I contacted Thorsten from seeing his AD online and called him immediately…read more He specializes in Turntable repair and tune ups, and me being a DJ i just had to check him out. he is very professional. He gave me a quote over the phone, and even worked around my schedule (at night). He replaced mt RCA cables on my Technics 1200 with gold capped cables, and even re-wired the ground internally. at an amazing deal. I am very impressed and definitely will work with him again.

Called Thorsten and he picked up right away....he diagnosed my Technics SL-235 Turntable right over…read morethe phone (the platter was not spinning). He walked me thru checking the belt below the platter, it had slipped off because it was stretched out...no surprise on an approx. 40 y.o. rig. He found one in his inventory and I did a drive by to his place in Hermosa. In 5 min. he had a new belt on for an amazing price. He did not charge me for the diagnosis or labor either. He also helped me figure out what to do about a single play spindle that was too short for this table. Great experience and dedicated fellow to getting old gear back up and running! Will use again for any other vintage gear.

Charlie modded my Switch OLED and could not have been more professional. I came across his services…read moreon OfferUp. He was punctual when it came time to meet up, kept me updated throughout the process, and was even able to save files on my memory card that I thought were long gone. He also provided me with a link to a helpful tutorial afterwards. I can honestly say this was the best OfferUp experience I have ever had. Could not recommend his services more!

Great service and quality work from a seasoned professional! Charlie modded my OLED switch and was…read morevery flexible with drop off/ pickup times. Turnaround was less than a day. Highly recommend Charlie if you need to get any console repaired or modded!

From the call to the service nothing but I can't say enough about the outstanding service I…read morereceived. Spencer is an amazing person who immediately understood what I was dealing with. It took him no more than ten minutes to diagnose the problem. His communication was clear, honest, and professional. He was completely transparent about the cost of the parts that needed to be replaced, which I really appreciated. This is, without a doubt, the best service in town. The efficiency, expertise, and exceptional customer service exceeded my expectations. If I could give Spencer 10 stars, I absolutely would. Highly recommended!

Spencer is an ANGEL! I would ONLY recommend Spencer for purchases and repairs. He was kind enough…read moreto take the time out of his day to help me with a small repair on my printer. It is so hard to find genuinely KIND humans like him on this earth. Plus you are supporting a small business which always feels rewarding to support the community. He is so smart and so kind. I was floored by his expertise and humility. HIGHLY RECOMMENDED!

I became a customer of Jorge's several years ago after finding him on Pioneer's website listed as a…read morecertified technician. I've brought him two sets of Technics 1200s and an Allen & Heath Xone:42 mixer. The first time, while he was still at his Glendale location, he cleaned the contacts and jacks, performed an internal grounding modification, and upgraded the RCA cables on my 1200MK5s. More recently, he performed the same service on my 1200MK2s. His pricing is fair. I believe I paid around $124 for service on my turntables and about $89 for my mixer most recently. The MK5s are my daily drivers, and I've had no issues with them since the service. I haven't had a chance to use my MK2s yet, but based on my experience, I'm confident they'll perform just as well. Jorge is trusted by bedroom DJs like myself, as well as clubs, pro audio dealers, recording studios, and festivals. He and his team also repair CDJs, all in one DJ units, hi-fi equipment, and even microwaves. I've referred a couple of friends to him, and they all sing his praises.

I would not recommend Electro Tech Services to anyone. I took my CD player in for repair, and Jorge…read morekept it for a month and a half without fixing a single thing. First, I was told they received a defective laser. Then I was told the second laser was defective too. Whether that's true or not, after six weeks there was still zero progress. What made the experience even worse was the complete lack of communication. I received virtually no updates and had to keep calling to find out what was going on. After a month and a half, I got my CD player back in the same condition I brought it in. Keeping a customer's equipment for that long with no repair completed and almost no communication is unacceptable. Extremely unprofessional experience and a complete waste of time.

If Alex doesn't know then nobody knows, lol. Great guy and…read morereally knows his stuff. Alex is extremely knowledgeable about everything electronic and has a real respect and appreciation for vintage audio. Where other guys give up, Alex dives a little deeper and gets in done! I highly recommend calling Alex if you are trying to revive and repair your vintage audio equipment.

Alex really knows his stuff, I took in my 1970's Sansui SR-929 turntable and he restored it to…read moreperfect working condition. Replacing god knows how many thing as you'll see in the pics included. I would highly recommend anyone to Alex and the service he provides and at really good prices.

I paid him to come to my house. He dusted the machine and asked me for 200$…read more He promised me that he would get the replacing part. Next I get a bill for him for a whole new machine. I do not recommend him. He is not honest.

The technician quickly fixed my printer's jamming issue and explained the problem clearly. They…read morewere professional, efficient, and made sure everything was running smoothly. Highly recommend for any printer issues!

Ken was awesome! Had to bring my record player here because I accidentally pulled too hard on one…read moreof the inner cables on the tone arm while replacing my cartridge and the pin broke. Figured I just needed to get it soldered. Came here during lunch, and at first, I thought it was closed because they didn't have lights on. But there's a sign on the door that states to call ahead and to wear a mask. Ken quickly picked up my call, heard my issue, and told him I'm outside. Ken was quick to acknowledge my request, and he let me in. There's a $25 diagnostic fee deposit, which goes toward the repair. Which, in my case, means soldering the cable back to the pin connector. Paid with a CC, and he asked for my contact and told me he would call me when it's ready. The next day, he called to tell me it's ready. And violaaaa, my record player works again! Awesome work and awesome hospitality, Ken. I'll see you again next time I break my record player.

Can cleaned gave me an estimate it was reasonable it was honest he repaired my receiver the Kenwood…read more5040 receiver so helpful the quality of his work was just great my receiver sounds crystal clear you gave me a couple of suggestions to do with my wires and it it's really great I love it I'd have to say five stars for Kim and this is the one in Norwalk on Alondra .it was a pleasure having it serviced by Alpha Electronics. All my future needs and servicing I'm going to return to him thank you Ken Lam .

I bought a Delta contractor table saw secondhand. Come to find out the motor had overheated. I took…read morethe motor to several places and called several repair shops and they all said the motor would need a full rewind and would be cheaper just to buy a whole new table saw. However, the table saw was in great shape so I was really hoping to just get the motor repaired. Thank goodness I found Mission Electric Motor on Yelp. The shop owner, Hrant, is the nicest guy. He was also very knowledgeable and honest. He took a look at the motor and said it may just be the start winding that overheated. He wouldn't know for sure until he took it apart. However, if it is just the start winding that overheated, then only that would need a rewind. He gave me a quote to rewind just the start winding and also a quote for a complete rewind. Both quotes were better than all the other places I got quotes from. Fortunately, it ended up being just the start winding that overheated so it did not need a full rewind. I had Hrant repair the motor and it now works better than ever. Before the repair, the motor would take a few seconds to get up to speed. Now, when I hit the start button it starts up instantly. Looking at the new windings, the quality of the wire he used looks better than the one from the factory. Suffice it to say I am very very satisfied with the repair and service I received at Mission Electric Motor. I definitely recommend this place to everyone who has an electric motor that needs repair. Thanks again Hrant.

Afreaking amazing. These guys got my pool pump back in shape the next day. I called a number of…read morepool stores and they all said "oh, you need to buy a new pump. There is no way to fix your old one". Mine had a squealing bearing but was still working. I called these guys and they their immediate response was "sure, bring it by". I did and wow and I happy I did. Pump is silent again and they were able to fix "the unfixable" pump. Thanks for being so skilled and honest guys!