainless steel medal holders are undoubtedly the best value for the money and totally made in the USA!

I was referred to Aries by a friend who raves about how amazing they are. We needed some custom…read moremetal fabrication done but could not find anyone that could make it from our drawings. The folks at Aries did everything. They redesigned the parts, made new drawings and fabricated all of it perfectly. We will definitely use them again.

From the owner: Aries EFD is a product, Engineering, Fabrication, and Design firm headquartered in Bremerton, WA…read more We offer professional services in concept design through product delivery.

I've done a lot of work with Cross Sound Machine over the years and they always impress me with the…read moretop quality and excellent service. Rich is a very talented machinist & welder with a very high level of integrity. The photos posted here show the custom-made handrails he fabricated for my house. The complex angles, especially where the parts intersect, were challenging, but the end result was flawless.

DO NOT GO NEAR THIS FOOL My question is this: Rich if you…read moreforgot, or did not understand the project, why did you not call us to confirm? You had our number right in the box with the injectors. We would have emailed a scanned sketch or a CAD drawing immediately. You initially verbally agreed to and understood the project. You ruined one of a matched set of 6 vintage injectors by randomly grinding it down. Now you will not make it right by replacing what you ruined. Shame on you.

Back in October, I had gotten ahold of Jeremy Loerch, at Monkey Wrench Fabrication regarding a…read moreunique request. We had removed an old rotting deck from our house, deciding not to rebuild it. There were several issues that don't matter here, but the decision was to replace the siding on the house and to maintain the light in the daylight basement, so no deck. Which then left me with a secondary issue, how to keep people from opening the sliding glass doors we have upstairs and stepping out into the abyss. I spent a lot, and I mean a lot of time, on Pinterest trying to come up with a solution. I finally decided on a Juliet Rail, that we could attach to the frame around the sliding glass doors. I found a lot of ideas, but nowhere to purchase anything, that wasn't a ridiculous price or had ridiculous shipping costs. I really wanted to find a local artist and support a business on Bainbridge. Plus, I couldn't find anything with that "je nais se qua" that I was looking for; something fun, useful, whimsical, and solid. After my FB and google searches, I found several places and called each. I got a good vibe from Jeremy and he seemed interested in my project. So, we set a time and met at the Forge. He liked my idea and I gave him full license to play. We discussed costs and powder coating and shook hands on the deal. By the way, his partner, who I met each time was the sweetest baby, total side note. Anyway, the cost to powder coat was more than he anticipated, and we shared the extra cost, yep, he honored his word, he asked for a bit more due to the unexpected extra cost and we split it. He also came out and drilled the holes when we were ready to install, all with a broken leg. Seriously, I was floored. The quality is solid, and the aesthetic captured exactly what I was looking for. I love how the reflections of the iron and the trees co-mingle. And, I love that he took my idea, and played. The work was done on time and at an affordable price. I am super happy that I met the Monkey Wrench Gang. I love my Juliet Rails. Thank you for the excellent experience.

I requested powder coated legs for a coffee table I was making, and these guys did an excellent…read morejob. They were able to powder coat (if I was willing to wait to combine with a larger job) and fabricate for half the price of any other place I called, at 10/10 quality. Highly recommend if you're looking for a no-BS great quality fabrication

Home generator had a bad flange on the muffler exhaust. I took it to them and after some…read morediscussion, the guys sifted through their parts bin, found an acceptable pipe piece and welded it to the exhaust port, stiffening and sealing the prior leak I had at the flange. Oh, and I dropped it off ~2:30 on a Saturday...they called at 5:30 and said I could pick it up anytime. Same. Day. Done. Right. Wow...don't get that kind of service these days except for here! Now it wasn't a complicated job versus other items they do, but in wrapping up their work week, they squeezed it it, did it perfectly and the problems are fixed. BIG thanks for Logan for the work and for the owner Bill to sliding the job in there. Many thanks - aloha!

We needed a hitch put in the back of our RV but it involved replacing or removing the hollow…read morebumper. We had quotes from other shops for up to double what we paid here. Plus they did a fantastic job on a timely basis. They actually did more than we expected by reinforcing how the bumper was attached to the frame and how the hitch was secured. On top of that, these are genuinely nice people. We have a couple of other projects and we will go back to them Highly recommend.

I wish yelp had 10 stars, I would award it to these guys. I have been looking for a shop with good…read moreservice and quality for small jobs for my house. I've had steel shops overcharge, even had one fake hours across the canal in Ballard. I found these guys by chance to cut a steel piece that another shop couldn't do on a random walk in basis and they didn't even want to charge me for the work, just said to remember them next time. I sure will remember them. They were friendly, they showed me around because I was curious about some of the equipment, then when I went to wait, the whole office asked if I needed any help, and so I just donated money to their happy hour fund because I was so impressed. I wouldn't go anywhere else.

I have worked on several projects with PacFab. They have always delivered on time and below budget…read moreon every project. Their attention to detail is second to none. It starts with their engineers and the fact that they employ some of the best metal fabricators in the PNW. Very professional... I just can't say enough.

Aaron is a very professional and well-qualified mechanic he handled the job very well and I am very…read morepleased with his work well worth the money

I needed a truck bed crane installed in my pick-up truck so I can load my generator when we tow our…read moreFifth Wheel RV. I needed it to be attached firmly to the frame of the truck, not just to the sheet metal of the bed, which would not be strong enough to lift the generator without damaging the truck. Aaron responded promptly when called. He took his time trouble-shooting various possible solutions, and came up with a simple, inexpensive plan. He returned today and did the job in a couple of hours, including welding, and then stuck around and assisted me in load testing of the crane. Crane works and stows beautifully. SO, Aaron did not only did excellent work, but brainstormed with me for a solution unique to my circumstances. I will be hiring Aaron again soon for some other projects, he was very easy to work with, and stayed within his estimate which was reasonable to begin with.

No response follow up after the initial confirmation of request. I got a text & email to fill out…read moreinfo. I sent the form in, and nothing since.

Lucas and his team are reliable, responsive and their work is top notch. It doesn't matter the…read moresize of the job they go above and beyond delivering the best service and quality work! Highly recommended!